GB/T 31052.10-2016 English PDFUS$459.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 31052.10-2016: Lifting appliances -- Code of inspection and maintenance -- Part 10: Series lifting equipment Status: Valid
Basic dataStandard ID: GB/T 31052.10-2016 (GB/T31052.10-2016)Description (Translated English): Lifting appliances -- Code of inspection and maintenance -- Part 10: Series lifting equipment Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J80 Classification of International Standard: 53.020.99 Word Count Estimation: 23,224 Date of Issue: 2016-02-24 Date of Implementation: 2016-09-01 Regulation (derived from): National Standard Announcement No Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 31052.10-2016: Lifting appliances -- Code of inspection and maintenance -- Part 10: Series lifting equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Lifting appliances - Code of inspection and maintenance - Part 10. Series lifting equipment ICS 53.020.99 J80 National Standards of People's Republic of China Crane inspection and maintenance procedures Part 10. small light lifting equipment Issued on. 2016-02-24 2016-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released CONTENTSIntroduction Ⅲ ... 1 Scope 1 ... 2 Normative references 1 ... 3 Terms and definitions ... 4 General requirements 1 ... 5 Check 1 ... 6 Maintenance 2 ... 7 Inspection and maintenance of the safety precautions 2 ... Appendix A (normative) daily and periodic inspection programs, methods, content and requirements ... 3 Appendix B (normative) special inspection items, methods, content and requirements ... 13 Annex C (informative) Inspection Report 15 ... Annex D (informative) Maintenance Record 16 ... References 17 ...ForewordGB/T 31052 "crane inspection and maintenance procedures" is divided into 12 sections. --- Part 1. General; --- Part 2. Mobile cranes; --- Part 3. Tower cranes; --- Part 4. jib cranes; --- Part 5. Bridge and gantry crane; --- Part 6. cable cranes; --- Part 7. Mast Crane; --- Part 8. Railway Crane; --- Part 9. Lifts; --- Part 10. small light lifting equipment; --- Part 11. Mechanical parking equipment; --- Part 12. floating crane. This section GB/T Part of 1,031,052. This section drafted in accordance with GB/T 1.1-2009 given rules. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee crane (SAC/TC227) centralized. This section is responsible for drafting unit. Beijing Materials Handling Design and Research Institute, the National lifting the transport machinery for Quality Supervision and Inspection Center. This section participated in the drafting unit. China Electric Power Research Institute, Konecranes (Shanghai) Co., Demag Cranes & Components (Shanghai) Co., Ltd., Nanjing Hoisting Machinery Plant Co., Weihua Group Co., Ltd., Jiangyin Kai Shing crane Co., Ltd., Zhejiang double Bird Machinery Co., Ltd., Jiangxi hoisting Machinery Plant, Tianjin lifting equipment Co., Beijing dual Thai Pneumatic Equipment Co., Ltd. Nanjing next Mechanical Engineering, Henan Power Partners Ltd.. The main drafters of this section. Chenrui Ming, Zhao Chunhui, Wang Shunting, Miao Qian shall be mine, Xie Wei, Wang Lee, Sun Mingyao, Hu Gang, Zhang Ji Jun, Liu Xiaosheng, Yan Xu Qiang, Zhou Wenchuan, money-Myers Squibb, Hou Dong-hong. Crane inspection and maintenance procedures Part 10. small light lifting equipment1 ScopeGB/T 31052 provisions of this part of the basic requirements of the inspection and maintenance of the small light lifting equipment in use should be carried out. This section applies to GB/T 31052.1-2014 specified in Appendix A small light lifting equipment (hereinafter referred to as "equipment").2 Normative referencesThe following documents for the application of this document is essential. For cited documents with dates, only the dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document. GB/T 5972 crane wire rope maintenance, maintenance, installation, examination and discard GB 6067.1-2010 crane safety regulations - Part 1. General GB/T 10051.2 lifting hook - Part 2. Forged hook technical conditions GB/T 10051.3 lifting hooks - Part 3. Forged hook in check GB/T 31052.1-2014 crane inspection and maintenance procedures - Part 1. General3 Terms and DefinitionsTerms and definitions GB/T 31052.1 defined apply to this document.4 General requirementsInspection and maintenance of general requirements should be consistent with the provisions of GB/T 31052.1-2014 in Chapter 4.5 Check5.1 Daily Inspection Shall determine the daily inspection items and inspection requirements according to the specific characteristics of each device, and should not be less than the specified in Appendix A of. 5.2 Periodic inspection Depending on the characteristics of the equipment to determine the periodic inspection period is monthly inspection, quarterly inspection and annual inspection. According to the working level of each piece of equipment, the working environment and the use of periodic checks to determine the status of the project, inspection requirements and inspection cycle, and should not be less than the specified in Appendix A of. Lifting equipment for the molten metal and other dangerous goods, should be appropriate to shorten the examination period. 5.3 Special inspection 5.3.1 In the event of GB/T cases specified in 5.3.1 31052.1-2014 special inspection should be carried out. ...... |
