GB/T 34626.1-2017 English PDFUS$519.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 34626.1-2017: Metallic and other inorganic coatings -- Cleaning and preparation of metal surfaces -- Part 1: Ferrous metals and alloys Status: Valid
Basic dataStandard ID: GB/T 34626.1-2017 (GB/T34626.1-2017)Description (Translated English): Metallic and other inorganic coatings -- Cleaning and preparation of metal surfaces -- Part 1: Ferrous metals and alloys Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A29 Classification of International Standard: 25.220.20; 25.220.40 Word Count Estimation: 26,252 Date of Issue: 2017-09-29 Date of Implementation: 2018-04-01 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 34626.1-2017: Metallic and other inorganic coatings -- Cleaning and preparation of metal surfaces -- Part 1: Ferrous metals and alloys---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Metallic and other inorganic coatings-Cleaning and preparation of metal surfaces-Part 1. Ferrous metals and alloys ICS 25.220.20; 25.220.40 A29 National Standards of People's Republic of China Metal and other inorganic coatings Cleaning and preparation of metal surfaces Part 1. Steel and its alloys metalsurfaces-Part 1.Ferrousmetalsandaloys (ISO 27831-1.2008, MOD) 2017-09-29 Posted 2018-04-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 the buyer should provide the necessary information to the processor 2 5 Requirements 2 6 standard cleaning method 3 7 non-corrosion-resistant steel, cast iron and pure iron 4 8 corrosion and heat-resistant steel 9 9 powder coating before the metal pretreatment 10 10 cleaning and preparation process 11 10.1 Process A - Organic Solvent Degreasing and Cleaning 11 10.2 Process B-alkaline degreasing 12 10.3 C-Acid Craft Cleaning 13 10.4 Process D-Mechanical Cleaning 13 10.5 Process E-caustic descaling 14 10.6 Process F - Non-electrolytic pickling 14 10.7 G-acid leaching process 15 10.8 Process H-Anodizing 15 10.9 Process J-Acid Rust 16 10.10 Process K-base rust 16 10.11 Technology L-steel chemical leveling and electrolytic polishing 17 10.12 Process M-passivation, corrosion-resistant steel surface contamination removal and surface preparation before plating 18 Appendix A (Informative) Organic and vapor degreasing bath maintenance 20 Appendix B (informative) steam cleaning tank acidity control 21 Appendix C (Informative) sulfuric acid method for the detection of oxidizable substances 22 References 23 ForewordGB/T 34626 "metal and other inorganic coating surface cleaning and preparation" is divided into two parts. --- Part 1. Steel and its alloys; --- Part 2. Non-ferrous metals and their alloys. This section GB/T 34626 Part 1. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses redrafted law revision using ISO 27831-1.2008 "metal and other inorganic surface coating metal cleaning and Prepare Part 1. Steel and its alloys. " This part of ISO 27831-1.2008 compared with the technical differences and the reasons are as follows. --- On normative references, this standard made a technical difference with the adjustment to adapt to China's technical conditions, adjust the situation Concentration reflected in the second chapter "Normative references", the specific adjustments are as follows. ● Replace ISO 2080 with GB/T 3138 equivalent to international standards (see Chapter 3); ● Replace ISO 2064 with GB/T 12334 equivalent to international standards (see Chapter 3); ● Replace ISO 4527 with GB/T 13913 equivalent to international standards (see 7.1); ● Replace ISO 9587 (see 7.1.2) with GB/T 19349 equivalent to international standards; ● Replace GB/T 19350 equivalent to ISO 9588 (see 7.1.4) with an equivalent international standard; ● Replace ISO .22779 (see 7.1.13) with GB/T 31566 equivalent to the international standard. This part is proposed by China Machinery Industry Federation. This part of the National Metal and Nonmetallic Coating Standardization Technical Committee (SAC/TC57) centralized. The main drafting units in this section. Foshan Branch Technology Co., Ltd., Zhaoqing College, Ma On Shan Dingtai Rare Earth New Materials Co., Ltd., Buddha Shashi Bay New Materials Technology Co., Ltd., Guangdong Dazhi Environmental Protection Technology Co., Ltd., Zhongshan Sun Chemical Technology Co., Ltd., Whirlpool Min (Fujian) Chemical Industry Co., Ltd., Dongguan City, Di New Materials Technology Co., Ltd., Wuhan Institute of Materials Protection, Dongguan City, the capital Electrical Technology Co., Ltd., Shandong Taifeng Cleaning Technology Co., Ltd., COSCO rare earth New Materials Co., Ltd., Shenzhen Branch of a standard service center. The main drafters of this section. Zhong Ping, drainage beautiful, ancient Xiaoyan, Yuan Xing, Guo Haifu, Liu Ji Lu, Shi Zhimin, Xu Lixin, Liu Hongxia, Tang Wanxiong, Fang Bin, Wang Yang, Jia Jianxin, Zou Baogen, Xu Guishun, Xu Guanglin, Zeng Shujun.IntroductionThe adhesion of the coating depends on the effect of degreasing and cleaning of the substrate surface. For plating (coating), it is necessary to remove the manufacturing process The resulting grease, oil, dirt, or other forms of contaminants formed as a result of corrosion/erosion during storage and use to obtain a non-corrosive, clean, Chemically active surface. Surface contaminants may be. --- Steel and non-ferrous metal castings on the corrosion products, sand or mold release agent; --- Corrosion products and scale (such as hot rolled steel, steel beams, etc.) (for the substrate, the crushed scale is the cathode); --- Oil on the cold-rolled steel and rolling lubricant; --- Rolling aluminum rolling lubricant; --- Hot-dip galvanized steel, steel/bracket in the transport or storage process of corrosion products; --- Storage and handling of other pollutants generated in the process. It is well known that plating/coating the surface of these materials is difficult. There are many ways to remove surface contaminants, among other factors, depending on the type and level of pollutants The size and shape of the body, the cleanliness requirements, the availability of the necessary facilities, the cost of the treatment and its impact on the environment, Process characteristics. GB/T 34626 listed cleaning methods, covering the mechanical method (this method to achieve the lowest degree of cleanliness), chemical and ultrasonic methods ( To achieve relatively high cleanliness) and glow discharge plasma treatment (sputter cleaning) of the substrate before vapor deposition. GB/T 34626 lists the coating (coated) with or without coating the coating layer, the metal and its alloys cleaning practical method. The cleaning process given in GB/T 34626.1 and GB/T 34626.2 is only the most commonly practiced method in practice. However, many solutions do Square programs and special handling methods are not included in GB/T 34626.1 and GB/T 34626.2. This standard references these as much as possible Special treatment method For reference GB/T 34626 parts given in other treatment processes, refer to the standard parts of the reference Listed publications. GB/T 34626.1 applies to steel and its alloys, and GB/T 34626.2 applies to non-ferrous metals and alloys. In order to make as much as possible GB/T 34626.2 as a separate standard document to use, GB/T 34626.1 chapters 1 to 6 are contained in GB/T 34626.2 , Also Chapter 1 to Chapter 6, other terms according to the order of GB/T 34626.1 numbering. In addition, some of GB/T 34626.1 for steel Material cleaning and preparation process can also be applied to non-ferrous metal materials, therefore, these cleaning and preparation process also according to GB/T 34626.1 Shun Sort and use the same name. Metal and other inorganic coatings Cleaning and preparation of metal surfaces Part 1. Steel and its alloys Warning --- GB/T 34626 this part of the use of some of the substances and processes, if you do not take appropriate measures, will have a health risk harm. This standard does not discuss any health hazards, safety or environmental issues and regulations involved in the use of the standard. Producer, buyer and Standard users are responsible for establishing appropriate health, safety and environmental regulations and taking appropriate measures to bring them into line with national, local and international Regulations and regulations. Compliance with this section does not imply a legal exemption.1 ScopeGB/T 34626 provisions of this part of the steel and its alloy surface cleaning process. This section applies to remove any irrelevant or undesirable deposits and other pollutants generated during the production, storage and use, And for the metal surface to prepare for the next step. This section does not apply to the initial use of the process of accumulation of oil, grease and dirt and other heavy sediments initial cleaning operations, preparation of electrical contacts before welding Or wash. However, the user is free to decide whether or not to use the many treatment procedures given in this section for the above cleaning operations. This section covers the process is plated (coating) the following coating before the required metal surface preparation. --- Electroplating metal layer; --- Self-catalytic metal plating (autocatalytic and replacement); --- Conversion film; --- Hot dip coating; --- Metal spray coating; --- Diffusion coating; --- Enamel coating; --- physical vapor deposition of aluminum and cadmium layer; --- Powder coating. This section describes the following process. --- Degreasing --- descaling --- pickling; --- Rust --- Chemical polishing; ---Electrolytic polishing. The above process applies to the following metals. --- Not corrosion-resistant steel, cast iron and pure iron; --- Corrosion-resistant steel and heat-resistant steel.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 34626.1-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 34626.1-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 34626.1-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 34626.1-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
