GB/T 35-2013 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35-2013: Square head bolts with small head
Status: Valid

GB/T 35: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 35-2013	209	Add to Cart	3 days	Square head bolts with small head	Valid
GB/T 35-1988	199	Add to Cart	2 days	Square head bolts with small head--Product grade B	Obsolete

Similar standards

GB/T 8   GB/T 32.3   GB/T 32.1   GBZ 35   

Basic data

Standard ID: GB/T 35-2013 (GB/T35-2013)
Description (Translated English): Square head bolts with small head
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J13
Classification of International Standard: 21.060.10
Word Count Estimation: 9,967
Older Standard (superseded by this standard): GB/T 35-1988
Quoted Standard: GB/T 2; GB/T 90.1; GB/T 90.2; GB/T 196; GB/T 197; GB/T 1237; GB/T 3098.1; GB/T 3103.1; GB/T 5267.1; GB/T 5276; GB/T 5779.1; GB/T 16938
Regulation (derived from): National Standards Bulletin 2013 No. 9
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the thread size of M5 ~ M48, products are Class B small square head bolts.

GB/T 35-2013: Square head bolts with small head

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Square head bolts with small head ICS 21.060.10 J13 National Standards of People's Republic of China Replacing GB/T 35-1988 Small square head bolts Issued on. 2013-06-09 2014-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is one of the national standard "bolt series of standards", the series includes. --- GB/T 8-1988 square head bolts; --- GB/T 10-2013 countersunk square neck bolts; --- GB/T 11-2013 Shen head nib bolt; --- GB/T 12-2013 head square neck bolts; --- GB/T 13-2013 round with mortise bolts; --- GB/T 14-2013 oval head square neck bolts; --- GB/T 15-2013 oval head nib bolt; --- GB/T 27-2013 hex head bolt reinforcing rods; --- GB/T 28-2013 hex head bolt reinforcing rods screw hole; --- GB/T 29.1-2013 hexagon head bolts with slot; --- GB/T 29.2-2013 Cross recessed hexagon head bolts; --- GB/T 31.1-2013 hexagon head bolts with; --- GB/T 31.2-1988 hexagon head bolts with a thin rod; --- GB/T 31.3-1988 hexagon head bolts with fine teeth; --- GB/T 32.1-1988 hexagon head bolt hole; --- GB/T 32.2-1988 hexagon head with holes bolt shank; --- GB/T 32.3-1988 hexagon head bolts with wire holes tooth; --- GB/T 5780-2000 hex head bolts Grade C; --- GB/T 5781-2000 hex head bolt Full thread Class C; --- GB/T 5782-2000 hex head bolts; --- GB/T 5783-2000 hex head bolts - Full thread; --- GB/T 5784-1986 hex head bolt shank; --- GB/T 5785-2000 hex head bolts with fine teeth; --- GB/T 5786-2000 hex head bolt fine pitch full thread; --- GB/T 5789-1986 hex flange bolts to increase the Series B grade; --- GB/T 5790-1986 hex flange bolts Heavy series B grade; --- GB/T 16674.1-2004 Hexagon flange bolts small series; --- GB/T 16674.2-2004 Hexagon flange bolts with fine teeth small series. This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 35-1988 "small square head bolts B level." This standard compared with GB/T 35-1988 main changes are as follows. --- Modify the standard name; --- Update normative references (Chapter 2); --- According to a preferred level thread is divided into. Preferred specifications and dimensions (Table 1) and non-preferred specifications and dimensions (Table 2); --- In "Common lengths range" instead of "General specifications" (see Table 1, Table 2); --- Increase general technical conditions (Table 3). The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee fasteners (SAC/TC85) centralized. This standard is drafted by. Productivity Promotion Center in the machine. Participated in the drafting of this standard. Jinan Shida Fastener Co., Ltd., general industrial machinery parts and components product quality supervision and inspection center. This standard replaces the standards previously issued as follows. --- GB 35-1958, GB 35-1976, GB/T 35-1988. Small square head bolts

1 Scope

This standard specifies the thread size of M5 ~ M48, product grade of B small square head bolts.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. The end of the GB/T 2 fasteners threaded part GB/T 90.1 Fasteners acceptance inspection GB/T 90.2 Fasteners marking and packaging GB/T 196 common thread basic size GB/T 197 common thread tolerance GB/T 1237 marking method fasteners GB/T 3098.1 Mechanical properties of fasteners Bolts, screws and studs GB/T 3103.1 Tolerances for fasteners - Bolts, screws, studs and nuts GB/T 5267.1 fasteners plating layer GB/T 5276 Fasteners Bolts, screws, studs and nuts - Symbols and designations size GB/T 5779.1 Fasteners - Surface discontinuities - Bolts, screws and studs for general requirements GB/T 16938 Fasteners Bolts, screws, studs and nuts conditions

3 Dimensions

Type dimensions shown in Figure 1, the preferred specifications and dimensions are shown in Table 1 and a non-preferred specifications and dimensions are shown in Table 2. Size code labeling and methods in line with GB/T 5276. Unthreaded portion of the shank diameter approximately equal to the pitch diameter or large diameter screw. the end of a rolling system (GB/T 2). figure 1 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 35-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 35-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 35-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 35-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 35-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 35-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.