GB/T 3386.2-2007 English PDF

US$134.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3386.2-2007: Electrical and pneumatic analogue chart recorders for use in industrial-process control systems -- Part 2: Guidance for inspection and routine testing
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 3386.2-2007	134	Add to Cart	3 days	Electrical and pneumatic analogue chart recorders for use in industrial-process control systems -- Part 2: Guidance for inspection and routine testing	Valid

Similar standards

GB/T 9081   GB/T 21296.5   DL/T 680   GB/T 35585   GB/T 35145   GB/T 9249   

Basic data

Standard ID: GB/T 3386.2-2007 (GB/T3386.2-2007)
Description (Translated English): Electrical and pneumatic analogue chart recorders for use in industrial-process control systems -- Part 2: Guidance for inspection and routine testing
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N14
Classification of International Standard: 17.220.20
Word Count Estimation: 5,533
Date of Issue: 2007-09-12
Date of Implementation: 2008-05-01
Adopted Standard: IEC 60873-2-2004, IDT
Regulation (derived from): China Announcement of Newly Approved National Standards No. 12 of 2007 (No. 112 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard applies to the process control signal using standardized work (industrial process control systems) electric and pneumatic analogue chart recorders, including continuous marking and RBI recorder and multi-point and multi- pen recorder. Some tests may not apply to all loggers, and certain types of recorders may need additional tests. This section is intended for electric and pneumatic analogue chart recorders for inspection and routine testing, such as testing or acceptance testing after repair to provide technical guidance. Full Performance Test or in the harsh conditions (such as: high temperature) using the recorder should adopt GB/T3386. 1. Whenever possible, the provisions shall GB/T18271 test, trial and personnel must be familiar with the standards. Quantitative criteria for acceptable performance should be determined in consultation with the user by the manufacturer. The test report shall specify those tests done. The requirements of this section shall be in agreement with the manufacturer and the user agrees to take effect.

GB/T 3386.2-2007: Electrical and pneumatic analogue chart recorders for use in industrial-process control systems -- Part 2: Guidance for inspection and routine testing

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electrical and pneumatic analogue chart recorders for use in industrial-process control systems Part 2. Guidance for inspection and routine testing ICS 17.220.20 N14 National Standards of People's Republic of China GB/T 3386.2-2007/IEC 60873-2.2004 Industrial process control systems Electric and pneumatic analogue chart recorders Part 2. Inspection and routine testing (IEC 60873-2.2004, IDT) Posted 2007-09-12 2008-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 3386 "industrial process control systems with electric and pneumatic analogue chart recorders" is divided into two parts. --- Part 1. Methods for performance evaluation; --- Part 2. Inspection and routine testing. This section GB/T 23386 Part of, identical with IEC 60873-2.2004 "industrial process control systems with electric and pneumatic Analogue chart recorders - Part 2. Inspection and routine testing. " This section is equivalent translation IEC 60873-2.2004 (English version). To comply with GB/T 1.1-2000 "Standardization Guide Part 1. Standard structure and writing rules" and GB/T 20000.2-2001. the relevant provisions of "Standardization Guide Part 2 of the rules of international standards" and ease of use, The development of this section made the following editorial changes. --- "This standard" be replaced by "GB/T 3386 to the present section"; --- Delete foreword international standards; --- Original language reference guide according to the provisions of the standard GB/T 1.1-2000 changed to normative documents referenced introductory phrase; --- Normative references A list of documents according to the provisions of GB/T 1.1-2000 re-arranged; --- 5.1 adds quotation marks to show the sign of the error handling should be consistent with the provisions of GB/T 3386 the first part. This part is proposed by China Machinery Industry Federation. This part of the measurement and control of Standardization Technical Committee first points by the National Technical Committee of industrial processes. This section is responsible for drafting unit. Shanghai Institute of Industrial Automation Instrumentation. Participated in the drafting of this section. Shanghai Automation Instrumentation and Systems Testing, Shanghai Automation Instrumentation Co., Ltd. Recorder Table Manufacturing, Sichuan-Chongqing Plant Co., actuators branches recorders. The main drafters of this section. Chen Shih Well, Li Minghua, Liu Wenxiu, Cheng Guangfu, Jiangmin Jiang. GB/T 3386.2-2007/IEC 60873-2.2004 Industrial process control systems Electric and pneumatic analogue chart recorders Part 2. Inspection and routine testing

1 Scope

This section GB/T 3386 is suitable for use in process control signal standardization work (industrial process control systems) electric and pneumatic Analogue chart recorders, including continuous dashes and RBI recorders and multi-point and multi-pen recorder. Some tests may not apply to all Loggers, and certain types of recorders may require additional testing. This section is intended for the electric and pneumatic analogue chart recorders for inspection and routine tests, such tests provide acceptance tests or after repair Technical support. Full Performance Test or in harsh conditions. recorder (such as temperature) should adopt the use of GB/T 3386.1. As long as there can be Energy, should be GB/T 18271 regulations are tested and personnel must be familiar with the standards. Quantitative criteria for acceptable performance should be negotiated by the manufacturer and user. The test report should indicate those tests done. This section to Seek shall come into force with the approval of the manufacturer and the user's consent.

2 Normative references

The following documents contain provisions which, through reference to GB/T 3386 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 3386.1-2007 industrial process control systems with electric and pneumatic analogue chart recorders - Part 1. Performance Evaluation party Method (IEC 60873-1.2003, IDT) GB/T 18271.3-2000 Process measurement and control devices - General methods and procedures for evaluating performance - Part 3. effects of influence quantities Test (idt IEC 61298-3.1998) IEC 60410. 1973 Sampling procedures and inspection program IEC 61010-1.2001 measurement, control and laboratory use safety requirements for electrical equipment - Part 1. General requirements

3 Terms and Definitions

GB/T 3386.1 and established the following terms and definitions apply GB/T 3386 of this section. 3.1 Used to test user authentication device complies with certain conditions stipulated in the contract requirements.

4 samples tested

If the user and the manufacturer agreed to be tested on a sample batch, it suggested the use of IEC 60410. 1973 Sampling methods proposed. When sampling, selected by the user surveyors were tested recorder.

5 Performance Test

Environmental conditions test site shall be recorded (see GB/T 3386.1-2007 5.1). Adjustment. For the zero, span and damping should be after (as for example, acceptance tests) in the final manufacturing adjustments, or after a user-determined adjustment (Example GB/T 3386.2-2007/IEC 60873-2.2004 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3386.2-2007_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3386.2-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3386.2-2007_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3386.2-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.