GB/T 33293-2016 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 33293-2016: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure Status: Valid
Basic dataStandard ID: GB/T 33293-2016 (GB/T33293-2016)Description (Translated English): Determination of shrinkage and expansion of well cement formulations at atmospheric pressure Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: E13 Classification of International Standard: 75.020 Word Count Estimation: 14,163 Date of Issue: 2016-12-13 Date of Implementation: 2017-07-01 Regulation (derived from): National Standard Notice No.208 of 2016 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 33293-2016: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Determination of shrinkage and expansion of well cement subscriptions at atmospheric pressure ICS 75.020 E13 National Standards of People's Republic of China Determination of Shrinkage and Expansion of Cement Cement under Atmospheric Pressure Determination ofshrinkageandexpansionofwelcementformulations (ISO 10426-5..2004, Petroleumandnaturalgasindustries- Part 5. Determination ofshrinkageandexpansionofwel cementformulationsatatmosphericpressure, MOD) 2016-12-13 released 2017-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface I 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 4 Sampling 1 Determination of shrinkage and swelling under normal pressure water bath - Ring test Determination of shrinkage and swelling under atmospheric pressure - Film test ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the re-drafting method to amend the use of ISO 10426-5..2004 "oil and gas industry cementing cement and materials No. 5 Part. Determination of shrinkage and expansion of oil well cement at atmospheric pressure ". This standard has a structural change compared to ISO 10426-5..2004, with 5.2.1.4 added, and 3.3 in ISO 10426-5..2004. There are technical differences between this standard and ISO 10426-5..2004, and the terms involved in these differences have passed through the margin The vertical single line (│) of the position is marked. The technical differences between this standard and ISO 10426-5..2004 are as follows. --- modified "1 Scope" because ISO 10426-5..2004 "1 scope" discussion in general, does not include specific test methods, Not meet the requirements of our standard preparation (see Chapter 1); --- on the normative reference documents, this standard has made a technical differences in the adjustment to meet China's technical conditions, adjust the situation The situation is reflected in Chapter 2, "Normative references", as follows. Replace GB 10426-2..2003 (see Chapter 2) referenced in ISO 10426-5..2004 with GB/T 19139; ● Added the reference document "GB/T 10238 Oil Well Cement" (see Chapter 2). - "3.3hydrationshrinkage" term for ISO 10426-5..2004 was removed because "3.3hydrationshrinkage" ISO 10426-5..2004 "Introduction" appears, and this standard removed the "Introduction", so the standard to remove "3.3hydrationshrinkage" (see ISO 10426-5..2004, 3.3); --- "5.2.1.4 modified syringe" has been added, since a syringe is required in the test and can be adapted to this standard (see 5.2.1.4). This standard has made the following editorial changes. --- the standard name is changed to "atmospheric pressure under the cement cement shrinkage and expansion of the determination"; --- Deleted the preface and introduction of ISO 10426-5..2004; --- The amount of USC units in ISO 10426-5..2004 is deleted, all SI units are used; --- Deleted ISO 10426-5..2004 in the USC unit formula, this standard are used SI unit formula. This standard is proposed by the National Petroleum and Natural Gas Standardization Technical Committee (SAC/TC355). The drafting unit of this standard. China Petroleum & Chemical Corporation Petroleum Engineering Technology Research Institute. The main drafters of this standard. Ding Shidong, Wang Xiaojing, Zhou Shiming, Tao Qian, Chen Lei, Zhang Mingchang, Xiao Jingnan, Liu Xiaogang. Determination of Shrinkage and Expansion of Cement Cement under Atmospheric Pressure1 ScopeThis standard specifies the measurement method of the shrinkage and expansion of oil well cement under normal pressure water bath condition, and the oil well cement Method for determination of shrinkage and expansion. This standard is applicable to the measurement of shrinkage and expansion of cement in oil well under normal pressure.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 10238 Oil well cement (ISO 10426-1..2009, MOD) GB/T 19139 Test method for oil well cement (ISO 10426-2..2003, MOD)3 terms and definitionsThe following terms and definitions apply to this document. 3.1 Volume bulge bulkexpansion The appearance or size of the cement sample increases. 3.2 Volume shrinks bulkshrinkage The appearance or size of the cement sample is reduced.4 Sampling4.1 General This standard for cement slurry tests may require pure cement or cement mixes, solid and liquid admixtures, and mixed water samples. Should be used The best available sampling technology to ensure that laboratory test conditions, materials and the scene as close as possible. Common samplers should be matched GB/T 19139. 4.2 method According to the provisions of GB/T 19139 implementation. 5 Determination of shrinkage and swelling under normal pressure water bath - Ring test 5.1 General The annular expansion die is a test instrument used only to measure the linear volume shrinkage or expansion performance of a cement system. The purpose of this test method ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33293-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 33293-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 33293-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33293-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
