GB/T 36160.1-2018 English PDF

US$339.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 36160.1-2018: Technical specification for distributed energy system of combined cooling, heating and power -- Part 1: Refrigeration and heating subsystem
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 36160.1-2018	339	Add to Cart	4 days	Technical specification for distributed energy system of combined cooling, heating and power -- Part 1: Refrigeration and heating subsystem	Valid

Similar standards

GB 36893   GB 37478   GB 37479   GB 19762   GB 17167   GB/T 36160.2   

Basic data

Standard ID: GB/T 36160.1-2018 (GB/T36160.1-2018)
Description (Translated English): Technical specification for distributed energy system of combined cooling, heating and power -- Part 1: Refrigeration and heating subsystem
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: F01
Classification of International Standard: 27.010
Word Count Estimation: 17,174
Date of Issue: 2018-05-14
Date of Implementation: 2018-12-01
Regulation (derived from): National Standards Announcement No. 6 of 2018
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 36160.1-2018: Technical specification for distributed energy system of combined cooling, heating and power -- Part 1: Refrigeration and heating subsystem

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Technical conditions for distributed cold and hot electricity energy systems Part 1. Refrigeration and heating units) ICS 27.010 F01 National Standards of People's Republic of China Distributed cold and heat energy system technical conditions Part 1. Refrigeration and heating units heatingandpower-Part 1.Refrigerationandheatingsubsystem Published on.2018-05-14 2018-12-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

GB/T 36160 "Technical Conditions for Distributed Cooling and Heating Energy System" is divided into the following three parts. --- Part 1. Refrigeration and heating units; --- Part 2. Power unit; --- Part 3. Energy storage unit. This part is the first part of GB/T 36160. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part is proposed and managed by the National Energy System Standardization Technical Committee (SAC/TC459). This section drafted by. China Architecture Northwest Design and Research Institute Co., Ltd., China National Institute of Standardization, Tsinghua University, East China Architectural Design Research Institute, China Zhongyuan International Engineering Co., Ltd., China Zhongjian Design Group Co., Ltd., South China University of Technology Architectural Design Research Institute, Beijing Architectural Design and Research Institute Co., Ltd., China Architecture Shanghai Design and Research Institute Co., Ltd., China Power Engineering Consulting Group West North Electric Power Design Institute Co., Ltd., North Engineering Design and Research Institute Co., Ltd., Institute of Engineering Thermophysics, Chinese Academy of Sciences, Construction Comprehensive Survey Research and Design Institute Co., Ltd., Hagiwara Cooling System (China) Co., Ltd., Yuanda Air Conditioning Co., Ltd., Hangzhou Yuanpai Technology Co., Ltd. The main drafters of this section. Zhou Min, Cheng Jianhong, Wang Juanfang, Wei Qingyi, Ye Dafa, Li Zhuyu, Man Xiaoxin, Wang Wei, Zhang Jie, Zhao Jian, Fan Tao, Liu Qiang, Liu Meng, Qi Jun, Cui Junkui, Zhao Wei, Yang Guangyao, Zhang Beiwei, Liu Yueqin. Distributed cold and heat energy system technical conditions Part 1. Refrigeration and heating units

1 Scope

This part of GB/T 36160 specifies a distributed cooling and heating energy system cooling and heating unit based on gas or liquid fuel. Classification composition, evaluation indicators, system configuration requirements, operation optimization and management. This section applies to distributed cold and heat energy systems using gas or liquid fuels as primary energy, selection of refrigeration and heating units Type, design optimization and operational management. Among them, the single-machine capacity of the prime mover of the building distributed energy supply station is less than or equal to 10MW; The stand-alone unit capacity of the station can be less than or equal to 25MW. The evaluation indicators used in this section are mainly gas, and liquid fuels can be implemented under the same technical conditions. Does not include compensation in the evaluation indicators The energy output by the cooling device and the energy consumed by the auxiliary system. This section does not apply to the test statistical evaluation of distributed cold and hot energy systems that have been put into operation.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 1576 industrial boiler water quality GB/T 2589 General rules for comprehensive energy consumption calculation GB 13271 Boiler Air Pollutant Emission Standard GB/T 18362 direct-fired lithium bromide absorption type cold (warm) water unit GB/T 18431 steam and hot water type lithium bromide absorption chiller GB/T 29044 Heating and air conditioning system water quality GB/T 30577 gas-steam combined cycle waste heat boiler technical conditions Energy saving rate of GB/T 33757.1 distributed thermal power systems - Part 1. Fossil energy drive systems GB/T 36160.2 Technical requirements for distributed thermal power systems - Part 2. Power units GB/T 34620 Class I lithium bromide absorption heat pump unit GB 50016 Building Design Fire Code GB 50019 Industrial building heating ventilation and air conditioning design specification GB 50028 town gas design code GB 50041 boiler room design specification GB 50050 industrial circulating cooling water treatment design specification GB/T 50155 Terminology standard for heating, ventilation and air conditioning GB 50189 Public Building Energy Efficiency Design Standard GB 50736 Design code for heating, ventilation and air conditioning of civil buildings GB 51131 Gas-fired combined heat and power engineering technical specification DL/T 5508 gas distributed energy station design specification JGJ158 Energy Storage Air Conditioning Engineering Technical Regulations ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 36160.1-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 36160.1-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 36160.1-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 36160.1-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.