GB/T 3358.2-2009 English PDFUS$1614.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3358.2-2009: Statistics -- Vocabulary and symbols -- Part 2: Applied statistics Status: Valid GB/T 3358.2: Historical versions
Basic dataStandard ID: GB/T 3358.2-2009 (GB/T3358.2-2009)Description (Translated English): Statistics -- Vocabulary and symbols -- Part 2: Applied statistics Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A41 Classification of International Standard: 03.120.30 Word Count Estimation: 81,851 Date of Issue: 2009-10-15 Date of Implementation: 2010-02-01 Older Standard (superseded by this standard): GB/T 3358.2-1993 Adopted Standard: ISO 3534-2-2006, IDT Regulation (derived from): Announcement of Newly Approved National Standards No. 11 of 2009 (No. 151 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the application of statistical terminology. And use the term with the ISO norms consistent practice the concept of representation. Glossary entries are arranged by topic. This section provides terminology standard symbols and abbreviations. Also available in Chinese and English indexes. GB/T 3358.2-2009: Statistics -- Vocabulary and symbols -- Part 2: Applied statistics---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Statistics.Vocabulary and symbols.Part 2. Applied statistics ICS 03.120.30 A41 National Standards of People's Republic of China GB/T 3358.2-2009/ISO 3534-2.2006 Replacing GB/T 3358.2-1993 Statistics Vocabulary and symbols Part 2. Applied Statistics (ISO 3534-2.2006, IDT) Posted 2009-10-15 2010-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ Range 1 1 data generation and collection 1 1.1 Characteristics Reference System 1 1.2 Data Source 2 1.3 Sampling Type 6 2 Statistical Process Management 8 Basic concepts related to process 8 2.1 Concepts about 2.2 Variation 9 2.3 Control 11 2.4 Control Chart constitute 14 2.5 Basic terms related to process performance and process capability of 15 2.6 Process Performance < measurement data> 18 2.7 Process Capability < measurement data> 19 3 norms, values and test results 21 3.1 The concept of specification 21 3.2 Characteristics and determination of the amount 23 Related features 3.3 Test and measurement methods 24 3.4 Characteristics of test and measurement results of 26 3.5 The detection capability 27 4 Inspection and acceptance sampling 28 4.1 Inspection Type 28 Type 30 4.2 Acceptance sampling 4.3 Acceptance sampling system 31 4.4 Acceptance criteria 32 4.5 operating characteristic curve (OC curve) Type 34 4.6 Terms relating to the operational characteristics of the 34 4.7 average outgoing quality and quantity inspection 36 5 bulk sampling 37 Concepts related to bulk materials 37 5.1 5.2 Terms relating to bulk sampling 38 5.3 Bulk Sample Preparation 39 5.4 The term of the procedure 40 Appendix A (normative) Symbols and Abbreviations 41 Methods Appendix B (Informative Appendix) to define the terms used in the standard 44 References 60 Index 62 Pinyin index 62 English equivalents index 67 GB/T 3358.2-2009/ISO 3534-2.2006ForewordGB/T 3358 "was words and symbols" is divided into the following sections. --- Part 1. General statistical terms and terms used in probability --- Part 2. Applied Statistics --- Part 3. Experimental Design This section GB/T 23358 Part of, identical with ISO 3534-2.2006 "Statistics Vocabulary and symbols - Part 2. Applied Statistics". And ISO 3534-2.2006 as compared to revised the original error, corrected the original concept of representation is not accurate enough part of the main To change the following. --- The definition of 1.2.20 "paired samples (duplicatesample)" was changed to "by the same sub-sampling method or sample reduction methods, Two samples or sub-samples were given at the same time every "and add a note; --- The 1.3.11 "multistage cluster sampling (multi-stagesampling)" to the definition of the "last stage sampling using cluster sampling Multistage sampling "; --- The 1.3.12 "systematic sampling (systematicsampling)" to the definition of "the population of sampling units arranged in a certain order, Within a predetermined range of a randomly selected set of initial or a unit, then the other samples to determine the sampling unit "according to certain rules; --- 2.3.8 defines "Figure Ba (Ba chart)" was changed to "a certain amount of the sample with a specific type of number of rejects, evaluation and monitoring process Level count control chart "and revised the note; --- 2.3.9 defines "Fig u (u chartcontrolchar)" was changed to "failed with the average sample of a particular type, the assessment And monitoring the level of process control charts count "and revised the note; --- "Total failure rate (totalfractionnonconforming)" the note added that the relevant terms in 2.5.6 "unqualified Product rate, "" percent nonconforming, "" per hundred units unqualified numbers "and the corresponding definitions; --- 2.5.7 ~ 2.5.9 corrects errors on the interval represented; --- Increased 1.3.5 and 1.3.8 of the note; modify 1.3.10 Note 1; deleted 1.2.31 of the original note; --- Deleted Figure B. 23 "reception/non-reception probability is 0.5" entry. For ease of use, this section made the following editorial changes. --- Deleted the ISO foreword; --- Increased 1.2.17 Note 2. "sample can refer to specific items constituting the sampling units, bulk materials, services, but also refers to the pump A feature-like unit (or units of product/individual) value. When defining the meaning of the former, samples of each sampling unit (or Unit of product/individual) also known as' samples' '; --- Of brevity, in a few terms, the use of parentheses indicates which part can be omitted. For example. 4.2 on acceptance sampling The term, which "acceptance" of the term, many are added in brackets indicates the word "acceptance" can be omitted. This Part replaces GB/T 3358.2-1993 "the second part of statistical quality control statistical term term." And GB/T 3358.2- Compared to 1993, the main changes are as follows. --- Name to "statistically Vocabulary and symbols - Part 2. Applied Statistics"; --- Terminology entries made big adjustment. GB/T 3358.1-1993 in Chapter 4, "a generic term observations and test results." And section 5, "general term sampling methods" in content to GB/T 3358 this part; the bulk sample entries dedicated A chapter; --- Adds a number of examples and comments; --- Adds a conceptual diagram method and terms defined standard terminology used (Appendix B). Appendix A of this section is normative appendix, Appendix B is an informative annex. GB/T 3358.2-2009/ISO 3534-2.2006 This part of the application by the National Standardization Technical Committee on statistical methods and focal points. This part mainly drafted by. Academy of Mathematics and Systems Science, Chinese Institute of Standardization, People's Liberation Army Mechanical Engineering, Suzhou University, Tsinghua University, East China Normal University and National Bureau of Statistics. The main drafters of this section. Feng Shi Yong, Chen Min, Ding Wenxing, Wangren Guan, Zhang Yuzhu, YU Zhen Fan, Sun Jing, Pu Xiaolong, Zhang Yong. This section was first released in 1993, this is the first revision. GB/T 3358.2-2009/ISO 3534-2.2006 Statistics Vocabulary and symbols Part 2. Applied Statistics range GB/T 3358 This section defines the application of statistical terms, with terms consistent with the ISO norm practice concepts statements. Art Language entries are arranged by topic. This section provides the terms of standard symbols and abbreviations, and also provides an index in English. As we all know, due to the complexity and confusion of terms, definitions, symbols and abbreviations used in the name of unity and not caused by, it should have been prevented Statistical applications as a means of improving the efficiency and effectiveness of the organization. The main purpose of this section is twofold. the specific aim is to establish a common vocabulary for all statistical methods in the use of standards; A further object is to strengthen the application of statistical accuracy in use, clarity and consistency. To enable readers to more easily understand their potential Content, specifically the level of mathematics in this section is maintained at a relatively low level. GB/T 3358.1 and GB/T 3358.2 are compatible. However, due to GB/T 3358.1 is on the basis of probability and statistics in surgery Language, it is necessary to use a slightly strict and complex than GB/T 3358.2 expressed in mathematical language. Users of this section may sometimes be Now GB/T 3358.1 certain terms, GB/T 3358.1 relevant terms of the wealth of comments and examples provided through the official terminology Vulgar explanation.1 data generation and collection1.1 Characteristics Reference System 1.1.1 Distinguishable features. Note 1. The characteristic can be inherent or imparted. Note 2. The feature can be qualitative or quantitative. Note 3. There are various types of properties, such as. --- Physical (eg., the electrical characteristics of available chemical mechanical biology); --- Senses (such as. smell, touch, taste, sight, hearing); --- Behavior (such as. courtesy, honesty, integrity); --- Time (eg. punctuality, reliability, availability); --- Ergonomics (eg. physiological characteristics related to personal safety or property); --- Functions (such as. the maximum speed of the aircraft). [GB/T 19000-2008] 1.1.2 Product (1.2.32), process (2.1.1) or system (system) requirements related to the inherent characteristics (1.1.1). Note 1. The "inherent" means something in something or have been there, especially as a permanent characteristic. Note 2. give the product, process or system characteristics (such as. price, product owner) is not a quality characteristic. [GB/T 19000-2008] 1.1.3 About characteristics (1.1.1) the reference value system. Note 1. The term "value" in a broad sense, including qualitative information. Note 2. In a qualitative sense, scaling can be set during a more or less distinct relationship symbols. GB/T 3358.2-2009/ISO 3534-2.2006 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3358.2-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 3358.2-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3358.2-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3358.2-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 3358.2-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3358.2-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
