GB/T 33626.1-2017 English PDF

US$174.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33626.1-2017: Pneumatic lubricators -- Part 1: Main characteristics to be included in supplier literature and product-marking requirements
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 33626.1-2017	174	Add to Cart	3 days	Pneumatic lubricators -- Part 1: Main characteristics to be included in supplier literature and product-marking requirements	Valid

Similar standards

GB/T 40565.3   GB/T 40565.4   GB/T 40565.2   GB/T 22107   GB/T 33636   GB/T 33626.2   

Basic data

Standard ID: GB/T 33626.1-2017 (GB/T33626.1-2017)
Description (Translated English): Pneumatic lubricators -- Part 1: Main characteristics to be included in supplier literature and product-marking requirements
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J20
Classification of International Standard: 23.100.99
Word Count Estimation: 9,914
Date of Issue: 2017-05-12
Date of Implementation: 2017-12-01
Quoted Standard: ISO 7-1; ISO 1179-1; ISO 2944; ISO 5598; ISO 6301-2-2006; ISO 16030
Adopted Standard: ISO 6301-1-2009, IDT
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the main characteristics and product identification requirements for pneumatic aerosols contained in business documents. This standard applies to oil fogs with a rated pressure of not more than 1 600 kPa and a maximum operating temperature of 80 �� C made of light alloy (aluminum, etc.), die-cast zinc alloy, brass, steel and plastic.

GB/T 33626.1-2017: Pneumatic lubricators -- Part 1: Main characteristics to be included in supplier literature and product-marking requirements

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pneumatic lubricators - Part 1. Main characteristics to be included in supplier literature and product-marking requirements ICS 23.100.99 J20 National Standards of People's Republic of China Pneumatic oil misters - Part 1. Business documents should be used Contains the key features and product identification requirements Pneumaticlubricators-Part 1. Maincharacteristicstobeincludedin (ISO 6301-1..2009, Pneumaticfluidpower-Compressed-air lubricators-Part 1. Maincharacteristicstobeincludedinsupplier's literatureandproduct-markingrequirements, IDT) 2017-05-12 released 2017-12-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released

Foreword

GB/T 33626 "Pneumatic oil mist" is divided into the following two parts. - Part 1. Main features and product identification requirements to be included in business documents; - Part 2. Test methods for assessing the main features contained in business documents. This part is part 1 of GB/T 33626. This part uses the translation method equivalent to ISO 6301-1..2009 "Pneumatic transmission of compressed air misters Part 1. Business documents Should include the main features and product identification requirements ". In this part of the normative reference to the international documents have a consistent correspondence between the following documents. --- GB/T 2346-2003 Fluid drive systems and components Nominal pressure series (ISO 2944..2000, MOD) --- GB/T 7306.1-2000 55 ° sealed tube thread Part 1. cylindrical internal thread and conical external thread (eqvISO 7-1. 1994) --- GB/T 7306.2-2000 55 ° Sealing tube thread Part 2. Conical internal thread with conical external thread (eqvISO 7-1. 1994) GB/T 14038-2008 Pneumatic connection port and stud (ISO 16030..2001, IDT) GB/T 17446-2012 Fluid Drive Systems and Components Glossary (ISO 5598..2008, IDT) GB/T 33626.2-2017 Pneumatic oil misters - Part 2. Test methods for assessing the main characteristics contained in business documents (ISO 6301-2..2006, MOD) For ease of use, this section has been edited as follows. --- Fixed an error in the international standard, moving the dimension line of h in Figure 1 to the center of the mounting hole. --- Change the standard name to "Pneumatic oil mister Part 1. Main features and product identification requirements that should be included in the business document". This part is made by the China Machinery Industry Federation. This part of the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3) centralized. This part of the drafting unit. Weihai Bo Sheng Pneumatic Hydraulic Co., Ltd., Ningbo Yade off Automation Industry Co., Ltd., the national aerodynamic quality Supervision and Inspection Center, Ningbo Huayi Pneumatic Engineering Co., Ltd., Guangdong Province Zhaoqing Fangda Pneumatic Co., Ltd., Ningbo Sonuo Industrial Automation Co., Ltd., Zhejiang Braun Pneumatic Technology Co., Ltd., Fenghua City Fengtong Automation Industry Co., Ltd. This part of the main drafters. Zhang Zhiqing, Wang Zhaorong, Fang Qinghua, Chen morning Yang, Lu Bo, Liu Li Jiao, Zheng Yan Sen, Jiang Haodi, Chen Dingzhi, Lin Weijiang, Mao Xinqiang, unit silver, Jiang Jiansheng, Jiang Baozhong.

Introduction

In a pneumatic system, the power is transmitted and controlled by the compressed air in the closed loop. The oil mist is the right amount of lubricant added Compressed air flow, the need to lubricate the pneumatic components to lubricate. Pneumatic oil misters - Part 1. Business documents should be used Contains the key features and product identification requirements

1 Scope

This part of GB/T 33626 specifies the key features and product identification requirements for pneumatic aerosols contained in business documents. This part applies to the use of light alloy (aluminum, etc.), die-casting zinc alloy, brass, steel and plastic manufacturing rated pressure of not more than 1600kPa and The maximum working temperature of 80 ℃ oil mist.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. ISO 7-1 pressure-tightened pipe threads - Part 1. Dimensions, tolerances and nomenclature (Pipethreadswherepressure- tightjointsaremadeonthethreads-Part 1. Dimensions, tolerancesanddesignation) ISO 1179-1 Connection for general purpose and fluid transmission ISO 228-1 (unsealed pipe thread) Thread and rubber or metal to metal Sealed oil (gas) and stud ends Part 1. Threaded (Connectionsforgeneraluseandfluidpower-Portsand studendswithIS.2008-1threadswithelastomericormetal-to-metalsealing-Part 1. Threadedports) ISO 2944 fluid drive systems and components nominal pressure (Fluidpowersystemsandcomponents-Nominal pressure ISO 5598 fluid drive system and component vocabulary (Fluidpowersystemsandcomponents-Vocabulary) ISO 6201-2..2006 Pneumatic drives - Compressed air misters - Part 2. Assessment of main features contained in business documents Test method (Pneumaticfluidpower-Compressed-airlubricators-Part 2. Testmethodstodetermine themaincharacteristicstobeincludedinsupplier'sliterature) ISO 16030 Pneumaticfluidpower-Connections-Portsand (Pneumaticfluidpower-Connections-Portsand studends

3 terms and definitions

ISO 5598 and the following terms and definitions apply to this document. 3.1 Pneumatic oil mist An element designed to add an appropriate amount of lubricant to the compressed air stream. Note 1. There are two types of oil mist, as defined in 3.1.1 and 3.1.2, depending on the principle of operation. Note 2. Renovation ISO 5598..2008, definition 3.2.117. 3.1.1 Non-recirculating fluid mist And lubricating the lubricating oil passing through the oiling means all into the lubricating means in the air flow. Note. rewrite ISO 5598..2008, define 3.2.467. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 33626.1-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 33626.1-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 33626.1-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 33626.1-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.