Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 33432-2016 PDF English

US$150.00 · In stock · Download in 9 seconds
GB/T 33432-2016: Basic requirements for wires and connectors of ATVs
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 33432-2016150 Add to Cart Auto, 9 seconds. Basic requirements for wires and connectors of ATVs Valid

Similar standards

GB/T 32960.4   GB/T 32960.3   GB/T 32960.3   GB/T 37133   

GB/T 33432-2016: Basic requirements for wires and connectors of ATVs

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33432-2016
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.040.10 T 35 Basic requirements for wires and connectors of ATVs Issued on: DECEMBER 30, 2016 Implemented on: JULY 01, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the PRC; Standardization Administration of the PRC.

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Terms and definitions ... 4 4 Technical requirements ... 5 5 Test methods ... 7 Basic requirements for wires and connectors of ATVs

1 Scope

This Standard specifies the basic safety requirements and test methods for wires of ATVs. This Standard applies to wires used in ATVs.

2 Normative references

The following documents are indispensable for the application of this document. For the dated references, only the editions with the dates indicated are applicable to this document. For the undated references, the latest edition (including all the amendments) are applicable to this document. QC/T 413-2002 Basic Technical Requirements for Automotive Electric Equipment QC/T 417.1 Road Vehicles - Connections for On-board Electrical Wiring Harnesses - Part 1. Definitions, Test Methods and General Performance Requirements

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Wires Conductor, terminal, and connector assemblies for connecting electric parts of ATVs. The wires include main, branch, embranchment point, juncture, terminal, etc. 3.2 Main The portion of the wires in which two or more conductors are bundled together. 3.3 Branch The portion of the wires in which the end of conductor is not wrapped or a single conductor. 4.7 Insulation withstand voltage performance Non-interconnected conductor terminals can withstand the test of a 50 Hz, 550 V sinusoidal waveform voltage for 1 min. The insulation shall not be broken down. 4.8 Water immersion test The wires, after the water immersion test, shall meet the requirements of 4.5. 4.9 Temperature variation test The wires, after the temperature variation test, shall meet the requirements of 4.5. 4.10 Vibration test After the wires are subjected to the vibration test, the insulation wrapping shall not be loose. The requirements of 4.3, 4.4, and 4.5 shall be met. 4.11 Salt spray test The wires, after the salt spray test, shall meet the requirements of 4.5. 4.12 Solvent test The wires, after the solvent test, shall meet the requirements of 4.5. 4.13 Flame-retardant property The burning flame of wires’ insulating material shall be extinguished within 70 s.

5 Test methods

5.1 Test environmental conditions The test environmental conditions are as follows. - Test temperature 18 °C~28 °C; - Relative humidity 45%~75%; - Atmospheric pressure 86 kPa~106 kPa. 5.2 Wires appearance, conductor color and diameter USE visual inspection and Vernier caliper inspection. It shall meet the requirements of 4.1~4.4. 5.3 Test of tensile strength of terminal The sample to be tested shall be sampled on the actual product. The length of the sample piece shall guarantee the minimum length fixed to the tensile testing machine. The range of tensile testing machine shall be determined according to the need. The indication error shall be no more than ±1%. The fixture for the sample piece shall be moved at a uniform speed. The moving speed of the fixture is a constant value in the range of 25 mm/min~120 mm/min. For the tensile test of the connection between the conductor and the terminal and of the juncture, along the axis of the conductor, the tensile force shall be applied. 5.4 Insulation withstand voltage test It shall be carried out in accordance with the requirements of 4.8 of QC/T 413- 2002. 5.5 Water immersion test The wires are completely immersed in water for 1 h and then taken out. It is allowed to wipe dry the water stain on the surface of wires. Then the test of 4.5 is repeated. 5.6 Temperature variation test It shall be carried out in accordance with the method specified in 4.10 of QC/T 413-2002. 5.7 Vibration test It shall be carried out in accordance with the method specified in 4.12 of QC/T 413-2002. 5.8 Salt spray test It shall be carried out in accordance with the method specified in 4.13 of QC/T 413-2002. 5.9 Solvent test 3 or more solvents such as brake fluid, antifreeze, engine oil, gasoline, and glass cleaner are mixed in equal proportions. After immersing the wires in the above liquid for 20 h, the wires are taken out from the liquid. The surface is wiped; and exposed to air for 30 min. Then the test of 4.5 is repeated. 5.10 Flame-retardant property ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 33432-2016 be delivered?Answer: The full copy PDF of English version of GB/T 33432-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 33432-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33432-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 33432-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 33432-2016?

A step-by-step guide to download PDF of GB/T 33432-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 33432-2016".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9