GB/T 31077-2014 English PDFUS$509.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 31077-2014: Technical requirement of reservoir earthquake monitoring Status: Valid
Basic dataStandard ID: GB/T 31077-2014 (GB/T31077-2014)Description (Translated English): Technical requirement of reservoir earthquake monitoring Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: P15 Classification of International Standard: 91.120.25 Word Count Estimation: 22,259 Date of Issue: 12/12/2014 Date of Implementation: 6/1/2015 Quoted Standard: GB/T 19531.1-2004; GB 21075-2007; GB 50011; GB 50057-2010; GB 50174-2008; GB 50223-2008; GB 50343-2012; DB/T 2; DB/T 7; DB/T 8; DB/T 17-2006; DB/T 19; DB/T 20 Regulation (derived from): National Standards Bulletin 2014 No. 30 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the requirements and reservoir seismic network construction, operation and data output requirements to carry out seismic reservoir monitoring. This Standard applies to earthquake monitoring. GB/T 31077-2014: Technical requirement of reservoir earthquake monitoring---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Technical requirement of reservoir earthquake monitoring ICS 91.120.25 P15 National Standards of People's Republic of China Earthquake monitoring technology requirements Issued on. 2014-12-22 2015-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 earthquake monitoring requirements 2 5 reservoir seismic network building requirements 3 6 Reservoir Seismic Network run 9 Output 7 Reservoir Seismic Network 10 Appendix A (normative) reservoir seismic network monitoring capability of 12 Appendix B (normative) reservoir affected zone of seismic activity level assessment 13 Annex C (informative) reservoir seismic monitoring crustal deformation monitoring 15 Annex D (informative) reservoir seismic monitoring of underground fluid monitoring 16 References 17ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Seismological Bureau. This standard by the National Standardization Technical Committee earthquake (SAC/TC225) centralized. This standard was drafted. Institute of Earthquake Prediction, China Earthquake Administration, Crustal Movement Monitoring Research Center, China Seismological Bureau of Geological Research The Shandong Seismological Bureau, China Earthquake Networks Center, China Earthquake Emergency Rescue Center. The main drafters of this standard. Xue Bing, Zhao Cuiping, Wushu Gui, Martin Alintuck, Lin Rong light, Jianghai Kun, Wang Qin Cai, Hua Wei, Song Yanyun peace.IntroductionExisting earthquake monitoring instruments have seismic observations, surface free field strong motion, crustal deformation observation, and other underground fluid observation. Measurement Earthquake strong motion observation and direct observation of seismic activity and strong ground shaking effect, crustal deformation observation and underground fluid observation is mainly used for monitoring Reservoir crustal deformation conditions, the reservoir fault deformation, the spread of groundwater seepage and the like caused by impoundment, to help analyze the reservoir area Seismic activity impoundment relationship. Reservoir earthquake monitoring is an important means to ensure the safety of reservoirs, in order to strengthen the earthquake disaster reduction, protection of water conservancy and hydropower project construction and security Management, and regulate the work of earthquake monitoring standard is formulated. Earthquake monitoring technology requirements1 ScopeThis standard specifies the requirements and reservoir seismic network construction, operation and data output requirements to carry out seismic reservoir monitoring. This standard applies to earthquake monitoring.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 19531.1-2004 seismic observation stations Environmental technical requirements - Part 1. Seismic GB 21075-2007 reservoir induced earthquake hazard assessment GB 50011 Seismic Design of Buildings GB 50057-2010 Lightning in design GB 50174-2008 electronic information system room design specifications GB 50223-2008 standard classification of seismic construction engineering GB 50343-2012 building electronic information system lightning protection technical specifications DB/T 2 seismic waveform data interchange format DB/T 7 seismic stations construction specifications gravity stations DB/T 8 seismic stations construction specifications topographic change station DB/T 17-2006 seismic station construction specifications strong motion stations DB/T 19 seismic stations construction specifications GPS continuous observation stations DB/T 20 seismic stations underground construction norms fluid station3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Reservoir Seismic Network seismologicalnetworkforreservoir-inducedearthquake Monitoring of reservoir induced seismic network earthquake. [GB/T 18207.2-2005, the definition 5.2.6] 3.2 Reservoir area reservoirarea Normally, the reservoir submerged range. [GB 21075-2007, the definition 3.3] 3.3 Reservoir affected zone reservoirinfluencedarea Range Reservoir area and the extension of 10km. [GB 21075-2007, the definition 3.4] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31077-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 31077-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 31077-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31077-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |