GB/T 3390.5-2013 English PDFUS$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3390.5-2013: Hand operated socket wrenches -- Inspection, packaging and marking Status: Valid GB/T 3390.5: Historical versions
Basic dataStandard ID: GB/T 3390.5-2013 (GB/T3390.5-2013)Description (Translated English): Hand operated socket wrenches -- Inspection, packaging and marking Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J47 Classification of International Standard: 25.140.30 Word Count Estimation: 5,520 Older Standard (superseded by this standard): GB/T 3390.5-2004 Quoted Standard: GB/T 2828.1; GB/T 2829; GB/T 5305 Regulation (derived from): National Standards Bulletin No. 22 of 2013 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies: Manual socket wrench inspection rules, packaging and logo. This standard applies to: assembly and disassembly hex bolts and nuts Hand wrenches. GB/T 3390.5-2013: Hand operated socket wrenches -- Inspection, packaging and marking---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Hand operated socket wrenches. Inspection, packaging and marking ICS 25.140.30 J47 National Standards of People's Republic of China Replacing GB/T 3390.5-2004 Manual socket wrench inspection rules, packaging and marking Issued on. 2013-11-12 2014-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 3390 "Manual socket wrench," the national standard for the series, is composed of five standard components. --- GB/T 3390.1 Manual socket wrench socket; --- GB/T 3390.2 manual transmission mortise and tenon and socket wrenches square hole; --- GB/T 3390.3 manual transmission accessory socket wrenches; --- GB/T 3390.4 manual socket wrenches connection accessories; --- GB/T 3390.5 manual socket wrenches inspection rules, packaging and marking. This standard GB/T 3390 Item 5. This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 3390.5-2004 "Manual socket wrench inspection rules, packaging and marking" and GB/T 3390.5-2004 Compared to the main technical content changes are as follows. --- Of test items have been adjusted (2004 edition Table 1, Table 1 edition); --- Increasing the type test (edition 3.2); --- Increased product marking requirements (edition 4.1). The standard proposed by China National Light Industry Council. This standard by the National Standardization Technical Committee, hardware tools Hardware Technical Committee (SAC/TC174/SC2) centralized. This standard is drafted by. Ningbo An extension Industrial Co., Deng Wei, Li tool Group Co., Ltd., Hangzhou star technology shares have Limited, Shanghai Industrial Tool Institute. Participated in the drafting of this standard. Zhejiang extension into the Hardware Tools Co., Ltd. Zhejiang 4 Tools Co., Ltd. Hangzhou Huafeng giant arrow tools Limited, Ningbo Great Wall Precision Industrial Co., Ltd., easy to get Greenlee (Shanghai) Co., Ltd., Ningbo De Cheng Tools Co., Ltd., Jiangsu Sainty International Group Jiangdu Tools Co., Ltd. Shenyang Europe and Thailand · Qaeda torque Technology Co., Ltd. The main drafters. Zhang Jinqing, Jujia Ping, Wang Weiyi, Wu Zu Xun, Li Guangxiao, Qiurui Long, Wang law, Chen Lihai, hanging Zhu Xin, Yin Qian Flat, Zoujia Ping, Chang Liang Bin, Gu Qing. This standard replaces the standards previously issued as follows. --- GB/T 3390.5-1982, GB/T 3390.5-1989, GB/T 3390.5-2004. Manual socket wrench inspection rules, packaging and marking1 ScopeThis standard specifies the inspection rules manual socket wrench, packaging and marking. This standard applies to detachable hexagonal bolts and nuts manual wrench.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (GB/T 2828.1-2012, ISO 2859-1.1999, IDT) GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test) GB/T 5305 Hand tools, packaging, labeling, transportation and storage3 inspection rules3.1 delivery inspection 3.1.1 All products must be inspected before leaving the factory after factory, along with product certification. 3.1.2 delivery inspection items by sub-sampling program GB/T 2828.1 provisions one by one. 3.1.3 The test sample may be composed of the same specifications, but also by a whole set of products. 3.1.4 Classification substandard products, test items, acceptance quality limit (AQL) and check the level specified in Table 1. Table 1 failure classification, test items, the reception quality limit (AQL) and inspection level No. substandard classification test items Acceptable quality level (AQL) Inspection level (IL) The size of the sleeve on the side Sleeve and accessory torque Sleeve hardness and accessories 2.5 S-3 S-2 Sleeve basic dimensions and accessories Binding properties Driving square with square hole Operating performance Sleeve surface quality and Accessories 6.5 S-3 3.1.5 the inspection found nonconforming product samples and conduct post-failure test, delivery party should be replaced. 3.1.6 Upon examination of rejected product, the manufacturer may be reclassified after repair, and then submit acceptance. 3.1.7 inspection batch by the suite of products consisting of any one component in the test was sentenced to be ineligible, should all inspection installment of the component into the Repair or replace the line after re-inspection. ...... |
