GB/T 33425-2016 English PDFUS$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 33425-2016: Evaluation method of anti-caking capacity of anti-caking agent for chemical product Status: Valid
Basic dataStandard ID: GB/T 33425-2016 (GB/T33425-2016)Description (Translated English): Evaluation method of anti-caking capacity of anti-caking agent for chemical product Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G10 Classification of International Standard: 71.060.01 Word Count Estimation: 10,135 Date of Issue: 2016-12-30 Date of Implementation: 2017-07-01 Regulation (derived from): National Standard Notice No.27 of 2016 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 33425-2016: Evaluation method of anti-caking capacity of anti-caking agent for chemical product---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Evaluation method of anti-caking capacity of anti-caking agent for chemical product ICS 71.060.01 G10 National Standards of People's Republic of China Chemical products in the anti-caking agent Evaluation method of anti - caking performance 2016-12-30 release 2017-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by the China Petroleum and Chemical Industry Association. This standard is under the jurisdiction of the National Chemical Standardization Technical Committee (SAC/TC63). The drafting of this standard. Fujian Daan Energy Industry Co., Ltd., CNOOC Tianjin Chemical Research and Design Institute, the national inorganic salt products Quality Supervision and Inspection Center. The main drafters of this standard. Liu Zhenmao, Wang Yan, Wang Yan, Shi Liu Yan. Chemical products in the anti-caking agent Evaluation method of anti - caking performance1 ScopeThis standard specifies the anti-caking agent anti-caking performance evaluation methods in chemical products, including moisture absorption, angle of repose, anti-caking rate and cone Determination of the degree of entry. This standard is applicable to the evaluation of anti-caking properties of anti-caking agents in chemical products.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 6005 Test Screen Basic dimensions of wire mesh, perforated plate and electroformed sheet sieve Analysis of laboratory water specifications and test methods GB/T 6682-2008 GB/T 11986 Measurement of surfactant powder and particle angle of repose3 analysis method3.1 General provisions The reagents and water used in this standard, when not specified in other requirements, refer to the analysis of pure reagents and GB/T 6682-2008 in the provisions of the three Water level. 3.2 Determination of moisture absorption rate 3.2.1 Method Overview After the sample is pre-mixed with the anti-caking agent, it is set at a set temperature and humidity for a certain period of time, and the moisture absorption rate is determined by the change in mass The anti - caking properties of anti - caking agents were evaluated. 3.2.2 Reagent Saturated salt solution (30 ° C). Prepare saturated salt solutions with balanced relative humidity values in Table 1. Table 1 Saturated salt solution (30 ° C) corresponds to the standard equilibrium relative humidity value Saturated solution solute standard equilibrium relative humidity value /% Sodium chloride 75.1 ± 0.2 Potassium chloride 83.6 ± 0.3 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33425-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 33425-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 33425-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33425-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
