GB/T 3374.2-2011 English PDFUS$494.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3374.2-2011: Vocabulary of gear terms -- Part 2: Definitions related to worm gear geometry Status: Valid
Basic dataStandard ID: GB/T 3374.2-2011 (GB/T3374.2-2011)Description (Translated English): Vocabulary of gear terms -- Part 2: Definitions related to worm gear geometry Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J17 Classification of International Standard: 21.200 Word Count Estimation: 25,216 Date of Issue: 2011-12-05 Date of Implementation: 2012-06-01 Older Standard (superseded by this standard): GB/T 10086-1988 Adopted Standard: ISO 1122.2-1999, IDT Regulation (derived from): Announcement of Newly Approved National Standards No. 19 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the internationally accepted terminology worm gear geometry and standard definition. GB/T 3374.2-2011: Vocabulary of gear terms -- Part 2: Definitions related to worm gear geometry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Vocabulary of gear terms Part 2. Definitions related to worm gear geometry ICS 21.200 J17 National Standards of People's Republic of China Partially replace GB/T 10086-1988 Gear Terms and Definitions Part 2. worm gear geometry defined Part 2. Definitionsrelatedtowormgeargeometry (ISO 1122-2.1999, IDT) Issued on. 2011-12-05 2012-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 3374 "gear Terms and Definitions" includes the following two parts. --- Part 1. geometry defined; --- Part 2. worm gear geometry definition. This section GB/T 23374 Part of. This part identical with ISO 1122-2.1999 "gear Terms and definitions - Part 2. worm gear geometry definition" (in English). This section is equivalent translation ISO 1122-2.1999. For ease of use, this section made the following editorial changes. --- Increase the "scope" of the chapter number, after the reg number sequence row; --- Remove the foreword and introduction of ISO 1122-2; --- Increased Chinese index. This part is the GB/T 10086-1988 "Cylindrical worm code and the term" part of the term of the amendment. versus GB/T 10086-1988 terms - compared to the main content amended as follows. --- Term part of the individual to become a standard, the standard name to "gear - Terms and definitions - Part 2. worm gear geometry definition"; --- Increased worm content (2.2.1.9); --- Increased worm content (2.1.2.5); --- Increased worm subsidiary content (2.1.2.6,2.4.1.4,2.4.1.5,2.4.1.7,2.4.1.8,2.4.1.9,2.4.1.10,2.4.2.1); --- Remove the gullet, the teeth and the tooth surface normal straight profile worm content; --- Remove the disc-shaped cones, tapered fingers and the end plate cone enveloping cylindrical worm content; --- Remove the ring enveloping torus and axial Circular Cylinder Worm content. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee Gear (SAC/TC52) centralized. This section is responsible for drafting unit. Zhengzhou Machinery Research Institute. The main drafters of this section. Wang Qi, Reallize Zhangyuan Guo, Wang long way, Yang Xing Yuan, Chen love Min, cattle long roots. This part of the standard replaces the previous editions are. --- GB/T 10086-1988 in the terminology section. Gear Terms and Definitions Part 2. worm gear geometry defined1 ScopeGB/T 3374 This section gives the internationally accepted standard worm gear geometry terms and definitions.2 defined definitions2.1 General definition of general 2.1.1 Torus and the line toricsurfacesandlines 2.1.1.1 Torus toroid A circle (generating circle) around the outer circumference of the circle and being located in one axis (the torus axis) rotating in the same plane of rotation generated Body or surface of revolution. see picture 1. figure 1 2.1.1.2 Generating circle generantofatoroid torus Torus is any one of its axis plane cut out two circles any one round. See Figure 2. figure 2 2.1.1.3 Intermediate plane mid-planeofthetoroid torus Torus and a plane of symmetry perpendicular to the axis of the torus. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3374.2-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 3374.2-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3374.2-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3374.2-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
