GB/T 31468-2015 English PDFUS$434.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 31468-2015: Petroleum and natural gas industries -- Pipeline transportation systems -- Recommended practice for pipeline life extension Status: Valid
Basic dataStandard ID: GB/T 31468-2015 (GB/T31468-2015)Description (Translated English): Petroleum and natural gas industries -- Pipeline transportation systems -- Recommended practice for pipeline life extension Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: E98 Classification of International Standard: 75.200 Word Count Estimation: 22,223 Date of Issue: 2015-05-15 Date of Implementation: 2015-08-01 Quoted Standard: ISO 13623 Adopted Standard: ISO 12747-2011, IDT Regulation (derived from): National Standard Announcement 2015 No. 15 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the assessment as defined in the piping system remain in service beyond the design life of the feasibility of the minimum required guidelines. This Standard is shown in Figure 1 pumping station, compressor station, vacuum station, and reservoirs without any specific requirements. This Standard applies to rigid metal conduit, does not apply to the following conditions: a) a flexible pipe; b) other material conduit, such as glass pipes; c) umbilicals; d) platform upper structure and facilities; e) structures and structural components. As an example of this standard to make changes to the original design, and used only for the pipeline life extension. It does not include other changes, such as increased MAOP. GB/T 31468-2015: Petroleum and natural gas industries -- Pipeline transportation systems -- Recommended practice for pipeline life extension---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Petroleum and natural gas industries. Pipeline transportation systems. Recommended practice for pipeline life extension ICS 75.200 E98 National Standards of People's Republic of China Oil and natural gas industries - Pipeline transportation systems Recommended practice for pipeline life extension (ISO 12747.2011, IDT) Issued on. 2015-05-15 2015-08-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 2 3 Terms and definitions 2 4 Abbreviations 4 4 5 Life Extension Overview 6 Data collection 7 7 the technical integrity of the piping system 9 8 9 next Hazards Identification 10 9 Life Extension Assessment 10 Life Extension reports 16 References 18 1 piping systems range covered by this standard 1 2 pipe system life extension assessment process 5 Figure 3 Life Extension and Remaining Life of 6 4 Risk Assessment Process 11 5 Risk management process 11 6 upper and lower corrosion rate in 14 Table of Contents 1 Life Extension reports 16ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses the translation method identical with ISO 12747.2011 "Petroleum and natural gas industries - Pipeline transportation systems recommended for pipeline life extension law". Correspondence between the consistency of the standards of international documents and normative references of the following documents. GB/T 24259-2009 Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623-2000, MOD). This standard made the following editorial changes. --- Remove the ISO 12747.2011 Foreword and Introduction; --- Increasing the preface of this standard; --- Use the "standard" instead of "this International Standard." This standard by the National Standardization Technical Committee of Oil and Gas (SAC/TC355) and focal points. This standard was drafted. China PetroChina Pipeline Company, GE Oil Solutions, Institute of Metal Research. The main drafters of this standard. Yan Bingchuan, Feng Qingshan, Gu Guangming, Han Enhou, Wang Xueli, Hai-Liang Zhang, sword Zhou, Peng Chen Chao, cattle country rich, Gu Biao, Liu. Oil and natural gas industries - Pipeline transportation systems Recommended practice for pipeline life extension1 ScopeThe ISO 13623 standard gives an assessment as defined in the piping system design life beyond the minimum requirements of the feasibility of continuing the service guide then. The standard pumping station shown in Figure 1, compressor stations, pressure reducing stations and reservoirs do not have any specific requirements. This standard applies to rigid metal pipes, does not apply to the following. a) a flexible pipe; b) Other material conduit, such as glass pipes; c) umbilicals; d) platform superstructure and facilities; e) structures and structural components. As an example of the standard of the original design changes, only for pipeline life extension. It does not include other changes, such as increased MAOP. NOTE. After careful consideration of the user, this method can be used to assess other design changes.1 piping systems range covered by this standard......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31468-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 31468-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 31468-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31468-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
