Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 34630.2-2017 English PDF

Q: How long will the true-PDF of English version of GB/T 34630.2-2017 be delivered?

Upon your order, we will start to translate GB/T 34630.2-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 34630.2-2017_English with my colleagues?

Yes. The purchased PDF of GB/T 34630.2-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34630.2-2017: Friction stir welding -- Aluminium and its alloys -- Part 2: Design of weld joints
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 34630.2-2017	199	Add to Cart	3 days	Friction stir welding -- Aluminium and its alloys -- Part 2: Design of weld joints	Valid

Similar standards

GB/T 37778 GB/T 34628 GB/T 32259 GB/T 34630.4 GB/T 34630.5 GB/T 34630.3

Basic data

Standard ID: GB/T 34630.2-2017 (GB/T34630.2-2017)
Description (Translated English): Friction stir welding -- Aluminium and its alloys -- Part 2: Design of weld joints
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J33
Classification of International Standard: 25.160.40
Word Count Estimation: 10,127
Date of Issue: 2017-09-29
Date of Implementation: 2018-04-01
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 34630.2-2017: Friction stir welding -- Aluminium and its alloys -- Part 2: Design of weld joints

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Friction stir welding - Aluminiumand its alloys - Part 2. Design of weld joints ICS 25.160.40 J33 National Standards of People's Republic of China Friction stir welding aluminum and aluminum alloy Part 2. Welding joint design Frictionstirwelding-Aluminiumanditsaloys-Part 2.Designofweldjoints (ISO 25239-2.2011, Frictionstirwelding-Aluminum- Part 2.Designofweldjoints, MOD) 2017-09-29 Posted 2018-04-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1

4 design requirements

Appendix A (informative) Common aluminum alloy friction stir welding joint example 6

Foreword

GB/T 34630 "friction stir welding aluminum and aluminum" is divided into five parts. --- Part 1. Terms and definitions; --- Part 2. Welding joint design; --- Part 3. Welding operators skills assessment; --- Part 4. Welding procedure procedures and assessment; --- Part 5. Quality and inspection requirements. This section GB/T 34630 Part 2. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses the redrafted law Amendment uses ISO 25239-2.2011 "Friction stir welding aluminum Part 2. Welded joint design" (English version). This standard and ISO 25239-2.2011 technical differences and the reasons are as follows. --- On the normative references, this section made a technical difference with the adjustment to adapt to China's technical conditions, adjust the situation Concentration reflected in the second chapter "Normative references", the specific adjustments are as follows. ● The international standard quoted in ISO 25239-2.2011 should be replaced by the corresponding standard in our country. ● Increased reference to GB/T 3375 "welding terminology" to facilitate our practical application. --- Increased butt welded joint assembly (such as the root gap, wrong edge, etc.) requirements. This section also made the following editorial changes. --- The standard name was changed to "friction stir welding aluminum and aluminum alloy Part 2. Welding joint design"; --- Increased information Appendix A aluminum alloy friction stir welding joints commonly used forms. This part of the National Welding Standardization Technical Committee (SAC/TC55) and focal point. This part of the drafting unit. Shanghai Aerospace Equipment Manufacturing Plant, the car in Qingdao Sifang Locomotive Co., Ltd., Institute of Mechanical Science Harbin Welding Institute. The drafters of this section. Zhao Huihui, Fang Xifeng, Feng Xiaosong, Guo Li Jie, Xiong Yan Yan, Yin Yuhuan, Zhang Chengcong, Zhang Chunbo. Friction stir welding aluminum and aluminum alloy Part 2. Welding joint design

1 Scope

GB/T 34630 provisions of this part of aluminum and aluminum alloy friction stir welded joints design requirements. This section applies to aluminum and aluminum alloy friction stir welding.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 324 weld symbol notation (GB/T 324-2008, ISO 2553.1992, MOD) GB/T 3375 welding terminology GB/T 34630.1 friction stir welding aluminum and aluminum alloy - Part 1. Terms and definitions (GB/T 34630-2017, ISO 25239-1.2011, MOD) GB/T 34630.3 friction stir welding aluminum and aluminum alloy - Part 3 welding skills assessment of operators (GB/T 34630- 2017, ISO 25239-3.2011, MOD) GB/T 34630.4 friction stir welding aluminum and aluminum alloys - Part 4. Welding procedures and assessment (GB/T 34630.4- 2017, ISO 25239-4.2011, MOD) GB/T 34630.5 friction stir welding aluminum and aluminum alloys - Part 5. Quality and inspection requirements (GB/T 34630.5-2017, ISO 25239-5.2011, MOD)

3 Terms and definitions

GB/T 3375, GB/T 34630.1 defined terms and definitions apply to this document.

4 design requirements

4.1 documents The document should specify the basic and all special requirements for the weld, such as the critical breaking point, service life, reliability Or safety. The document shall specify the main process controls to ensure that the welds produced by welding procedure and inspection meet all design requirements. Weld symbol should be in accordance with GB/T 324. 4.2 connector design 4.2.1 Overview Weldment should be designed to meet the requirements to ensure that it can achieve the final performance requirements. Welding joint design should consider the necessary material performance data, some welded joints example see Table 1, part of the aluminum alloy stirring friction See Appendix A for examples of wiper joints. ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 34630.2-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 34630.2-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 34630.2-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 34630.2-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.