GB/T 33301-2016 English PDFUS$199.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 33301-2016: Calculating and evaluation methods of energy saved for coal industrial boilers and furnaces Status: Valid
Basic dataStandard ID: GB/T 33301-2016 (GB/T33301-2016)Description (Translated English): Calculating and evaluation methods of energy saved for coal industrial boilers and furnaces Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: F01 Classification of International Standard: 27.010 Word Count Estimation: 10,192 Date of Issue: 2016-12-13 Date of Implementation: 2017-07-01 Regulation (derived from): National Standard Notice No.256 of 2016 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 33301-2016: Calculating and evaluation methods of energy saved for coal industrial boilers and furnaces---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Calculating and evaluation methods of energy saved for coal industrial boilers and furnaces ICS 27.010 F01 National Standards of People's Republic of China Calculation method of energy saving of boiler and kiln in coal - fired industry 2016-12-13 released 2017-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by China Coal Industry Association. This standard is under the jurisdiction of the National Coal Standardization Technical Committee (SAC/TC42). The drafting of this standard. Coal Science and Technology Research Institute Co., Ltd. Coal Chemical Branch, the coal industry energy-saving technical service center. The main drafters of this standard. Zhang Guoguang, Luo meteorite, even into the Beijing, Cai Zhidan. Calculation method of energy saving of boiler and kiln in coal - fired industry1 ScopeThis standard specifies the basic principles of the energy saving calculation of the boiler and kiln in the coal-fired industry, the principle of the value of the standard value of the energy standard, Sector, energy saving calculation, the relevant parameters of the test method, energy saving assessment method. This standard is applicable to the calculation and evaluation of energy saving of coal-fired industrial boilers and kiln energy-saving technological transformation projects (hereinafter referred to as "projects"). new Construction projects, management of energy-saving projects can also refer to the use of energy.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. Method for determination of calorific value of GB/T Test code for thermal performance of GB/T 10180 industrial boilers Calculation method of energy saving in enterprises GB/T 13234 General rules for the preparation and management of energy - carrying units Test and calculation method of thermal balance and thermal efficiency of ceramic kiln GB/T Method for determination of heat balance of cement rotary kiln GB/T 262823 terms and definitionsThe following terms and definitions apply to this document. 3.1 Energy saving energizes Coal-fired industrial boilers and kilns before and after the implementation of energy-saving technical measures to meet the same needs or to achieve the same purpose under the conditions to reduce energy consumption The amount of charge, expressed in tons of standard coal. 3.2 Energy saving rate Coal-fired industrial boilers and kilns to implement energy-saving technical measures before and after the unit energy consumption reduction rate, expressed as a percentage. Basic principles Coal-fired industrial boilers and kilns in the technical transformation project energy efficiency calculation and evaluation, should follow the following basic principles. a) The equipment, installation, verification or calibration of energy metering equipment shall be carried out in accordance with GB 17167. b) The control device and instrument shall be in good condition and shall be qualified or calibrated in accordance with the relevant regulations. c) The operating records should be complete and accurate; the technical files are complete. d) After the energy-saving technological transformation is completed and the continuous and stable operation can be carried out, the energy saving calculation and evaluation can be carried out. The energy statistics period is Before and after the transformation of the year. e) When calculating the energy consumption in the reporting period using a survey interval energy consumption, the reason and the rationality of the projections should be stated. f) Energy savings should be calculated using the corresponding benchmark. Industrial boilers should use the actual output unit calorific value of the energy consumption as a ratio ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33301-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 33301-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 33301-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33301-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
