GB/T 33376-2016 English PDF

US$839.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33376-2016: Terms and definitions for optical functional films
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 33376-2016	839	Add to Cart	5 days	Terms and definitions for optical functional films	Valid

Similar standards

GB/T 37382   GB/T 6324.6   GB/T 7531   GB/T 25273   GB/T 44551   

Basic data

Standard ID: GB/T 33376-2016 (GB/T33376-2016)
Description (Translated English): Terms and definitions for optical functional films
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G15
Classification of International Standard: 71.080.99
Word Count Estimation: 42,463
Date of Issue: 2016-12-30
Date of Implementation: 2017-04-01
Regulation (derived from): National Standard Notice No.27 of 2016
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 33376-2016: Terms and definitions for optical functional films

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Terms and definitions for optical functional films ICS 71.080.99 G15 National Standards of People's Republic of China Terms and Definitions of Optical Functional Films 2016-12-30 release 2017-04-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by the China Petroleum and Chemical Industry Association. This standard by the National Optical Functional Film Materials Standardization Technical Committee (SAC/TC431) centralized. The drafting of this standard unit. Hefei Lucky Technology Industry Co., Ltd., China Lucky Group Co., Ltd. The main drafters of this standard. Xu Lili, Hou Jingbin, Yang Yongkuan, Gao Qing, Xue Jing, Liu Yulei, Wang Zengmin, Li Chao, Zhou Shoufa, Li Caicui, Bao Shi Ping. Terms and Definitions of Optical Functional Films

1 Scope

This standard specifies the terms used in the optical functional film industry and its definition. This standard applies to optical functional films.

2 terms and definitions

2.1 Material parts 2.1.1 Whiteboard whitestandards Used to calibrate the instrument, divided into working standard whiteboard and reference whiteboard. 2.1.2 Protective film A broad concept, all kinds of protective film products not only cited in the finished product protection, in the finished product manufacturing process, can also be used Waste, temporary protection of the media. 2.1.3 Backlight module backlightmodule; BLM One of the key components of the LCD panel, the supply of sufficient brightness and uniform distribution of the light source, so that it can display the image. 2.1.4 Sticky sticks An adhesive that is glued to or prepared to adhere to another object. 2.1.5 Film With the length and width compared to the thickness of a small, free to limit the maximum thickness of the thin and flat products, usually in volume form. 2.1.6 Residual adhesive spline teststripsforsubsequentadhesion After the test strip is adjusted by the state, the test pressure-sensitive adhesive tape is completely separated from the release film and is not supported by special treatment The body is applied to the 180 ° peel test. 2.1.7 Laminate (noun) laminate (noun) A product in which two or more layers of material, or a plurality of materials, are bonded together. 2.1.8 Catalyst Can accelerate the rate of chemical reaction, and the reaction after the end of the theory to maintain the chemical composition of less material. 2.1.9 Lip dielip Thin film extrusion die in the important part of the fluid material along the width of the die width evenly distributed by the mold lip extrusion molding. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 33376-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 33376-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 33376-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 33376-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.