GB/T 32112-2015 English PDFUS$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 32112-2015: Determination of peroxide in oral care products -- High performance liquid chromatography method Status: Valid
Basic dataStandard ID: GB/T 32112-2015 (GB/T32112-2015)Description (Translated English): Determination of peroxide in oral care products -- High performance liquid chromatography method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y43 Classification of International Standard: 71.100.70 Word Count Estimation: 8,854 Date of Issue: 2015-10-13 Date of Implementation: 2016-05-01 Quoted Standard: GB/T 6682 Regulation (derived from): National Standard Announcement 2015 No.33 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the HPLC oral care products in points peroxide method, reagents and reference materials, instruments, analysis step, the results of the calculation, the recovery rate, standard deviation. This Standard applies to the release of hydrogen peroxide and other peroxide compounds or mixtures (such as carbamide peroxide and zinc peroxide) for the determination of oral care products, raw material content of peroxides. This Standard peroxide content of hydrogen peroxide meter, the detection limit was 0.3��g/mL, the limit of quantification of 2.0��g/mL. If you take 1.0g sample, hydrogen peroxide minimum detectable concentration of 30mg/kg, the minimum detectable concentration of 200mg/kg. GB/T 32112-2015: Determination of peroxide in oral care products -- High performance liquid chromatography method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Oral care products - Determination of peroxide HPLC method) ICS 71.100.70 Y43 National Standards of People's Republic of China Determination of peroxide in oral care products The method of high performance liquid chromatography Issued on. 2015-10-13 2016-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China National Light Industry Council. The standard oral care products by the National Technical Committee of Standardization Technical Committee toothpaste (SAC/TC492/SC1) centralized. This standard was drafted. National Light Industry Products Quality Supervision and Inspection toothpaste Wax Center, Yunnan Baiyao Group Co., Ltd., Beijing Haidian District, product quality supervision, inspection, Hangzhou quality technical supervision detection hospital. The main drafters of this standard. Zheng and Wei, Gao Ying, Lixian Bo, Sun East, Meng Yu, Shen Rui calyx, still dimension An Xiaoguang. Determination of peroxide in oral care products The method of high performance liquid chromatography1 ScopeThis standard specifies the method points Determination of peroxide in oral care products, reagents and reference materials, equipment, Step analysis, the results of the calculation, the recovery rate, standard deviation. This standard applies to the release of hydrogen peroxide and other peroxide compounds or mixtures (such as carbamide peroxide and zinc peroxide) as raw materials Determination of the peroxide content of oral care products. This standard peroxide content of hydrogen peroxide meter, the detection limit was 0.3μg/mL, the limit of quantification of 2.0μg/mL. If you take 1.0g Sample, hydrogen peroxide minimum detectable concentration of 30mg/kg, the minimum detectable concentration of 200mg/kg.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. Laboratory use specifications and test methods GB/T 6682 Analysis Method 3 points Flooding the sample using extraction reaction releases hydrogen peroxide. A portion of the supernatant was reacted with triphenylphosphine derivatized, derivatized solution was filter through Filter, by liquid chromatography, UV detector, calculated using internal standard method to obtain a sample of hydrogen peroxide content.4 Reagents and Standards4.1 Unless otherwise stated in the analysis using only recognized as analytical grade reagents and water GB/T 6682 provided a water. 4.2 acetonitrile. chromatography. 4.3 triphenylphosphine solution. Weigh triphenylphosphine 1.3g, dissolved in acetonitrile, the volume to 25mL, concentration of 0.2mol/L, using now. 4.4 Hydrogen peroxide. 30%, AR. 4.5 3% hydrogen peroxide solution. an amount of 10mL of hydrogen peroxide (30%), water volume to 100mL, should be calibrated before use, calibration party See Appendix B. Method 4.6 Hydrogen peroxide standard stock solution. Weigh a 3% hydrogen peroxide solution (4.5) 3.4g, accurate to 0.0001g, placed in 100mL brown capacity Bottle with water to volume, shake, formulated as a concentration of 1000mg/L of standard stock solution. 4.7 Hydrogen peroxide standard working solution. accurate Pipette stock solution of hydrogen peroxide (4.4), the preparation of water quality concentrations of 5mg/L, 10mg/L, 50mg/L, 100mg/L, 200mg/L, Standard Series 300mg/L working solution. 4.8 diethyl phthalate (DEP). chromatography. 4.9 diethyl phthalate (DEP) internal standard solution. Weigh diethyl phthalate (DEP) (4.8) 0.5g, accurate to 0.0001g, Placed in 500mL flask with acetonitrile to volume, shake. The concentration of 1000mg/L. 4.10 Solvent. preparation of the test solution required acetonitrile and water, acetonitrile first sonication, boiling water was degassed, purged with nitrogen and then processed. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32112-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 32112-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 32112-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32112-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |