GB/T 31206-2014 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31206-2014: Guideline for green design of mechanical products
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 31206-2014	259	Add to Cart	3 days	Guideline for green design of mechanical products	Valid

Similar standards

GB/T 32335   GB/T 32073   GB/T 28784.2   GB/T 31211.2   GB/T 31211.1   GB/T 31207   

Basic data

Standard ID: GB/T 31206-2014 (GB/T31206-2014)
Description (Translated English): Guideline for green design of mechanical products
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J04
Classification of International Standard: 25.010
Word Count Estimation: 11,185
Date of Issue: 9/3/2014
Date of Implementation: 5/1/2015
Quoted Standard: GB 5083; GB/T 18455; GB/T 26119-2010; GB/T 28613; GB/T 28616
Regulation (derived from): People's Republic of China Announcement of Newly Approved National Standards No. 21 of 2014
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the mechanical products (the products) green design objectives, basic principles, common technical requirements and management requirements. This standard applies to mechanical product development and design or improve the design.

GB/T 31206-2014: Guideline for green design of mechanical products

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Guideline for green design of mechanical products ICS 25.010 J04 National Standards of People's Republic of China Machinery Green Design Guidelines Issued on. 2014-09-03 2015-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the National Green Manufacturing Technology Standardization Technical Committee (SAC/TC337) and focal points. This standard was drafted. the machine Productivity Promotion Center, Tsinghua University, Chongqing University, Shunde quality and technical supervision standards and coding Codes, Wuhan University of Science and Technology, Valve Co., Ltd., Jiangsu supernatural powers. The main drafters of this standard. Xidao Yun, east, Cao Huajun, Ouyang Dan, Zhang, Sun Tingting, Zhang Yi - fang.

Introduction

Development and design stage of mechanical products depends largely on green products, the standard is intended to guide the mechanical design and product development related Member of the pre-planning and product development and design stage, to predict and identify the various stages of the product life cycle (from raw material acquisition, product design, Production, packaging, transportation, use, recycling, final disposal, etc.) of resources, environment, health and safety factors, to meet the product requirements Under the premise of green products to enhance the mechanical properties. This standard specifies the basic principles of mechanical products and general requirements for green design, detailed design and does not include the specific design requirements of green products. Machinery Green Design Guidelines

1 Scope

This standard specifies the mechanical products (referred to as the product) green design objectives, basic principles, common technical requirements and management requirements. This standard applies to mechanical product development and design or improve the design.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 5083 production equipment with safety and health General GB/T 18455 Packaging Recycling Marks GB/T 26119-2010 green manufacturing machinery product life cycle assessment - General GB/T 28613 Mechanical Products Green Manufacturing Process Planning Guide GB/T 28616 green manufacturing mechanical properties of the product

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Green Design greendesign In the whole process of design and product life cycle, take full account of the quality and cost of the product development cycle, due to the optimization of the relevant design Pigment, so the product life cycle resource consumption, small overall negative impact on the ecological environment and human health and safety-oriented design and development activity. NOTE. rewrite GB/T 28612-2012, the definition of 3.1.1. 3.2 Lifecycle lifecycle Mechanical products obtained from raw materials to product design, production, packaging, transportation, use, recycling and eventual disposal of the whole process. [GB/T 26119-2010, Definition 3.1] 3.3 Life cycle assessment lifecycleassessment; LCA Product lifecycle mechanical system input, output and the compilation and evaluation of potential environmental impacts. [GB/T 26119-2010, 3.2 Definition] 3.4 Energy efficiency energyefficiency Energy output, products, services or performance, the ratio or other relationship between the number of input energy. Such as. conversion efficiency, energy demand/real energy Efficient use of the occasion, the efficiency of input/output, the theoretical amount of energy to run/actual amount of energy to run. Note. The inputs and outputs are required on the quantity and quality of detail, and can be measured. [GB/T 23331-2012, the definition 3.8] ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 31206-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 31206-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 31206-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 31206-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.