GB/T 31064-2014 English PDFUS$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 31064-2014: Rubber-or plastics-coated fabrics -- Determination of puncture resistance Status: Valid
Basic dataStandard ID: GB/T 31064-2014 (GB/T31064-2014)Description (Translated English): Rubber-or plastics-coated fabrics -- Determination of puncture resistance Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G42 Classification of International Standard: 59.080.40 Word Count Estimation: 6,620 Date of Issue: 12/12/2014 Date of Implementation: 6/1/2015 Quoted Standard: GB/T 24133 Regulation (derived from): National Standards Bulletin 2014 No. 30 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the rubber or plastic coated fabrics puncture resistance method. This standard applies to single-sided or double-sided coating of rubber or plastic coated fabrics. GB/T 31064-2014: Rubber-or plastics-coated fabrics -- Determination of puncture resistance---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Rubber-or plastics-coated fabrics - Determination of puncture resistance ICS 59.080.40 G42 National Standards of People's Republic of China Rubber or plastic coated fabrics puncture resistance test method Issued on. 2014-12-22 2015-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Rubber and rubber products coated products Standardization Technical Committee Technical Committee (SAC/TC35/SC10) Centralized. This standard was drafted. People's Liberation Army General Logistics Oil Institute, Kaidi Northwest Rubber Co., Ltd., Shenyang Rubber Rubber Group Institute of glue. The main drafters of this standard. Yang Jianxiong, Wang Chao, Xujun Xia, Fu Baoqiang, Li Sa. Rubber or plastic coated fabrics puncture resistance test method Warning. Use of this standard should be familiar with normal laboratory procedures. This standard does not purport relates to the use of this standard may occur All security issues. Develop appropriate safety and health system and to ensure compliance with national regulations is the responsibility of the user.1 ScopeThis standard specifies the rubber or plastic coated fabrics puncture resistance method. This standard applies to single-sided or double-sided coating of rubber or plastic coated fabrics.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 24133 Rubber or plastic coated fabrics - Standard conditioning and testing environment3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Puncture resistance punctureresistance Coated fabrics resistant to external sharp objects thorn (tie) penetration ability. 3.2 Thorn cone piercinginstrument Testing coated fabrics for puncture resistance, shape like flared flathead screwdriver special tools. Principle 4 The use of cone thorn pierced by a constant vertical velocity round specimen holder on the ring fixture, and coated fabrics pierce record the force required.5 device5.1 constant rate tensile testing machine Constant rate tensile testing machine shall be equipped with read and record the sample piercing means force value applied. Applying a force value should be allowed in a tensile tester Xu 15% to 85% of the load. Tester shall Class B Force measurement accuracy. 5.2 cone thorn Cone by barbed steel production, the minimum hardness of 60HRC. Thorn cone size and structure shown in Figure 1. Cone stab each use or at least 500 times a year, the application of optical microscopy. When the sample could easily lead to the loss cone thorn, inspection frequency should be increased ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31064-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 31064-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 31064-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31064-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
