GB/T 33361-2016 English PDF

US$119.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33361-2016: Desulphurization injection lance of hot metal
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 33361-2016	119	Add to Cart	2 days	Desulphurization injection lance of hot metal	Valid

Similar standards

GB/T 5195.1   GB/T 5195.12   GB/T 3286.8   GB/T 32551   GB/T 32549   

Basic data

Standard ID: GB/T 33361-2016 (GB/T33361-2016)
Description (Translated English): Desulphurization injection lance of hot metal
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: D52
Classification of International Standard: 73.080
Word Count Estimation: 6,611
Date of Issue: 2016-12-30
Date of Implementation: 2017-09-01
Regulation (derived from): National Standard Notice No.27 of 2016
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 33361-2016: Desulphurization injection lance of hot metal

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Desulphurization injection lance of hot metal ICS 73.080 D52 National Standards of People's Republic of China Hot metal desulfurization spray gun 2016-12-30 release 2017-09-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by China Iron and Steel Industry Association. This standard is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183). The drafting unit. Yingkou Dongbang Metallurgical Equipment Refractories Co., Ltd., Metallurgical Industry Information Standards Institute. The main drafters of this standard. Yu Linhui, Chen Xingyao, Liu Dongye, Chen Shucun, Guo Yuanyi, Fan Qingdong, Shao Junning, Wu Shaojun, Yang Da, Lu Chunsheng.

Introduction

The issuer of this document drew attention to the fact that the statement of this document may relate to the 5.3 part of Chapter 5 with the relevant patent use. The issuer of this document has no position on the authenticity, validity and scope of the patent. The holder of the document has assured the issuing authority of this document that he is willing to cooperate with any applicant under reasonable and non-discriminatory terms and conditions, Negotiate on patent licensing. The statement of the patent holder has been filed with the issuing authority of this document. Related information can be passed below Way to get. Name of the patent holder. Yingkou Dongbang Metallurgical Equipment Refractories Co., Ltd. Address. Liaoning Province Yingkou Dashiqiao Development Zone. Please note that in addition to the above patents, some of the contents of this document may still involve patents. The issuer of this document does not undertake to identify these specialties Lee's responsibility. Hot metal desulfurization spray gun

1 Scope

This standard specifies the terms and definitions of hot metal desulphurization spray guns, grades, technical requirements, test methods, inspection rules, packaging, marking, transportation, Storage and quality certificate. This standard applies to the hot metal pretreatment desulfurization spray gun (hereinafter referred to as gun), hot metal dephosphorization, desilicon pretreatment and other spray gun can refer to this standard.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. Test method for flexural strength of refractory at room temperature GB/T 3001 Test method for compressive strength of refractory materials at room temperature GB/T GB/T 5988 Test method for variation of refractory heating permanent lines GB/T 6900 Chemical analysis method for aluminum - silicon refractories Test method for refractoriness of refractory materials GB/T 7322 GB/T 10326 - Determination of dimensions, appearance and cross - section of refractory products GB/T 21114 Refractory X - ray fluorescence spectroscopy Chemical analysis Cast - in - place glass method Standard Test Method for Viscosity and Bulk Density of YB/T 5200 Dense Refractory Castables Standard Specification for Preparation of Unshaped Refractory Specimens - Part 1. Refractory Castables

3 terms and definitions

The following terms and definitions apply to this document. 3.1 By the inner steel pipe components and the outer layer of refractory materials consisting of functional refractory products for the injection of molten iron desulfurization pretreatment.

4 grades

4.1 molten iron desulfurization spray gun according to the outer layer of refractory alumina in the mass fraction is divided into PQL-65, PQL-55, PQL-50 three grades. 4.2 grades in the P, Q, L for the "spray" "gun" and "aluminum" the first letter of the Chinese phonetic alphabet, the number of alumina mass fraction. Examples are as follows. PQL-65 Alumina mass fraction PQ stands for gun, L stands for aluminum

5 technical requirements

5.1 The steel structure of the gun should meet the design requirements. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 33361-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 33361-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 33361-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 33361-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.