Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 35251-2017 English PDF

Q: How long will the true-PDF of English version of GB/T 35251-2017 be delivered?

Upon your order, we will start to translate GB/T 35251-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 35251-2017_English with my colleagues?

Yes. The purchased PDF of GB/T 35251-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35251-2017: Waste pyrolysis and incineration treatment device
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 35251-2017	279	Add to Cart	3 days	Waste pyrolysis and incineration treatment device	Valid

Similar standards

GB/T 40286 GB/T 38220 GB/T 35579 GB/T 35254 GB/T 35250

Basic data

Standard ID: GB/T 35251-2017 (GB/T35251-2017)
Description (Translated English): Waste pyrolysis and incineration treatment device
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J88
Classification of International Standard: 13.020.40
Word Count Estimation: 14,121
Date of Issue: 2017-12-29
Date of Implementation: 2018-07-01
Regulation (derived from): National Standards Bulletin 2017 No. 32
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 35251-2017: Waste pyrolysis and incineration treatment device

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Waste pyrolysis and incineration treatment device ICS 13.020.40 J88 National Standards of People's Republic of China Garbage incineration plant 2017-12-29 Posted 2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 models and specifications 2 5 Requirements 3 6 test method 6 7 inspection and acceptance 7 8 logo, paint, packaging and random files 7 Appendix A (informative) garbage cracking incineration plant structure diagram 9

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by the National Development and Reform Commission. This standard by the National Environmental Protection Industry Standardization Technical Committee (SAC/TC275) centralized. The main drafting units of this standard. Zhejiang Omori Environmental Protection Co., Ltd., Zhejiang State Heavy Machinery Co., Ltd., Hang Shun (Beijing) Technology Exhibition Co., Ltd., Tsinghua University, China National Institute of Standardization, Zhejiang University, Zhejiang Gongshang University, Taizhou Bay circular economy industrial cluster road Zoning Management Committee, Zhejiang Provincial Environmental Monitoring Center, Zhejiang Provincial Environmental Protection Science Design and Research Institute. The main drafters of this standard. Zhang Wenguo, Wang Zhen Yang, Hao Xianglian, Liu Fuqiang, Huang Jin, Cen Kefa, Liang Weiyan, Huang Hongjun, Shen Dongsheng, Ye Heyan, Zhou Xin, Yu Jianbing.

Introduction

In order to carry out "Law of the People's Republic of China on Environmental Protection" and "Law of the People's Republic of China on Prevention and Control of Environmental Pollution by Solid Wastes", insist on refuse incineration Burning treatment of reduction, resource-based, harmless, control of secondary pollution caused by waste incineration, regulate the cracking of incineration of garbage Garbage cracking incineration plant design, manufacture, installation, commissioning, acceptance, etc., specially formulated this standard. Garbage incineration plant

1 Scope

This standard specifies the garbage cracking incineration plant (hereinafter referred to as the device) terms and definitions, models and specifications, requirements, test methods, inspection And acceptance, marking, paint, packaging and accompanying documents. This standard applies to low heat value greater than 4.18MJ/kg of garbage incineration plant. A single device for the handling capacity of 20t/d to 250t/d (including the upper and lower limits). This standard does not apply to the treatment of hazardous waste.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 700 carbon structural steel GB/T 3766 hydraulic drive systems and components of the general rules and safety requirements GB/T 3797 electrical control equipment GB 4053.1 Fixed ladders and platforms - Safety requirements - Part 1. Steel ladders GB 4053.2 Fixed ladders and platforms - Safety requirements - Part 2. Steel ladders GB 4053.3 Fixed ladders and platform safety requirements - Part 3. Industrial guard railings and steel platforms GB 5226.1 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General specifications GB 8978 Integrated Wastewater Discharge Standard GB/T 13306 signs GB/T 14048.1 low-voltage switchgear and control equipment Part 1. General GB 18485 Domestic Waste Incineration Pollution Control Standard GB/T 19867.1 arc welding process GB/T 23294 wear refractory GB 50057 lightning protection design specifications GB 50058 explosion hazardous environment power plant design specifications GB 50093 Automatic Instrumentation Engineering Construction and Quality Acceptance Specification GB 50235 industrial metal pipe construction specifications GB 50273 Boiler Installation Construction and Acceptance Specification CJ/T 313 Garbage sampling and analysis methods Technical specification for construction of electric power HJ/T 20 Industrial solid waste sampling Sampling specifications JB/T 1615 boiler paint and packaging technology conditions JB/T 5000.12 Heavy machinery General technical requirements Part 12. Painting JB/T 7258 general purpose centrifugal blower JB/T 9568 Power system relays, protection and automatic devices General technical conditions NAS1638-2011 Oil Cleanliness Grading Standards ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 35251-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 35251-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 35251-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 35251-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.