GB/T 31185-2014 English PDFUS$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 31185-2014: Technical requirements of tubular goods manufacturing consulting service for oil and gas pipeline project Status: Valid
Basic dataStandard ID: GB/T 31185-2014 (GB/T31185-2014)Description (Translated English): Technical requirements of tubular goods manufacturing consulting service for oil and gas pipeline project Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A20 Classification of International Standard: 03.080.99 Word Count Estimation: 12,131 Date of Issue: 9/3/2014 Date of Implementation: 10/1/2014 Quoted Standard: GB/T 26429-2010 Regulation (derived from): People's Republic of China Announcement of Newly Approved National Standards No. 21 of 2014 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the oil and gas pipeline projects related to basic standards of manufacturing quality equipment with pipes supervision. This Standard is applicable to oil and gas pipeline project with steel pipes, pipe, pipe fittings and pipe corr GB/T 31185-2014: Technical requirements of tubular goods manufacturing consulting service for oil and gas pipeline project---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Technical requirements of tubular goods manufacturing consulting service for oil and gas pipeline project ICS 03.080.99 A20 National Standards of People's Republic of China Oil and gas pipeline engineering Pipe Manufacturing Supervision of the technical requirements Issued on. 2014-09-03 2014-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the National Advisory Standardization Technical Committee under supervision (SAC/TC423) and focal points. This standard was drafted. China Petroleum Technology Research Institute, CNPC pipe project, the Beijing Science and Technology Co., Ltd. Longsheng Tyco OCTG. The main drafters of this standard. Yang Zhao specifically, Maqiu Rong, Lee Kee Branch, Wang Gaofeng, Li Yunlong, Wang Chang, Li Wei, high Jianzhong, Wu Jinhui, TECHNIQUE OF PRACTICAL Huang Lei. Oil and gas pipeline engineering Pipe Manufacturing Supervision of the technical requirements1 ScopeThis standard specifies the basic technical requirements of oil and gas pipeline engineering pipe manufacturing quality-related equipment supervision. This standard applies to oil and gas pipeline projects with steel pipes, pipe fittings and pipe corrosion polyethylene manufacturing supervision.2 Normative referencesThe following documents for the application of this document is essential. For cited documents with dates, only the dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document. GB/T 26429-2010 Equipment Project Management Regulation3 Terms and DefinitionsGB/T 26429-2010 and as defined in the following terms and definitions apply to this document. 3.1 Manufacturing supervision manufacturingconsultingservice The firm should accept the commission principal, according to the contract of specialized equipment manufacturing process supervision and management services. 3.2 Witness testimony Equipment supervision personnel files, records, entities, processes and other physical activities to observe, examine, record, confirmation testimony activities. [GB/T 26429-2010, the definition 3.13] 3.3 File witness point recordpoint R point Engineer by the device of the relevant files on your device works, records or reports, witness and supervision preset control point. [GB/T 26429-2010, the definition 3.14] 3.4 Witness point witnesspoint W Point By the supervising engineer for process equipment, process, or result of node equipment construction site witness previously set supervision control points. [GB/T 26429-2010, the definition 3.15] 3.5 Stop witness point holdpoint H point Before witnessed by the device into the Engineer and signed off after the next process step or node preset Supervision control point. [GB/T 26429-2010, the definition 3.16] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31185-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 31185-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 31185-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31185-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
