GB/T 33520-2017 English PDF

US$109.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33520-2017: Drive shaft T-section tooth
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 33520-2017	109	Add to Cart	3 days	Drive shaft T-section tooth	Valid

Similar standards

GB/T 5015   GB/T 5014   GB/T 30819   GB/T 33516   GB/T 33515   

Basic data

Standard ID: GB/T 33520-2017 (GB/T33520-2017)
Description (Translated English): Drive shaft T-section tooth
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J19
Classification of International Standard: 21.120.20
Word Count Estimation: 5,549
Date of Issue: 2017-02-28
Date of Implementation: 2017-06-01
Adopted Standard: ISO 12667-1993, MOD
Regulation (derived from): National Standard Announcement No. 4 of 2017
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the type and size of the T-shaped end teeth of the drive shaft. This standard applies to the shaft parts of the drive shaft.

GB/T 33520-2017: Drive shaft T-section tooth

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Drive shaft T-section tooth ICS 21.120.20 J19 National Standards of People's Republic of China Drive shaft T-shaped face teeth (ISO 12667..1993, Commercialvehiclesandbuses- Cross-toothpropelershaftflanges, typeT, MOD) 2017-02-28 released 2017-06-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the re-drafting method to modify the use of ISO 12667..1993 "commercial vehicle and passenger straight drive shaft T-shaped flange fork". The technical differences between this standard and ISO 12667..1993 are as follows. - according to the parts industry on the use of T-shaped face teeth, the scope of expansion for the shaft with the shaft components; - According to industry conditions and related standards consistency, the removal of the international standard in the normative reference documents; --- According to the industry situation, modified the way mark. This standard is proposed by the National Standard Committee on Machine Shaft and Accessories (SAC/TC109). The drafting unit. Xuchang Far East Drive Shaft Co., Ltd., China Machine Productivity Promotion Center, Nanjing Super Spring Transmission Machinery Co., Ltd. Division, Zhejiang Taishun of the metallurgical machinery parts factory. The main drafters of this standard. Ma Xiling, Ming Cuixin, Chen Yunsheng, Zhou Jianxi, Zhao Chaochun, Xia Zhaokong, Zhu Yue. Drive shaft T-shaped face teeth

1 Scope

This standard specifies the type and size of the T-shaped end teeth of the drive shaft. This standard applies to the shaft parts of the drive shaft.

2 size and tolerance

The dimensions and tolerances of the T-shaped face teeth of the drive shaft are shown in Table 1, Figure 1 and Figure 2. Table 1 units are in millimeters Serial number size d1 0-2 d2 d3 d5 0.2 0 La 0.5-0.5 D x Tb 1 120c 100 82 11 14 70 × 22 2 150c 130 102 13 16 96 × 24d 3 165 140 112 13 16 96 × 26 4 180 150 112 15 18 96 × 26 5.200 165 132 15 22 116 × 28 a Due to special use, other size requirements may be made in the agreement between supply and demand. b Verify that the pit L is the minimum clearance required to adjust the elements of the adjacent drive face teeth. c for a certain purpose, may be required in the supply and demand agreement d1 = 122mm and 155mm. d The current size of the current pit is 92 × 22. The new design of the drive shaft flange should not exceed that size. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 33520-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 33520-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 33520-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 33520-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.