GB/T 3359-2009 English PDFUS$814.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3359-2009: Statistical interpretation of data -- Determination of statistical tolerance intervals Status: Valid GB/T 3359: Historical versions
Basic dataStandard ID: GB/T 3359-2009 (GB/T3359-2009)Description (Translated English): Statistical interpretation of data -- Determination of statistical tolerance intervals Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A41 Classification of International Standard: 03.120.30 Word Count Estimation: 41,498 Date of Issue: 2009-10-15 Date of Implementation: 2009-12-01 Older Standard (superseded by this standard): GB/T 3359-1982 Quoted Standard: GB/T 3358.1; GB/T 3358.2 Adopted Standard: ISO 16269-6-2005, IDT Regulation (derived from): Announcement of Newly Approved National Standards No. 11 of 2009 (No. 151 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the procedures to establish tolerance intervals, the tolerance interval to contain at least a certain level of confidence in the overall proportion of parts required. This standard takes into account unilateral and bilateral statistical tolerance interval determination, given there are two ways to determine which parameters studied law applies to the case of normal distribution characteristics, distribution free method is applicable to only know the distribution continuous case. GB/T 3359-2009: Statistical interpretation of data -- Determination of statistical tolerance intervals---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Statistical interpretation of data. Determination of statistical tolerance intervals ICS 03.120.30 A41 National Standards of People's Republic of China GB/T 3359-2009/ISO 16269-6.2005 Replacing GB/T 3359-1982 Statistical processing and interpretation of data Statistical tolerance interval determined (ISO 16269-6.2005, Statisticalinterpretationofdata- Part 6. Determinationofstatisticaltoleranceintervals, IDT) Posted 2009-10-15 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms, definitions and symbols 1 3.1 Terms and definitions 3.2 Symbols 1 4 Program 2 4.1 normal population mean and variance are aware of the situation 2 4.2 Normal Population Means known unknown variance case 2 4.3 normal population mean and variance are unknown Scenario 2 4.4 Any case type is unknown continuous distribution of 2 5 Example 3 5.1 Data 3 5.2 Example 1. The variance known when the one-sided statistical tolerance interval 3 5.3 Example 2. The variance known when the two-sided statistical tolerance interval 3 5.4 Example 3. Unknown Variance sided statistical tolerance interval 3 5.5 Example 4. Unknown Variance sided statistical tolerance interval 4 5.6 Example 5. Distribution of free continuous distribution of statistical tolerance intervals 4 Appendix A (informative) tolerance intervals Table 6 Annex F (normative) free distribution of one-sided tolerance intervals 33 Annex G (normative) distributed free sided tolerance intervals 34 Free distribution Appendix H (informative) distribution of any type of statistical tolerance interval configuration 35 Calculation Appendix I (informative) Statistical parametric method sided tolerance intervals coefficient of 36 References 37 GB/T 3359-2009/ISO 16269-6.2005Foreword"Data processing and interpretation of the statistics" includes the following national standards. Statistical processing and interpretation --- GB/T 3359 statistical data to determine the tolerance interval Statistical interpretation of comparison in the case of two paired observations mean --- GB/T 3361 data Statistical interpretation of Binomial Distribution Reliability sided lower confidence limit --- GB/T 4087 data --- Statistical processing and interpretation binomial distribution parameters GB/T 4088 Estimation and Test Data --- Statistical processing and interpretation of the Poisson distribution parameters GB/T 4089 Estimation and test data --- GB/T 4882 Statistical interpretation of data normality test --- Analyzing and processing GB /statistical processing and interpretation of normal sample outliers T 4883 data --- GB/T 4885 Normal distribution complete reliability lower confidence limit --- GB /statistical processing and interpretation of the mean and variance of normal distribution of data T 4889 Estimation and Testing --- GB Statistical interpretation of normal distribution mean and variance test the efficacy/T 4890 data --- GB /Statistical interpretation Γ distribution (Pearson Ⅲ distribution) parameters T 8055 data estimates --- GB /statistical processing and interpretation of data distribution index T 8056 judgment and sample handling outliers Analyzing and Processing --- GB /statistical processing and interpretation of Type Ⅰ extreme value distribution of the sample outliers T 6380 data --- GB /statistical processing and interpretation of test results of multiple comparisons of data T 10092 --- GB/T 10094 quantile normal confidence limits and coefficient of variation This standard is identical with ISO 16269-6.2005 "Statistical processing and interpretation of data - Part 6. statistical tolerance interval is determined." For ease of use, this standard made the following editorial changes. --- Remove the foreword and introduction of international standards; --- With a decimal point "." Instead of a comma as the decimal point "." This standard replaces GB/T 3359-1982 "statistical processing and interpretation of statistical data to determine the tolerance interval." This standard compared with GB/T 3359-1982 The main changes are as follows. --- The GB/T 3359-1982 the intensity variation coefficient C vp R to CR; --- The GB/T 3359-1982 stress the coefficient of variation C vp S to CS; --- The GB/T 3359-1982 the value of strength FKR to FR, αR; stress standard values to do the appropriate changes; Features sub-sites; --- Added a few comments, which can eliminate some questions. The Standard Appendix B, Appendix C, Appendix D, Appendix E, Appendix F and Appendix G are normative appendices, Appendix A, Appendix H and Appendix I Informative appendices. Application of this standard by the National Standardization Technical Committee on statistical methods (SAC/TC21) and focal points. This standard drafting units. China National Institute of Standardization, Beijing Institute of Technology, Beijing University. The main drafters of this standard. TRANSACTIONS OF ZHAO Shu Ran, Yin Yuliang, Xie law, in Zhen Fan, Room Zhong Xiang, Ding Wenxing. This standard replaces the standards previously issued as follows. --- GB/T 3359-1982. GB/T 3359-2009/ISO 16269-6.2005 Statistical processing and interpretation of data Statistical tolerance interval determined1 ScopeThis standard gives the tolerance interval established procedures, which tolerate a certain level of confidence interval contains at least a predetermined percentage of the overall unit Minute. This standard considers the unilateral and bilateral statistical tolerance interval is determined, there are two methods of determining given, where the parameters of the law applicable to research Case study of the characteristics of normal distribution, free distribution method is applicable to only know the distribution is continuous scenario.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 3358.1 Statistics Vocabulary and symbols - Part 1. General statistical terms and terms (GB/T 3358.1- for Probability 2009, ISO 3534-1.2006, IDT) GB/T 3358.2 Statistics Vocabulary and symbols - Part 2. Applied Statistics (GB/T 3358.2-2009, ISO 3534-2.2006, IDT) 3 Terms, definitions and symbols 3.1 Terms and Definitions GB/T 3358.1 and GB/T 3358.2 and established the following terms and definitions apply to this standard. 3.1.1 Determined by the random sample, comprising at least a predetermined probability sampling interval specified rate overall. Note. When so established the interval confidence level is repeatedly used which contains at least a predetermined percentage of the overall sampling frequency. 3.1.2 Statistics indicate statistical tolerance interval endpoint. Note. The statistical tolerance intervals can be unilateral or bilateral. Unilateral interval only one upper or lower tolerance limits. Bilateral upper and lower tolerance limits are interval. 3.1.3 The overall fall in the proportion of unit statistical tolerance interval. NOTE. This is not the concept of reference [5] The cover factor confused. 3.1.4 Normally distributed population. 3.2 Symbol The following symbols apply to this standard. GB/T 3359-2009/ISO 16269-6.2005 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3359-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 3359-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3359-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3359-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 3359-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3359-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
