GB/T 33159-2016 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 33159-2016	200	Add to Cart	Auto, < 3 mins	Steel cord test method	Valid

Similar standards

GB/T 33026   GB/T 32795   GB/T 33363   GB/T 16271   GB/T 45460   

Basic data

Standard ID: GB/T 33159-2016 (GB/T33159-2016)
Description (Translated English): Steel cord test method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H49
Classification of International Standard: 77.140.65
Word Count Estimation: 30,318
Date of Issue: 2016-10-13
Date of Implementation: 2017-09-01
Regulation (derived from): National Standard Notice No.1716 of 2016
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 33159-2016: Steel cord test method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Steel cord test method ICS 77.140.65 H49 National Standards of People's Republic of China Steel cord test method 2016-10-13 released 2017-09-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface I 1 Scope 1 2 Specimen General Provisions 1 3 Appearance quality 1 4 size performance 1 5 Process performance 6 6 Mechanical properties 8 7 Test method for chemical properties of coatings 13 Test Method for Adhesive Properties Appendix A (informative) Vulcanization Mold and Cover 25 Appendix B (informative) Vulcanization pull clamps

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by China Iron and Steel Industry Association. This standard is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183). The drafting unit of this standard. Anshan Iron and Steel Co., Ltd. Bekaert tire (Chongqing) Co., Ltd., the national wire rope product quality supervision and inspection center, Gold Industry Information Standards Institute, Triangle Tire Co., Ltd., Shandong Shengtong Steel Cord Co., Ltd. The main drafters of this standard. Cao Min, Chen Lu, Kuang Yihua, Wang Lingjun, Ren Cuiying, Wang Peibin, Chen Jianhao, Yao Shulin, Li Chunxia, Wang Jifeng, Wang Bo. Steel cord test method

1 Scope

This standard specifies the test principle, test equipment, sample preparation, test procedure for the performance test method of the steel cord for radial tire, Test report and so on. This standard is applicable to the test of steel cord for radial tire (hereinafter referred to as "steel cord"), including appearance quality, size performance, process Mechanical properties, coating chemical properties and adhesive properties of the test.

2 Specimen General

For test steel cord samples, need to use the fuse from the finished product wheel, and to ensure that the sample without loose, bending, damage, etc. Trap, outside the wire around the structure of the sample should ensure that both ends of the fuse around the wire and the core strand is not well connected between the loose. For chemical performance testing and bonding The test specimen of the performance test shall ensure that the surface of the specimen is free of contamination. If necessary, pull out a certain length of steel cord discarded and then take the test sample.

3 appearance quality

Visual inspection of steel cord appearance whether there are back wire (back), as the core, flip, blister, coil, wave, hard bend and other defects.

4 size performance

4.1 steel cord diameter 4.1.1 Micrometer measuring steel cord diameter 4.1.1.1 Test equipment The test equipment is as follows. a) Public micrometer, recommended non-rotating mandrel micrometer, see Figure 1. Measuring range. 0mm ~ 25mm, accuracy. 0.001mm. Measuring end face. rounded face diameter greater than the measured sample a twist; measuring force range. < 10N, recommended 3N ~ 5N. Recommended use. Flatness Tolerance range. 0.002mm; Parallelism Tolerance range. 0.015mm. Figure 1 male normal micrometer diagram ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 33159-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 33159-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 33159-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 33159-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.