GB/T 31207-2014 English PDFUS$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 31207-2014: Quality management requirements for machinery products remanufacturing Status: Valid
Basic dataStandard ID: GB/T 31207-2014 (GB/T31207-2014)Description (Translated English): Quality management requirements for machinery products remanufacturing Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J04 Classification of International Standard: 01.040.25 Word Count Estimation: 7,771 Date of Issue: 9/3/2014 Date of Implementation: 5/1/2015 Quoted Standard: GB/T 19000-2008; GB/T 19001; GB/T 28619-2012 Regulation (derived from): People's Republic of China Announcement of Newly Approved National Standards No. 21 of 2014 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the mechanical product remanufacturing quality management requirements. This Standard is applicable to all kinds of organizations mechanical products in China remanufacturing. GB/T 31207-2014: Quality management requirements for machinery products remanufacturing---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Quality management requirements for machinery products remanufacturing ICS 01.040.25 J04 National Standards of People's Republic of China Mechanical product remanufacturing quality management requirements 2014-09-03 released 2015-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed and managed by the National Green Manufacturing Technology Standardization Technical Committee (SAC/TC337). This standard is mainly drafted by. National Defense Key Laboratory of Equipment Remanufacturing Technology, Hefei University of Technology, China Machine Productivity Promotion Center, Shanghai Entry-Exit Inspection and Quarantine Bureau, China National Heavy Duty Truck Group Co., Ltd. Jinan Fu Qiang, Mechanical Products Remanufacturing National Engineering Research Center, People's Liberation Army No. 5719 Factory, China Mechanical and Electrical Equipment Maintenance and Transformation Technology Association, Zoomlion Co., Ltd.. The main drafters of this standard. Xu Bin disabilities, Zhang Wei, Liu Bohai, Shi Peijing, Zhou Xinyuan, Li En heavy, Xi Daoyun, Wu Yiwen, Luo Jianming, Liu Huan, Zhu Sheng, Wang Haidou, Liang Xiubing, Wei Shicheng, Yu Helong, Xiang Qiao, Sun Qiaoling, Qiao Yulin, Cai Zhihai, Wang Wenyu, Zheng Han Dong, Kwong Ho, Wang Jia Qian. Mechanical product remanufacturing quality management requirements1 ScopeThis standard specifies the mechanical product remanufacturing quality management requirements. This standard applies to all types of organizations in China remanufacturing machinery products.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 19000-2008 quality management system foundation and terminology GB/T 19001 quality management system requirements GB/T 28619-2012 Remanufacturing terminology3 Terms and definitionsGB/T 19000-2008 and GB/T 28619-2012 define the following terms and definitions apply to this document. 3.1 Remanufacturingprocessing The process of forming parts for remanufactured parts.4 General rules4.1 Remanufacturing organizations shall establish a quality management system in accordance with the requirements of GB/T 19001. 4.2 The scope of the quality management system established by OEMs undertaking remanufacturing operations should include the organization's remanufacturing operations. 4.3 Remanufacturing Quality management should reflect the quality characteristics of remanufactured products not less than the requirements of prototype new products.5 quality management requirements5.1 basic requirements 5.1.1 Remanufacturing organizations to determine the quality policy should reflect the accelerated development of circular economy, building a resource-saving society and environment-friendly society Will be the purpose. 5.1.2 Remanufacturing organizations should have or have relevant knowledge of remanufacturing mechanical products, remanufacturing knowledge of relevant laws and regulations, and quality The ability to manage actual operations. 5.1.3 Remanufacturing Organization's Quality Objectives should reflect the quality characteristics of remanufactured products. 5.1.4 Remanufacturing organization should have the necessary quality inspection methods. 5.1.5 Remanufacturing organizations in the preparation of remanufacturing inspection procedures, the safety, environmental protection, energy saving and other aspects of regulatory compliance, customer special requirements, Remanufactured products, special testing requirements should pay special attention. 5.1.6 Remanufacturing organizations shall be familiar with and master the requirements of remanufactured products from component inspection, process inspection to finished product inspection. 5.2 remanufacturing rough recovery process quality management requirements 5.2.1 The remanufacturing organization shall have a standardized system for the remanufacturing of rough materials and shall evaluate the suppliers in accordance with relevant regulations. 5.2.2 Waste mechanical products should be made in the recovery process necessary protection, to avoid damage in the recovery process. 5.2.3 Recycling should be carried out preliminary inspection of used mechanical products, in line with remanufacturing requirements for remanufacturing rough. 5.3 remanufacture of blank dismantling, cleaning process quality management requirements 5.3.1 Remanufacturing organization shall have the equipment and ability to disassemble and clean mechanical products. 5.3.2 remanufacturing organizations should be different for the disassembly of mechanical products, cleaning the process of pre-planning, and the formation of programs. 5.3.3 Remanufacturing organization should have in the dismantling, cleaning process to avoid damage to the remanufacturing of blank guarantee measures. 5.3.4 Remanufacturing organizations shall establish inspection methods and inspection procedures for the dismantling of old parts to distinguish between direct use parts, remanufactured parts and abandoned parts. 5.4 Remanufacturing process quality management requirements 5.4.1 Remanufacturing organizations should have the appropriate remanufacturing equipment, capabilities and testing methods. 5.4.2 Remanufacturing Organizations shall have the relevant technical specifications for remanufactured products and shall be able to use relevant tools to engage in remanufacturing process design and quality Quantity design. 5.4.3 Remanufacturing organizations in the process of product design and quality design process, the relevant departments should be organized to review the design to To ensure the feasibility of the design. 5.4.4 Remanufacturing Organization The remanufacturing process (process) design, forming process (process) changes should be confirmed by testing to ensure that The quality characteristics of the manufactured products meet the requirements. 5.4.5 Remanufacturing organizations in the remanufacturing process should carry out process control, and according to the different process targets to establish key quality control Point system. 5.4.6 Remanufacturing organizations should arrange their production plans rationally to adopt group technology to improve the quality control of remanufacturing processes. 5.4.7 The remanufacturing organization should collect and record the quality problems appearing in the remanufacturing and processing and feedback it to the relevant departments, Audit in order to improve the design. 5.5 remanufacturing process quality management requirements 5.5.1 Remanufacturing organizations shall have the equipment and capabilities for remanufacturing an assembly. 5.5.2 Remanufacturing organizations shall record remanufactured and remanufactured parts of remanufactured products during the assembly process so as to remanufacture the quality of the organization Traceability and quality improvement. 5.5.3 The remanufacturing organization shall formulate inspection requirements for the updated parts. 5.6 remanufacturing product quality management requirements 5.6.1 Remanufacturing organization should have the main function of remanufactured products, performance testing ability. 5.6.2 Remanufacturing organizations in the control plan on the performance of remanufactured products inspection project should not be less than the requirements of new prototype requirements Routines The frequency of inspection and testing. 5.6.3 The remanufacturing organization shall take the initiative to explain to the consumer that the product is a remanufactured product and provides a quality certificate of conformity for the remanufactured product and aftermarket Quality warranty certificate. 5.7 Other requirements 5.7.1 The Remanufacturing Organization shall establish a complete product traceability body from remanufacturing the blank or replacement supplier to the final remanufactured product Department, when the product quality problems, should be able to quickly identify the reasons and take corresponding measures. 5.7.2 Remanufacturing organizations shall formulate procedures to proactively, accurately and promptly collect the quality information of remanufactured products and, based on various feedbacks Improve and improve the remanufactured product design, process development and remanufacturing capabilities, and gradually improve product quality and other indicators of reliability. 5.7.3 The remanufacturing organization shall plan the internal audit process at least once a year. The audit should include remanufactured product review, remanufactured Cheng audit (process audit) and system audit. references [1] GB/T 4863 basic terms of machinery manufacturing process [2] GB/T 28618 mechanical products remanufacturing general technical requirements [3] Xu Bin disabilities, etc. Remanufacturing and recycling economy. Beijing. Science Press,.2007 4102- T / ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31207-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 31207-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 31207-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31207-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
