GB/T 33814-2017 PDF EnglishUS$200.00 · In stock · Download in 9 seconds
GB/T 33814-2017: Welded H-section steel Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 33814-2017: Welded H-section steel---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33814-2017GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.140.70 H 44 Welded H-section steel Issued on. MAY 31, 2017 Implemented on. FEBRUARY 01, 2018 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of the People's Republic of China. Table of ContentsForeword... 3 1 Scope... 4 2 Normative references... 4 3 Ordering content... 5 4 Code and specification representation method... 6 5 Dimension, shape, weight and permissible deviation... 6 6 Technical requirements and production... 12 7 Inspection rules... 14 8 Packaging, marking and quality certificate... 19 Annex A (informative) Cross-sectional dimension, cross-sectional area, theoretical weight and cross-sectional characteristic parameters of welded H- section steel... 21ForewordThis Standard is drafted in accordance with the rules given in GB/T 1.1-2009. This Standard was proposed by China Iron and Steel Association. This Standard shall be under the jurisdiction of National Technical Committee on Steel of Standardization Administration of China (SAC/TC 183). Drafting organizations of this Standard. MCC Construction Research Institute Co., Ltd., Anhui Ma Steel Engineering Technology Group Steel Structure Branch, Hebei Jinxi Iron and Steel Group Co., Ltd., China Metallurgical Information and Standardization Institute. Main drafters of this Standard. Ma Dezhi, Liu Jingfeng, Peng Yongli, Wang Yujie, Zhao Yichen, Duan Bin, Zheng Shiqiang, Chen Jie, Liu Baoshi, Zhou Yunfang, Liu Chun. Welded H-section steel1 ScopeThis Standard specifies the ordering content, code and specification representation method, dimension, shape, weight and permissible deviation, technical requirements and production, inspection rules, packaging, marking and quality certificate of welded H-section steel. This Standard applies to the selection, fabrication and acceptance of welded H-section steel.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 228.1 Metallic materials - Tensile testing - Part 1.Method of test at room temperature GB/T 229 Metallic materials - Charpy pendulum impact test method GB/T 232 Metallic materials - Bend test GB/T 699 Quality carbon structure steels GB/T 700 Carbon structural steels GB/T 712 Ship and ocean engineering structural steel GB/T 714 Structural steel for bridge GB/T 1591 High strength low alloy structural steels3 Ordering contentContracts ordered according to this Standard shall contain the following technical contents.4 Code and specification representation method4.1 Code The code of welded H-section steel is WH, where “W” represents welded and “H” represents H-section steel. 4.2 Specification representation The specification of welded H-section steel shall be expressed in the following form.5 Dimension, shape, weight and permissible deviation5.1 Dimension and representation method 5.3 Weight and permissible deviation Welded H-section steel shall be delivered according to the theoretical weight (the theoretical weight shall be calculated regarding the density as 7.85 g/cm3). Agreed upon between he supply and demand parties and specified in the contract, it may delivery according to the actual weight.6 Technical requirements and production6.1 Steel 6.1.1 Steel used for welded H-section steel shall comply with the specifications of relevant standards such as GB/T 699, GB/T 700, GB/T 712, GB/T 714, GB/T 1591, GB/T 3274, GB/T 4171, GB/T 19879. 6.2 Welding materials 6.2.1 The welding material used for welded H-section steel shall comply with the specifications of relevant standards such as GB/T 2537, GB/T 4282, GB/T 5117, GB/T 5118, GB/T 5293, GB/T 8110, GB/T 10045, GB/T 12470, GB/T 17493. 6.3 Welding 6.3.1 When the thickness of the web of welded H-section steel is not greater than 20 mm, the web and the flange plate may be connected by fillet welds. The weld foot size hf shall meet the design requirements. 6.3.2 When the thickness of the web of welded H-section steel is greater than 20 mm, the web and flange plate should be connected by partially or fully welded butt joint and fillet joint combined welds. The weld quality grade shall be determined in accordance with the relevant specifications of GB 50661-2011. 6.3.6 Welding H-section steel can adopt welding methods such as submerged arc automatic welding (boat welding or flat fillet welding), solid welding wire or flux cored wire gas shielded welding, electrode arc welding, flux cored wire self- protective welding and their combinations. The welding method and the welding process shall meet the requirements of relevant standards. 6.4 Welding personnel 6.4.1 Welders engaged in the manufacture of welded H-section steel shall take technical qualification examinations according to the requirements of steel type, welding joint form, welding method, welding position, etc., and obtain the corresponding certificate of conformity. The certified welder shall weld within the recognize range of the certificate of conformity.7 Inspection rules7.1 Inspection and acceptance 7.1.1 The Inspection and acceptance of welded H-section steel finished products shall be organized by the quality supervision department of the production organization. 7.2 Batching rules The inspection batch of welded H-section steel shall be determined according to product specification, raw material and welding process. The same batch of welded H-section steel shall have the same specification, using steel and welding materials of the same grade (model), quality grade, delivery conditions, and using the same processing and welding process; each batch is not more than 300 t. 7.3 Sampling rules 7.3.1 The sampling method for the chemical composition inspection of welded H-section steel shall be in accordance with the relevant specifications of GB/T 20066.The sampling part and sampling method of the mechanical property test shall be in accordance with the relevant specifications of GB/T 2975. 7.3.3 The dimensions, shape and surface quality of welded H-section steel shall be checked one by one. 7.4 Finished product inspection The inspection items, sampling quantity and test methods of welded H-section steel shall comply with the specifications of Table 4. 7.5 Welding inspection 7.5.1 Appearance inspection 7.5.1.1 All welds shall be cooled to ambient temperature for visual inspection. 7.5.1.4 The content and requirements of weld appearance dimension inspection shall comply with the specifications of Table 2 and Table 3. 7.5.2 Non-destructive testing 7.5.2.1 The non-destructive testing shall be carried out after passing the appearance inspection. Specifically, it shall comply with the relevant specifications of GB 50661-2011. 7.5.2.5 Radiation test method may be used to supplement the test as needed. 7.5.2.6 Radiation testing shall comply with the relevant specifications of GB/T 3323-2005.The quality grade of radiography shall comply with the requirements of Grade B. The qualification grade of Grade I welds shall be Grade II and above, and the qualification grade of Grade II welds shall be Grade III and above. 7.5.2.10 Penetration testing shall comply with the relevant specifications of JB/T 6062.The conformity criterion shall comply with the relevant specifications of the appearance inspection in Table 5. 7.6 Testing agencies and personnel 7.6.1 The third-party testing agency engaged in inspection shall pass the national laboratory accreditation or measurement certification and shall have the qualification for testing the corresponding items. 7.7.2 The results of sampling inspection of welds shall be judged according to the following specifications.8 Packaging, marking and quality certificate8.1 Welded H-section steel shall be marked with the name or registered trademark of the manufacturer by means of stamping, spraying or affixing. The marking shall be clear and the marking location shall be at the end of the web. 8.2 Welded H-section steel finished products shall be marked with the factory- exit number, the grade of the steel used and the inspector's symbol or steel letter for examination. 8.3 Each batch of welded H-section steel shall be accompanied by a quality certificate issued by the supply party, which states. 8.4 In addition to the above specifications, the packaging, marking and quality certificate of welded H-section steel shall also comply with the relevant specifications of GB/T 2101. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 33814-2017 be delivered?Answer: The full copy PDF of English version of GB/T 33814-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 33814-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33814-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 33814-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 33814-2017?A step-by-step guide to download PDF of GB/T 33814-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 33814-2017". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
