GB/T 33322-2016 English PDF

US$119.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33322-2016: Rubber plasticizer -- Aromatic base mineral oil
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 33322-2016	119	Add to Cart	2 days	Rubber plasticizer -- Aromatic base mineral oil	Valid

Similar standards

GB/T 40409   GB/T 8826   GB/T 31332   GB/T 21840   GB/T 26527   

Basic data

Standard ID: GB/T 33322-2016 (GB/T33322-2016)
Description (Translated English): Rubber plasticizer -- Aromatic base mineral oil
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G71
Classification of International Standard: 83.040.20
Word Count Estimation: 6,680
Date of Issue: 2016-12-13
Date of Implementation: 2017-07-01
Regulation (derived from): National Standard Notice No.277 of 2016
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 33322-2016: Rubber plasticizer -- Aromatic base mineral oil

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber plasticizer - Aromatic base mineral oil ICS 83.040.20 G71 National Standards of People's Republic of China Rubber plasticizer Aromatic mineral oil 2016-12-13 released 2017-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some of the contents of this document may involve patents. The release of this document The Agency does not assume responsibility for identifying these patents. This standard is proposed by the China Petroleum and Chemical Industry Association. This standard by the National Rubber and Rubber Products Standardization Technical Committee Chemical Assistant Sub-Technical Committee (SAC/TC35/SC12) Go back. The drafting unit of this standard. PetroChina Karamay Petrochemical Co., Ltd., CNOOC oil and gas development and utilization company, China National Petroleum Corporation Co., Ltd. Liaohe Petrochemical Company, Petrochemical Research Institute, Suzhou Jiutai Group Co., Ltd., Guangzhou Dagang Petroleum Technology Co., Ltd. the company. The main drafters of this standard. Yang Jianxiang, Fan Xiuli, Zhou Xiuzhen, Lv Zhen, Huang Shaozhong, Yin Hong, Fu Yu'e. Rubber plasticizer Aromatic mineral oil

1 Scope

This standard specifies the labeling, technical requirements, inspection rules and packaging, marking, storage, transportation and transportation of rubbery plasticizers for aromatic mineral oils. Acceptance of goods. This standard applies to natural oil produced by the aromatic mineral oil-based rubber plasticizer. The products of this standard are suitable for rubber-butadiene rubber (SBR), butadiene rubber (BR), isoprene rubber (IR) and other rubber Into the oil filling, as well as rubber tire processing plasticized, softened oil. If the product of this standard belongs to the above range, it is recommended that the user first use the selective test before use.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, the only dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. Petroleum products - Determination of moisture content GB/T Petroleum products and hydrocarbon solvents - Determination of aniline point and mixed aniline point GB/T Measurement of kinematic viscosity of petroleum products and calculation of dynamic viscosity GB/T Petroleum and petroleum products and additives - Determination of mechanical impurities GB/T 511 GB/T 1884 Determination of density of crude oil and liquid petroleum products - Laboratory method (density meter method) GB/T 1885 Oil Meter GB/T 3535 Determination of pour point of petroleum products GB/T 3536 Determination of flash point and ignition of petroleum products Cleveland open cup method Petroleum liquid manual sampling method GB/T GB/T 4945 Determination of acid and alkali values for petroleum products and lubricants (color indicator method) Petroleum products - Determination of color GB/T 17040 Petroleum and petroleum products - Determination of sulfur content - Energy dispersive X - ray fluorescence spectroscopy Test Method for Viscosity Constant of Petroleum Fractions (VGC) for NB/SH/T 0835 NB/SH/T 0838 Determination of fused aromatic hydrocarbons (PCA) in unused lubricating base oils and asphaltene petroleum fractions Dimethyl Sulfoxide Extraction Refractive Index Method Rules for the Acceptance, Storage, Delivery and Delivery of Petroleum Products SH/T 0689 Determination of total sulfur content of light hydrocarbons and engine fuels and other oils (UV fluorescence) Determination of Refractive Index and Refractive Dispersion of Liquid Hydrocarbons SH/T 0724 Method for calculating carbon type of oil - based insulating oil SH/T 0725 SH/T 0729 Carbon distribution and structural family composition calculation of petroleum fractions (ndM method) Determination of polycyclic aromatic hydrocarbons in mineral oil

3 mark

3.1 The product (except A2530) is marked as. Product Type Carbon Type Analysis Minimum 100 ° C Movement Viscosity Center Value product name Example. A Indicating that the products belonging to this standard are aromatic mineral oil type rubber plasticizer. "A" is "Aromatic" English Aromatic Base the first letter of base. Indicating that the carbon value of CA is not less than 7%. 09 rubber plasticizer aromatic mineral oil Indicates a center value of kinematic viscosity at 100 ° C of 9 mm2/s. 3.2 The product of this standard A2530 Marking. Product Type Carbon Type Analysis Minimum 100 ℃ Kinematic Viscosity Minimum Product Name Example. A Indicating that the products belonging to this standard are aromatic mineral oil type rubber plasticizer. "A" is "Aromatic" English Aromatic Base the first letter of base. Indicating that the carbon value of CA is not less than 25%. 30 rubber plasticizer aromatic mineral oil Indicates that the minimum kinematic viscosity at 100 ° C is 30 mm2/s.

4 technical requirements

Rubber plasticizer Aromatic mineral oil technical requirements and test methods should be consistent with the provisions of Table 1. Table 1 rubber plasticizer aromatic mineral oil technical requirements and test methods project index A0709 A1004 A1020 A1220 A1426 A1820 A2530 experiment method (1) Density (20 ℃) / (kg/m3) Report Report Report Report GB/T 1884 GB/T 1885 (2) kinematic viscosity/(mm2/s) 40 ° C 100 ° C report 7 ~ 11 report 3 ~ 5 report 16 ~ 26 report 16 ~ 26 report 22 ~ 30 report 16 ~ 26 report ≥30 GB/T 265 (3) Flash point/° C ≥ 190 165 210 210 210 220 230 GB/T 3536 (4) Pour point/℃ ≤ 15 -10a 15 15 15 20 20 GB/T 3535 (5) aniline point/° C ≤ 90 85 99 95 95 85 75 GB/T 262 (6) Chroma/number ≤ 1.5 0.5 - - - - - GB/T 6540 (7) Acid value (in KOH)/(mg/g) ≤ 0.5 0.5 Reporting report Report report GB/T 4945 (8) Refractive index n20D report report report report SH/T 0724 (9) Viscosity constant (VGC) Report with report of this report NB/SH/T 0835 (10) sulfur content b/(mg/kg) Sulfur content (mass fraction) b /% Report Report Report Report SH/T 0689 GB/T 17040 (11) Mechanical impurities (mass fraction) /% None None None None None None None GB/T 511 (12) Moisture (volume fraction) /% Traces Traces Traces Traces Traces Traces GB/T 260 (13) Fused aromatic hydrocarbon (PCA) content /% < 3 3 3 3 3 3 3 NB/SH/T 0838 Table 1 (continued) project index A0709 A1004 A1020 A1220 A1426 A1820 A2530 experiment method (14) Carbon type analysis c /% CA ≥ CN CP report report report report report report report report report report report report report report SH/T 0725 SH/T 0729 (15) sum of eight polycyclic aromatic hydrocarbons (PAHs) (Mg/kg) ≤ Of which. 1) benzo (a) pyrene ≤ 2) benzo (e) pyrene 3) benzo (a) anthracene 4) 5) benzo (b) fluoranthene 6) benzo (j) fluoranthene 7) benzo (k) fluoranthene 8) dibenzo (a, h) anthracene report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report report SN/T 1877.3- First method A The user agrees that the indicator may be negotiated by both parties. B According to the actual sulfur content of oil selected one of the detection method can be. C In the event of controversy, the hydrorefining products are SH/T 0729 as the arbitration method; the non-hydrorefining products are SH/T 0725 as the arbitration method.

5 inspection rules

5.1 Classification of tests 5.1.1 Factory inspection 5.1.1.1 Factory inspection items. (1) to (14) in Table 1 are factory inspection items. 5.1.1.2 Factory cycle inspection items. The sum of the eight polycyclic aromatic hydrocarbons (PAHs) in paragraph (15) of Table 1 and their sub-items are the factory cycle test project. The inspection period is 6 months. 5.1.2 Type inspection The type inspection items are all the inspection items specified in Table 1. The type test is carried out in the following cases. A) changes in the nature of crude oil, processing conditions change and maintenance after the start of the situation; B) the factory inspection results and the previous type of test results are quite different. 5.2 Group Batch Rules The standard products in the raw materials, the same process conditions, the production of a product for each batch of a can. 5.3 Sampling The sampling of the products belonging to this standard shall be carried out according to GB/T 4756, and the sampling volume shall be 2L for inspection and retention. 5.4 Qualified judgment When the test results of the products belonging to this standard are in accordance with the requirements of Table 1, it is determined that the products are qualified. If the test results of the batch There is an indicator does not meet the requirements of Table 1, according to the provisions of GB/T 4756 re-take double samples for re-examination, there is still a re-examination results Indicators do not meet the requirements of Table 1, then determine the batch of products failed. 6 Packaging, marking, storage, transportation and delivery acceptance The packaging, marking, storage, transportation and delivery acceptance of the products belonging to this standard shall be carried out according to SH0164. 6102- T / ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 33322-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 33322-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 33322-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 33322-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.