GB/T 31522-2015 English PDF

US$514.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31522-2015: Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb (3) Sn composite superconducting wires
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 31522-2015	514	Add to Cart	4 days	Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb (3) Sn composite superconducting wires	Valid

Similar standards

GB/T 37201   GB/T 34482   GB/T 34190   GB/T 45324   GB/T 31527   

Basic data

Standard ID: GB/T 31522-2015 (GB/T31522-2015)
Description (Translated English): Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb (3) Sn composite superconducting wires
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H21
Classification of International Standard: 77.040.99
Word Count Estimation: 26,240
Date of Issue: 2015-05-15
Date of Implementation: 2015-12-01
Quoted Standard: IES 60050-815; IEC 61788-5
Adopted Standard: IEC 61788-12-2013, IDT
Regulation (derived from): National Standard Announcement 2015 No. 15
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the test method Cu/Nb (3) Sn copper and non-copper wire volume ratio. This Standard applies to cross-section of 0.1 mm (2) ~ 3.0mm (2), copper and non-copper volume ratio of greater than or equal to 0.1 Nb (3) Sn compound superconducting wire. This Standard diameter of the core wire is not required, but not for Sn, Cu-Sn alloy, the barrier material or other non-copper portions dispersed in the copper matrix superconducting wire, does not apply to the stability of the superconducting wire material is dispersed.

GB/T 31522-2015: Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb (3) Sn composite superconducting wires

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb (3) Sn composite superconducting wires ICS 77.040.99 H21 National Standards of People's Republic of China Matrix and superconductor volume ratio test Nb3Sn composite superconducting wires of copper and non-copper volume ratio (IEC 61788-12.2013, Superconductivity-Part 12. Matrixtosuperconductor Nb3Sncompositesuperconductingwires, IDT) Issued on. 2015-05-15 2015-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Principle 1 5 means 1 6 measuring step 2 6.1 Sample Preparation 2 6.2 Measurement 2 6.3 Test procedure in the second sample 3 6.4 Quality Paper 3 7 Calculation of results 3 Uncertainty of Test Method 8 3 9 Test Report 3 9.1 copper and non-copper volume ratio report 3 Identify the test sample 4 9.2 Appendix A (normative) Measurement Image Processing Method 5 Appendix B (normative) Measurement of copper Quality Act 6 Annex C (normative) planimeter measurements 7 Polishing method Appendix D (informative) Sample 8 Differences Appendix E (Informative Appendix) Nb3Sn phase into a heat treatment before and after copper and non-copper volume ratio of 9 Annex F (informative) when copying paper quality deviations 10 Appendix G (Informative Appendix) Cu/Nb3Sn wire cross-section 11 Appendix H (informative) Uncertainty consider 12 Annex I (Information Appendix) Nb3Sn composite superconducting wires of copper and non-copper volume ratio of Uncertainty Evaluation Test Method 16 References 21

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The use of translation method is equivalent to using the standard IEC 61788-12.2013 (Ed.2.0) "Superconductivity - Part 12. matrix and superconductor body Volume ratio test Nb3Sn composite superconducting wires of copper and non-copper volume ratio. " Correspondence between the consistency of the standards of international documents and normative references of the following documents. --- GB/T 13811-2003 Electrotechnical terminology superconductivity (IEC 60050-815.2000, MOD); --- GB/T 22587-2008 matrix and superconductor volume ratio measurement of Cu/Nb-Ti composite superconductors copper - Ultra [volume] measured ratio Amount (IEC 61788-5.2000, MOD). Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This standard was proposed by the Chinese Academy of Sciences. This standard by the National Standardization Technical Committee superconducting (SAC/TC265) centralized. This standard was drafted. Western superconducting materials Technology Co., Ltd., Institute of Physics, Northwest Nonferrous Metal Research Institute, Beijing Nonferrous Metal Research Institute. The main drafters. Zhang Ke, Feng Ran, Liu Yiping, Xiong Xiaomei, Zheng Minghui, Wang Dayou.

Introduction

Copper and non-copper volume ratio of superconducting wire two important features characterizing parameters, an important parameter that is the critical current density and stability of the wire. The standard specification of copper stabilizing material multi-core Nb3Sn composite superconducting wires (hereinafter referred to as Cu/Nb3Sn wire) copper and non-copper volume ratio Test Methods. Depending on the layout of stabilizing material, Cu/Nb3Sn wire can be divided into four categories (see Appendix G). outside the stable, in the stable, stable dispersion Stereotypes around stable. Test methods specified in this standard applies to all kinds of external processing technology made stabilized or stable inner wire. These test methods include paper weighing method, image processing methods, such as. Paper weighing method, this method requires the wire cross-sectional pictures described in the paper copy or tracing paper, then cut and weighed the different parts. Image processing method, this method uses software to analyze the photo on the wire cross section. Copper mass method, this method uses nitric acid to dissolve and remove a sample of copper only non-copper portion, measuring quality and non-copper part of the quality of the sample. Within stable Cu/Nb3Sn wire with a copper matrix Nb-Ti line is different, it is not suitable for copper Quality Act, because it interferes with the internal structure Hinder dissolve and remove copper. The body of the standard involved are the most commonly used paper weighing method. Other methods Cu/Nb3Sn wire applicable, an image processing method and copper Quality Act are in Appendix A and Appendix B in the introduction, Appendix C describes the planimeter method described in Appendix D is a method of polishing Instance. Matrix and superconductor volume ratio test Nb3Sn composite superconducting wires of copper and non-copper volume ratio

1 Scope

This standard specifies the test methods Cu/Nb3Sn wire copper and non-copper volume ratio. This standard applies to the cross sectional area of \u200b\u200b0.1mm2 ~ 3.0mm2, copper and non-copper volume ratio greater than or equal to 0.1 Nb3Sn composite super wire. The standard diameter of the core wire is not required, but not for Sn, Cu-Sn alloy, the barrier material or other non-copper portions dispersed Copper matrix superconducting wire, not suitable for stabilizing the superconducting wire material is dispersed. In addition, copper and non-copper volume ratio measured in Nb3Sn A phase before or after the heat treatment can be performed (see Appendix E). The standard of Cu/Nb3Sn wire has an integral structure circular or rectangular cross-section. Despite the uncertainty increased cross-sectional area of \u200b\u200bthe standard test method for copper and non-copper volume ratio beyond the standard range Cu/Nb3Sn wires are also suitable. The appropriate modifications, test methods given in this standard may be applied to other composite superconducting wire.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. IEC 60050-815 International Electrotechnical Vocabulary - Part 815. Superconductivity (Internationalelectrotechnical vocabulary-Part 815. Superconductivity) IEC 61788-5 Superconductivity - Part 5. matrix and superconductor volume ratio measurement of Cu/Nb-Ti composite superconductors copper - Ultra [body Product] ratio measurement (Superconductivity-Part 5. Matrixtosuperconductorvolumeratiomeasurement- CoppertosuperconductorvolumeratioofCu/Nb-Ticompositesuperconductors)

3 Terms and Definitions

And the following terms and definitions as defined in IEC 60050-815 apply to this document. 3.1 Copper and non-copper volume ratio coppertonon-coppervolumeratio Cu/Nb3Sn wire copper and non-copper volume ratio is defined as the ratio of the volume of material such as copper wire and stable region and the non-wire copper area. Principle 4 This standard uses the principle of the method is described as follows. The optical microscope to take a cross section of the wire samples polished photos and on tracing paper Depicts or use a copy machine. Then press area cut and measure the different parts of the mass, and then calculate the copper and non-copper volume ratio.

5 device

Needed for testing apparatus comprising. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 31522-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 31522-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 31522-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 31522-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.