GB/T 3410.1-2008 English PDFUS$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3410.1-2008: Instrument for dam monitoring -- Joint meter -- Part 1: Unbonded elastic wire resistance joint meter Status: Valid GB/T 3410.1: Historical versions
Basic dataStandard ID: GB/T 3410.1-2008 (GB/T3410.1-2008)Description (Translated English): Instrument for dam monitoring -- Joint meter -- Part 1: Unbonded elastic wire resistance joint meter Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: P10 Classification of International Standard: 07.060 Word Count Estimation: 17,161 Date of Issue: 2008-02-15 Date of Implementation: 2008-05-01 Older Standard (superseded by this standard): GB/T 3410-1994 Quoted Standard: GB/T 191; GB/T 5080.7; GB/T 6388; GB 9969.1 Regulation (derived from): National Standard Approval Announcement 2008 No.2 (Total No.115) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the differential resistance of joint meter product structure, specifications and main parameters, technical requirements, test methods, inspection rules, signs and instructions, and packaging, transport, storage and so on. This section applies to a structure buried monitoring displacement or expansion joint opening degree of joint meter differential resistance in a variety of geotechnical engineering. GB/T 3410.1-2008: Instrument for dam monitoring -- Joint meter -- Part 1: Unbonded elastic wire resistance joint meter---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Instrument for dam monitoring Joint meter Part 1. Unbonded elastic wire resistance joint meter ICS 07.060 P10 National Standards of People's Republic of China Replacing GB/T 3410-1994 Dam monitoring instrument joint meter Part 1. Differential resistance joint meter Posted 2008-02-15 2008-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms, definitions, symbols and units 1 4 product structure, the main parameters 2 5 Technical requirements 3 6 Test Method 4 7 7 inspection rules 8 Marking and instructions 7 9 packaging, transportation and storage 8 Appendix A (normative) parameter differential resistance joint meter to measure the temperature of 10 A. 1 differential resistance joint meter (hereinafter referred to as sensors) calibration curve between the resistance and temperature 10 A. 2 calibration curve fitting polyline 10 A. 3 differential resistance joint meter temperature calculation 11ForewordGB/T 3410 "joint meter dam monitoring instrument" is divided into five parts. --- Part 1. Differential resistance joint meter; --- Part 2. Vibrating wire joint meter; --- Part 3. capacitive joint meter; --- Part 4. potentiometer type joint meter; --- Part 5. differential transformer joint meter. This section GB/T 3410 Part 1, is GB/T 3410-1994 "differential resistance joint meter" amendments. versus GB/T 3410-1994 compared to the main changes are as follows. --- Increase in the foreword, the terms, definitions, symbols and units, reliability requirements and other relevant content; --- Revised the scope of application; --- Revised the "insulation resistance", "stability requirements", "resistance to transport chatter performance" and so on; --- In the "main argument", the addition of new specifications, dimensions and measuring range; --- Removed in GB/T 3410-1994 longitudinal stiffness K, shear capacity, deformation over the range limit; --- In the "test", modify the "reference test conditions," "normal test atmospheric conditions" and other environmental test conditions defined content; --- On the "inspection rules", the "factory inspection" and "type test" under the relevant eligibility determination content has been adjusted; --- Modify and supplement the "logo", "Manual", "Packaging", "transport" and "storage" and other related content. This part of GB/T 15406 "geotechnical engineering instrument basic parameters and general technical conditions" and other standards coordinated the technical content Consistent. This section of Appendix A normative appendix. This section proposed by the People's Republic of China Ministry of Water Resources. This part of the jurisdiction of the People's Republic of China Ministry of Water Resources. This part mainly drafted by. MWR hydrological instruments and geotechnical engineering Instrument Quality Supervision and Testing Center, the State Power Company Nanjing Electric Power Automation Equipment Factory, Nanjing Automation Research Institute of State Grid, Hydrology and Water Nanjing Hydraulic Research Institute of Automation. Participated in the drafting of this section. the country's industrial production permit office hydrological instruments and geotechnical engineering Instrument Examination Department. The main drafters of this section. Zhang Dekang, Wei Lin, a new chapter, Lu Youqing, Shi Minghua. The drafters of some of the participants. Miss Xu. This part of the standard replaces the previous editions are. --- GB 3410-1982, GB/T 3410-1994. Dam monitoring instrument joint meter Part 1. Differential resistance joint meter1 ScopeGB/T 3410 provisions of this part of the differential resistance joint meter product mix, specifications and main parameters, technical requirements, test side Method, inspection rules, marking and instructions for use, as well as packaging, transportation, storage and so on. Differential resistance measurement This section applies to embedded monitoring structure displacement or expansion joints in the open in various geotechnical engineering degree (deformation) Joint meter.2 Normative referencesThe following documents contain provisions which, through reference to GB/T 3410 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 191 Packaging - Pictorial signs GB/T 5080.7 Equipment reliability testing efficiency constant failure rate assumption under the MTBF of test plans GB/T 6388 transport package shipping mark GB 9969.1 Instructions General Industrial Products GB/T 15406 geotechnical engineering instrument basic parameters and general technical conditions GB/T 15464 instrumentation packaging technology GB/T 50279 Standard for fundamental terms of geotechnical engineering 3 Terms, definitions, symbols and units GB/T 50279 and established the following terms, definitions, symbols and units applicable to GB/T 3410 of this part. 3.1 Long-term measurement of structure displacement or degree of opening of the expansion joints (Deformation) sensors. 3.2 In a pair of differential changes in the wire joint meter measuring deformation as the sensing element. 3.3 Sensitive elements of the two differential change in wire resistance values \u200b\u200bR1 and R2 ratio. Z = R1R2 3.4 Differential resistance joint meter resistance ratio measured value when compared with the resistance change amount corresponding to the amount of input is zero. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3410.1-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 3410.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3410.1-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3410.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 3410.1-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3410.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
