GB/T 3374.1-2010 English PDFUS$1234.00 ยท In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3374.1-2010: Vocabulary of gear terms -- Part 1: Definitions related to geometry Status: Valid GB/T 3374.1: Historical versions
Basic dataStandard ID: GB/T 3374.1-2010 (GB/T3374.1-2010)Description (Translated English): Vocabulary of gear terms -- Part 1: Definitions related to geometry Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J17 Classification of International Standard: 21.200 Word Count Estimation: 62,635 Date of Issue: 2010-08-09 Date of Implementation: 2010-12-31 Older Standard (superseded by this standard): GB/T 3374-1992 Adopted Standard: ISO 1122-1-1998, IDT Regulation (derived from): National Standard Approval Announcement 2010 No.3 (Total No.158) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the internationally accepted standard gear geometry terms and definitions. GB/T 3374.1-2010: Vocabulary of gear terms -- Part 1: Definitions related to geometry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Vocabulary of gear terms Part 1. Definitions related to geometry ICS 21.200 J17 National Standards of People's Republic of China Partially replace GB/T 3374-1992 Gear Terms and Definitions Part 1. Geometry defined Part 1. Definitionsrelatedtogeometry (ISO 1122-1.1998, IDT) Issued on. 2010-08-09 2010-12-31 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 3374-2010 "gear Terms and Definitions" includes the following two parts. --- Part 1. geometry defined; --- Part 2. worm gear geometry definition. This section GB/T 13374-2010 part of. This part identical with ISO 1122-1.1998 "gear Terms and definitions - Part 1. Geometry definition" (in English). This section is equivalent translation ISO 1122-1.1998. For ease of use, this section made the following editorial changes. --- Increase the "scope" of the chapter number, after the reg number sequence row; --- Remove the foreword and introduction of ISO 1122-1; --- Increased Chinese index. This part is GB/T 3374-1992 part of the amendment. Compared with GB/T 3374-1992, the main contents of the following. --- Standard name changed to "gear - Terms and definitions - Part 1. Geometry definition"; --- Increased bevel gear content (2.4.1.11 and 4.1.7.5); --- Adding gear tool content (3.1.9.5,3.1.9.6,4.1.8.1 and 4.1.8.3); --- Increased gear measurement content (3.1.6.5 and 3.1.6.6); --- Removed Cycloidal content; --- Remove the arc gear content; --- The worm, the worm contents into the GB/T 3374.2 in. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee Gear (SAC/TC52) centralized. This section is responsible for drafting unit. Zhengzhou Machinery Research Institute. The main drafters of this section. Wang Qi, Reallize Zhangyuan Guo, Wang long way, star of the original Yang, Zhang Meng, Chen love Min, cattle long roots. This part of the standard replaces the previous editions are. --- GB/T 3374-1982; --- Partially replace GB/T 3374-1992. Gear Terms and Definitions Part 1. Geometry defined1 ScopeGB/T 3374 This section gives the internationally accepted standard gear geometry terms and definitions.2 General Definitions generaldefinitions2.1 Kinematics defined kinematicdefinitions The relative position of the axis of relativepositionofaxis 2.1.1 2.1.1.1 Gear toothedgear A toothed member, and that the other toothed member conjugate tooth surface sequentially through which, in order to transfer or receive motion. 2.1.1.2 Gears gearpair Means can rotate about its axis in the two gears, relative position of the axis is fixed, by successively contacting the tooth action A gear driven by another gear to rotate. 2.1.1.3 Gear train trainofgears Any combination of a plurality of gear pairs. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3374.1-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 3374.1-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3374.1-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3374.1-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 3374.1-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3374.1-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
