GB/T 31391-2015 PDF EnglishUS$170.00 · In stock · Download in 9 seconds
GB/T 31391-2015: Ultimate analysis of coal Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 31391-2015: Ultimate analysis of coal---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT31391-2015NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 73.040 D 21 Ultimate analysis of coal (ISO 17247.2013, Coal - Ultimate analysis, MOD) Issued on. MAY 15, 2015 Implemented on. JULY 01, 2015 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People's Republic of China. Table of ContentsForeword... 3 1 Scope... 4 2 Normative references... 4 3 Terms and definitions... 4 4 Method summary... 5 5 Test methods... 5 6 Result expression... 5 7 Test report... 8 Annex A (informative) Comparison on chapter and subchapter numbers between this Standard and ISO 17247.2013... 10 Annex B (informative) Technical differences between this Standard and ISO 17247.2013 and their reasons... 11 Annex C (informative) Examples of ultimate analysis of coal... 12ForewordThis Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard uses redrafting method to modify and adopt ISO 17247.2013 “Coal - Ultimate analysis”. Compared with ISO 17247.2013, this Standard has more structural adjustments. Annex A lists the comparison on chapter and subchapter numbers between this Part and ISO 17247.2013. There are technical differences between this Standard and ISO 17247.2013.The terms to which these differences relate have been indicated by a vertical single line (∣) in their outer margins. A list of the corresponding technical differences and their reasons is given in Annex B. This Standard also makes the following editorial modifications. - Change “this International Standard” to “this Standard”; - Use decimal point "." to replace comma "," in the ISO standard. This Standard was proposed by China Coal Industry Association. This Standard shall be under the jurisdiction of National Technical Committee on Coal of Standardization Administration of China (SAC/TC 42). The drafting organizations of this Standard. Coal Research Institute Testing and Research Branch, Shenhua Sales Group Co., Ltd. Main drafters of this Standard. Li Ting, Wang Runye, Xing Yongfeng, Pi Zhongyuan. Ultimate analysis of coal1 ScopeThis Standard specifies the terms and definitions, method summary, test methods, result expression and test report of ultimate analysis of coal. This Standard applies to coal.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 211, Determination of total moisture in coal3 Terms and definitionsFor the purposes of this document, the terms and definitions defined in GB/T 483 and GB/T 3715 apply. It is obtained by subtracting the carbon, hydrogen, nitrogen, sulfur, ash and moisture of coal from 100, expressed in mass fraction.4 Method summaryCarry out the experimental analysis of coal carbon, hydrogen, nitrogen, sulfur, ash and moisture. Oxygen is calculated by subtraction.5 Test methodsAccording to the test method specified in Table 1, the carbon, hydrogen, nitrogen, sulfur, ash and moisture of coal are measured, respectively.6 Result expressionCalculate the air-drying basis hydrogen (Hm,ad) content including hydrogen in moisture according to formula (2). The test results of carbon, hydrogen, nitrogen, sulfur, ash and moisture of coal and calculated oxygen by difference are expressed in mass fraction. Except for oxygen by difference, other items can be converted based on GB/T 483.7 Test reportThe test report shall include at least the following information.Annex A(informative) Comparison on chapter and subchapter numbers between this Standard and ISO 17247.2013Annex B(informative) Technical differences between this Standard and ISO 17247.2013 and their reasonsAnnex C(informative) Examples of ultimate analysis of coal The examples of ultimate analysis of coal are shown in Table C.1. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 31391-2015 be delivered?Answer: The full copy PDF of English version of GB/T 31391-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 31391-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31391-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 31391-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 31391-2015?A step-by-step guide to download PDF of GB/T 31391-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 31391-2015". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |