GB/T 30691-2014 English PDFUS$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 30691-2014: Conveyor belts -- Test atmospheres and conditioning periods Status: Valid
Basic dataStandard ID: GB/T 30691-2014 (GB/T30691-2014)Description (Translated English): Conveyor belts -- Test atmospheres and conditioning periods Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G42 Classification of International Standard: 53.040.20 Word Count Estimation: 8,867 Date of Issue: 12/12/2014 Date of Implementation: 10/1/2015 Quoted Standard: ISO 21183-1 Adopted Standard: ISO 18573-2012, IDT Regulation (derived from): National Standards Bulletin 2014 No. 30 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies all types of conveyor belts used for conditioning and testing temperature, humidity and time, without regard to its cover layer material is rubber or plastic. It also provides a conveyor belt made from a sample to be tested shall c GB/T 30691-2014: Conveyor belts -- Test atmospheres and conditioning periods---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Conveyor belts. Test atmospheres and conditioning periods ICS 53.040.20 G42 National Standards of People's Republic of China Conveyor test environment and conditioning time (ISO 18573.2012, IDT) Issued on. 2014-12-22 2015-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses the translation method identical with ISO 18573.2012 "conveyor belt test environment and conditioning time" (in English). Correspondence between the consistency of the standards of international documents and normative references of the following documents. HG/T 4601.1-2014 Light conveyor belts - Part 1. Basic properties and applications (ISO 21183-1.2005, IDT). This standard made the following editorial changes. --- "This International Standard" be replaced by "this standard"; --- Delete international standards foreword. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee pulley and the belt conveyor Technical Committee (SAC/TC428/SC1) centralized. This standard is drafted by. Zhejiang Double Arrow Rubber Co., Ltd., Zhejiang Sanwei Rubber Products Co., Ltd., Anhui favorite gum With a limited liability company, Shandong Bronte Industrial Co., Ltd. Qingdao Shinkansen technology consulting, Qingdao University of Science and Technology, Qingdao Branch of new materials Technology Industrial Park Development Co., Ltd., Qingdao Branch Rubber Technology Services Ltd. Dah Sing. Drafters of this standard. people will Shen, Zhang Fang, Song Changjiang, Yuan sea of \u200b\u200bbooks, Xin Yong record, Liu Li, Lvgui Qin Zhuang Jian Ping.IntroductionGenerally considered the state of conditioning before testing is very important, but not necessarily all in some trials. Its purpose is to test the open Beginning a regular basis, to exclude unnecessary variables, to test the accuracy of the optimum increase. In order to achieve this, some of the variables that standardization is very necessary. In addition to steel cord conveyor belt, fabric conveyor belt all contain ingredients. They are highly hydrophobic or somewhat hydrophilic. similar , The polymer layer or a cover layer having a thermoplastic or susceptible to thermal aging. Any of these factors are likely to have a significant characteristic of the conveyor belt influences. When you want to determine the status and adjust if necessary to select the most appropriate state, these factors should be taken into account. This standard preparation phase Segment has been considered given the provisions of ISO 139 [1], ISO 23529 [2] and ISO 2231 [3]. Conveyor test environment and conditioning time1 ScopeThis standard specifies all types of conveyor belts used for conditioning and testing temperature, humidity and time, regardless of its cover layer material is rubber Rubber or plastic. It also provides for the belt made from a sample to be tested shall comply with the requirements of the time interval. This standard does not include special conditions for a particular test or material or simulate specific climate.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 21183-1 Light conveyor belts - Part 1. Basic performance and application (Lightconveyorbelts-Part 1. Principal characteristicsandapplications)3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Standard environment standardatmosphere Sample conditioning and testing of the specified temperature and humidity. Note. See chapter 5. 3.2 Standard state standardcondition Standard environment, the conveyor belt when the sample reached equilibrium state. 3.3 Water balance moistureequilibrium When the belt sample was exposed to free movement in the air, there is no significant change in the quality of state achieved. 3.4 Conditioning conditioning In order to improve the reproducibility of the test results, the sample should be placed in a specified period of time prior to testing under standard environment. 3.5 Thermal equilibrium thermalequilibrium At uniform temperature conditions, conveyor sample temperature and the ambient temperature at various points within 1 ℃ difference between the state achieved.4 PretreatmentIf the belt fabric ingredient is a highly hygroscopic material or test methods are difference of moisture content of the sample is highly sensitive Sex, then the moisture from drying surface hysteresis curve to get the water balance method is very desirable. This should not by relative humidity At 10% and the temperature at 60 ℃ ~ 70 ℃ environment between the sample pretreatment to obtain. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30691-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 30691-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 30691-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30691-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
