GB/T 34835-2017 English PDF

US$414.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34835-2017: Electrical safety -- Classification of interfaces for equipment to be connected to information and communications technology networks
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 34835-2017	414	Add to Cart	3 days	Electrical safety -- Classification of interfaces for equipment to be connected to information and communications technology networks	Valid

Similar standards

GB 38189   GB 8898   GB/T 20282   GB/T 43786   GB/T 12113   

Basic data

Standard ID: GB/T 34835-2017 (GB/T34835-2017)
Description (Translated English): Electrical safety -- Classification of interfaces for equipment to be connected to information and communications technology networks
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L09
Classification of International Standard: 35.020
Word Count Estimation: 22,257
Date of Issue: 2017-12-29
Date of Implementation: 2018-04-01
Regulation (derived from): National Standards Bulletin 2017 No. 32
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 34835-2017: Electrical safety -- Classification of interfaces for equipment to be connected to information and communications technology networks

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electrical safety - Classification of interfaces for equipment to be connected to information and communications technology networks ICS 35.020 L09 National Standards of People's Republic of China Electrical Safety and Information Technology and Communication Technology Network Interface classification of connected devices (IEC /T R62102.2005, IDT) 2017-12-29 Posted 2018-04-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Reference Configuration 5 5 Security category for interfaces to information technology and communications technology networks 6 6 factors affecting the interface security 7 7 determine the type of circuit 8 Appendix A (informative) Interface considerations Appendix B (Informative) Specific Network Interface Application Example 11 Appendix C (informative) to meet the conditions of the network environment 0 Appendix D (informative) SELV circuit and TNV circuit voltage range 15 References 16

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the translation method identical with IEC /T R62102.2005 "Electrical Safety and Information Technology and Communication Technology Network Connection Prepared interface classification. " The documents of our country that are consistent with the corresponding international documents that are normative references in this standard are as follows. --- GB 4943.1-2011 Information technology equipment safety Part 1. General requirements (IEC 60950-1.2005, MOD) This standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This standard by the People's Republic of China Ministry of Industry and Information Technology (E) centralized. This standard drafting unit. Guangzhou 赛 West Standard Institute of Testing and Research Co., Ltd., China Electronics Standardization Institute, Beijing 赛 West Technology Development Co., Ltd., China National Accreditation Center for Conformity Assessment. The main drafters of this standard.Wang Liwen, Guo Ziqi, Chen Di, Cao Jinzhu, Huang Junying, He Penlin.

Introduction

This standard provides guidelines for equipment interface security requirements. The standard lists some of the interfaces and describes their safety categories. This standard Does not contain detailed conformance test content unless used in conjunction with product standards such as IEC 60950-1 and IEC 60950-21. The equipment safety standards IEC 60950-1 and IEC 60950-21 specify the circuit by SELV circuit, TNV circuit, RFT circuit And dangerous voltage circuit (relative to other circuits) classification requirements. For standalone devices, it is relatively easy to determine their different circuit classes. But some Device, has a data interface and is intended to be connected locally with other devices or over a network. In this case, are scheduled to be connected together The security categories of the interfaces should match each other. Sometimes, the remote device's interface category may not be known. Such as communications equipment and data processing equipment through Different types of interfaces and networks are connected together. To avoid this, it is necessary to classify the interfaces that are applied to such devices and to choose the security for the device interfaces and network types Category. Similarly, in order to prevent equipment and network damage, the interface should be classified. Relevant protections made by the ITU-TK series of Recommendations put forward. Electrical Safety and Information Technology and Communication Technology Network Interface classification of connected devices

1 Scope

This standard applies to the device interface. The interfaces within these devices may be connected to the communications network and may constitute one of the communications network architectures Part, it may also provide local data transfer. This standard in accordance with IEC 60950-1 and IEC 60950-21 defined in the type of circuit, communication After analyzing the network characteristics, we give a guide to the classification of interfaces. This standard deals only with properly interconnected devices, but does not concern the damage caused by one device to another connected to it. Special case love The condition is that the interface may be designed for different purposes at different levels. In this case you should ensure that only the same safety category and Protection level interfaces can be connected together. This is based on specifications (available specifications) from equipment manufacturers and network providers, As well as information on the type of power interface installation. This standard is for use by equipment manufacturers, network operators, network managers/licensors, standard writers and network installers. it Various interfaces for the device. The network form is different from the equipment and therefore not included in IEC 60950-1 and IEC 60950-21, It is not included in this standard. However, when determining which device interface requirements apply (eg SELV circuits, TNV-1 circuits, TNV-2 circuit, TNV-3 circuit, etc.), it is necessary to consider the characteristics, installation and form of the communication network. If you use standard design equipment other than IEC 60950-1 and IEC 60950-21 and their interfaces (for example, IEC 62151 and Phase Other product safety standards), the priority is to use the corresponding requirements of other standards. If there is a conflict between this standard and the more detailed specification, the latter shall prevail. The use of this standard does not take into account the equipment or network installation and maintenance ownership or responsibility attribution. Note. When used in a commercial environment, the terminal equipment is usually connected to a client cable, which has a separate standard for this type of cable.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. IEC 60950-1.2001 Information technology equipment safety Part 1. General requirements (Informationtechnologyequip- ment-Safety-Part 1.Generalrequirements) IEC 60950-21.2002 Information technology equipment security - Part 21. Remote feeding (Informationtechnologyequip- ment-Safety-Part 21.Remotepower)

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Derived from the terms and definitions IEC 60950-1 3.1.1 AC mains power ACmainssupply AC power distribution systems external to the equipment powered by AC power. These include common or dedicated power supplies, Unless otherwise provided in this section, but also includes the equivalent power, such as motor-driven generator and uninterruptible power supply. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 34835-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 34835-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 34835-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 34835-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.