GB/T 35160.1-2017 English PDF

US$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35160.1-2017: Test methods for agglomerated stone -- Part 1: Determination of apparent density and water absorption
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 35160.1-2017	119	Add to Cart	3 days	Test methods for agglomerated stone -- Part 1: Determination of apparent density and water absorption	Valid

Similar standards

GB/T 36143   JC/T 908   JC/T 973   GB/T 35160.4   GB/T 35160.5   GB/T 35160.3   

Basic data

Standard ID: GB/T 35160.1-2017 (GB/T35160.1-2017)
Description (Translated English): Test methods for agglomerated stone -- Part 1: Determination of apparent density and water absorption
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Q21
Classification of International Standard: 91.100.15
Word Count Estimation: 6,639
Date of Issue: 2017-12-29
Date of Implementation: 2018-11-01
Regulation (derived from): National Standards Bulletin 2017 No. 32
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 35160.1-2017: Test methods for agglomerated stone -- Part 1: Determination of apparent density and water absorption

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods for agglomerated stone - Part 1. Determination of apparent density and water absorption ICS 91.100.15 Q21 National Standards of People's Republic of China Synthetic stone test methods Part 1. Determination of density and water absorption Part 1.Determinationofapparentdensityandwaterabsorption 2017-12-29 Posted 2018-11-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released

Foreword

GB/T 35160 "synthetic stone test method" is divided into 6 parts. --- Part 1. Determination of density and water absorption; --- Part 2. Determination of bending strength; --- Part 3. Determination of compressive strength; --- Part 4. Determination of wear resistance; --- Part 5. Determination of thermal shock properties; --- Part 6. Determination of impact resistance. This section GB/T 35160 Part 1. This section drafted in accordance with GB/T 1.1-2009 given rules. This part is proposed by China Building Materials Federation. This part of the National Standardization Technical Committee Stone (SAC/TC460) centralized. This section is responsible for the drafting unit. Sinoma Imitation Crystal Institute Co., Ltd. (National Stone Quality Supervision and Inspection Center), building materials industry Technical Supervision Research Center, Dongguan Global Classic New Materials Co., Ltd. The main drafters of this section. Zhou Junxing, Liu Wuqiang, Li Yongqiang, Xu Zhongbao. Synthetic stone test methods Part 1. Determination of density and water absorption

1 Scope

GB/T 35160 provisions of this part of the synthetic stone density and water absorption test terms and definitions, equipment, sample preparation, test Test procedures, test results and test reports. This section applies to the determination of synthetic stone density and water absorption test.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 35165 Synthetic stone terms and classification

3 Terms and definitions

GB/T 35165 and defined by the following terms and definitions apply to this document. 3.1 Density apparentdensity The ratio of the sample mass to the shape and volume, also called the bulk density. 3.2 Water absorption waterabsorption Under indoor temperature and pressure conditions, the sample is immersed in pure water, the maximum amount of water and the percentage of dry sample quality.

4 equipment

4.1 Flat bottom lidded container with anti-oxidant, non-adsorbing support rods or other support devices. 4.2 can maintain the level of the container unchanged device. 4.3 Accuracy of 1s timer. 4.4 Accuracy of not less than 0.01% of the sample mass balance. 4.5 Accuracy of not less than 0.01% of the sample weight scale. 4.6 can keep (70 ± 5) ℃ blast oven. 4.7 Measurement accuracy of not less than 0.5mm size measurement tools. 4.8 dryer.

5 sample preparation

5.1 In the same batch of materials, the preparation of the length and width dimensions of 100mm × 100mm, deviation ± 0.5mm, the thickness of the actual product thickness of the sample ......

Image