GB/T 3386.1-2007 English PDFUS$294.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3386.1-2007: Electrical and pneumatic analogue chart recorders for use in industrial-process control systems -- Part 1: Methods for performance evaluation Status: Valid GB/T 3386.1: Historical versions
Basic dataStandard ID: GB/T 3386.1-2007 (GB/T3386.1-2007)Description (Translated English): Electrical and pneumatic analogue chart recorders for use in industrial-process control systems -- Part 1: Methods for performance evaluation Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N14 Classification of International Standard: 17.220.20 Word Count Estimation: 15,167 Date of Issue: 2007-09-12 Date of Implementation: 2008-05-01 Older Standard (superseded by this standard): GB/T 3386-1988 Adopted Standard: IEC 60873-1-2003, IDT Regulation (derived from): China Announcement of Newly Approved National Standards No. 12 of 2007 (No. 112 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the process control to make sure that all the work of a standardized electric signal and pneumatic analogue chart recorders, including continuous marking and RBI recorder and multi-point and multi- pen recorder performance. Some tests may not apply to all loggers, and certain types of recorders may need additional tests. This section is designed to work in a standardized process control signal with electric and pneumatic analogue chart recorders for evaluating the performance requirements of the harmonized test methods. When the need to press for a comprehensive assessment of this part, you can only carry out the necessary tests. Test results relevant provisions of this section shall be included in the test report requirements. The test report shall clarify the assessment described in the report is not a comprehensive evaluation, and pointed out that the omitted items. GB/T 3386.1-2007: Electrical and pneumatic analogue chart recorders for use in industrial-process control systems -- Part 1: Methods for performance evaluation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Electrical and pneumatic analogue chart recorders for use in industrial-process control systems Part 1. Methods for performance evaluation ICS 17.220.20 N14 National Standards of People's Republic of China GB/T 3386.1-2007/IEC 60873-1.2003 Replacing GB/T 3386-1988 Industrial process control systems Electric and pneumatic analogue chart recorders Part 1. Methods of evaluating performance (IEC 60873-1.2003, IDT) Posted 2007-09-12 2008-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 3386 "industrial process control systems with electric and pneumatic analogue chart recorders" is divided into two parts. --- Part 1. Methods for performance evaluation; --- Part 2. Inspection and routine testing. This section GB/T 13386 Part of, identical with IEC 60873-1.2003 "industrial process control systems with electric and pneumatic Analogue chart recorders - Part 1. Methods for performance evaluation. " This section is equivalent translation IEC 60873-1.2003 (English version). To comply with GB/T 1.1-2000 "Standardization Guide Part 1. Standard structure and writing rules" and GB/T 20000.2-2001 The relevant provisions. "Standardization Guide Part 2 of the rules of international standards" and easy to use, at the time of the enactment of this section to do the following Some editorial changes and corrections of errors between. --- "This standard" be replaced by "GB/T 3386 this part." --- Remove the foreword and introduction of international standards. --- Original language reference guide according to the provisions of the standard GB/T 1.1-2000 changed to normative references introductory phrase file. --- Normative according to the provisions GB/T 1.1-2000 rearrange the list of documents. --- Increased "by the error table and the error curve to determine the" parallel representation in 6.3. According to the provisions of GB/T 18271.2, the "back Difference "is the difference between the test point of each cycle up and down stroke readings, but not on the itinerary of test point average error and the average error lower stroke The difference between the difference, in addition to "repetitive" is the maximum difference between each round trip on the same test points measured, it is not from the error curve (Depicted by error of the mean) determined. --- Remove the 7.4 file relating to the provisions cited numbers, GB/T 18271.3-2000 12.5 as "electrical fast transient burst Immunity "instead of" Power transient overvoltage "test because of its" experimental methods and procedures described "column did not specify test Test methods, and therefore reference IEC 61003-1.2003 in the same "power transient overvoltage" pilot project, in the "Test methods and procedures Order Instructions "supplements the specific test method for a column. --- 8.2 long-term drift of the original references GB/T 18271.3-2000 Chapter 24, but that chapter is "long-term drift," in view of 8.2 The long-term drift stability test, now corrected to reference GB/T 18271.2-2000 7.2 "long-term drift." Table reference File a column heading to change the process accordingly. This Part replaces GB/T 3386-1988 "industrial process measurement and control system records and indicators for the performance of electrical and pneumatic analogue Evaluation Method. " Section compared with GB/T 3386-1988 The main changes are as follows. --- This section need to be used with the GB/T 18271; --- Increasing the terms and definitions; --- 4.4 and GB/T 3386-1988 4.10 as this part also made for convenience, you can adjust the input signal to obtain Ideal output values, test procedures and record the input values, but this section 6.1.3 of GB/T 3386-1988 of 5.3 "error table" are inconsistent, the former with a reference table and the error as a percentage of the output range that the latter error It expressed as a percentage of the input range (as equivalent, this section without modification); --- This part is not listed separately on basic error bars, the error 6.1.3 in this section is referred to GB/T 3386-1988 5.5 The basic error; --- Increased electromagnetic radiation, the amount of purge gas and other effects of the test; --- Smear test in this section with a frequency response conditions, GB/T 3386-1988 using the input signal conditions of long-term record; --- Increase in the content of the test report; GB/T 3386.1-2007/IEC 60873-1.2003 --- Remove the error table instance (can refer to GB/T 18271.2-2000); --- Increased normative appendix "Other matters." This section of Appendix A normative appendix. This part is proposed by China Machinery Industry Federation. This part of the measurement and control of Standardization Technical Committee first points by the National Technical Committee of industrial processes. This section is responsible for drafting unit. Shanghai Institute of Industrial Automation Instrumentation. Participated in the drafting of this section. Shanghai Automation Instrumentation and Systems Testing, Shanghai Automation Instrumentation Co., Ltd. Recorder Table Manufacturing, Sichuan-Chongqing Plant Co., actuators branches recorders. The main drafters of this section. Chen Shih Well, Li Minghua, Liu Wenxiu, Cheng Guangfu, Jiangmin Jiang. This part of the standard replaces the previous editions are. GB/T 3386-1982, GB/T 3386-1988. GB/T 3386.1-2007/IEC 60873-1.2003 Industrial process control systems Electric and pneumatic analogue chart recorders Part 1. Methods of evaluating performance1 ScopeGB/T 3386 provisions of this part of the process to make sure all standardized control signal operating electric and pneumatic analogue chart recorders Instrument, including continuous dashes and RBI recorders and multi-point and multi-pen recorder performance. Some tests may not apply to all Loggers, and certain types of recorders may require additional testing. This section is intended as a signal to the process of standardization work control electric and pneumatic analogue chart recorders for assessing the performance of a predetermined uniform experiment method. When not in accordance with this section for a comprehensive assessment can be carried out only the required tests. Test results should be required to the relevant provisions of this part of the column The test report. The test report should describe the evaluation described in the report is not a comprehensive assessment, and noted that the omitted item.2 Normative referencesThe following documents contain provisions which, through reference to GB/T 3386 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 2900.56-2002 Electrotechnical terminology automatic control (idt IEC 60050-351.1998) GB/T 18271.1-2000 Process measurement and control devices - General methods and procedures for evaluating performance - Part 1. General Then (idt IEC 61298-1.1995) GB/T 18271.2-2000 Process measurement and control devices - General methods and procedures for evaluating performance - Part 2. under reference conditions Test (idt IEC 61298-2.1995) GB/T 18271.3-2000 Process measurement and control devices - General methods and procedures for evaluating performance - Part 3. effects of influence quantities Test (idt IEC 61298-3.1998) Part 4 GB/T 18271.4-2000 Process measurement and control devices - General methods and procedures for evaluating performance. Evaluation report within Yung (idt IEC 61298-4.1995) IEC 61010-1.2001 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements IEC 61187.1993 Electrical and electronic measuring equipment preparation file3 Terms and DefinitionsGB/T 2900.56, GB/T 18271.1, GB/T 18271.2, GB/T 18271.3 and established the following terms and definitions apply In GB/T 3386 to the present section. 3.1 On continuous dash logger, even if the recording sheet moving slowly, the friction means recording on the recording paper may still be on the record result influences. 3.2 GB/T 3386.1-2007/IEC 60873-1.2003 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3386.1-2007_English be delivered?Answer: Upon your order, we will start to translate GB/T 3386.1-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3386.1-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3386.1-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 3386.1-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3386.1-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
