GB/T 3048.2-2007 English PDFUS$549.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3048.2-2007: Test methods for electrical properties of electric cables and wires -- Part 2: Test of electrical resistivity of metallic materials Status: Valid GB/T 3048.2: Historical versions
Basic dataStandard ID: GB/T 3048.2-2007 (GB/T3048.2-2007)Description (Translated English): Test methods for electrical properties of electric cables and wires -- Part 2: Test of electrical resistivity of metallic materials Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K13 Classification of International Standard: 29.060 Word Count Estimation: 21,220 Date of Issue: 2007-12-03 Date of Implementation: 2008-05-01 Older Standard (superseded by this standard): GB/T 3048.2-1994 Quoted Standard: GB/T 1214; GB/T 1216; GB/T 3048.1 Adopted Standard: IEC 60468-1974, MOD Regulation (derived from): Announcement of Newly Approved National Standards No. 12 of 2007 (total 112) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies test the resistivity of the metal material terms and definitions, test equipment, Specimen preparation, test procedures, test results and calculations and test records. The test method specified in this section apply to the determination of a solid (non- twisted) of copper, aluminum and its alloy material and a metallic conductor resistance material quality and volume resistivity resistivity, and the measurement of solid metallic conductor material (uniform cross-sectional area) of the unit length resistor. The method provided in this section under standard conditions for the determination of resistivity (0. 01 ~ 2. 0) �� �� mm ^ 2/m (�̦� �� m) within the solid (non- twisted) the reference resistivity test and conventional test methods. This part should GB/T 3048. 1 together. GB/T 3048.2-2007: Test methods for electrical properties of electric cables and wires -- Part 2: Test of electrical resistivity of metallic materials---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Test methods for electrical properties of electric cables and wires Part 2. Test of electrical resistivity of metallic materials ICS 29.060 K13 National Standards of People's Republic of China Replacing GB/T 3048.2-1994 Electrical wire and cable performance test method Part 2. Metal resistivity test (IEC 60468. 1974, Methodofmeasurementofresistivity ofmetalicmaterials, MOD) Posted 2007-12-03 2008-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions Test equipment 2 4 5 Sample Preparation 3 6 Test Procedure 3 Test results and calculations 6 7 8 7 Test Record Appendix A (informative) of this section with IEC 60468. 1974 Chapter, Article 8 control number Annex B (informative) characteristics of copper and aluminum at 20 ℃ 10 Annex C (informative) Temperature Calibration 11 Annex D (informative) Error Analysis 12 D. 1 Resistance, resistivity and resistance per unit length Error Analysis 12 D. 2 cross-section measurement error analysis 13 References 15ForewordGB/T 3048 "electrical wire and cable performance test method" is divided into 14 parts. --- Part 1. General; --- Part 2. Test resistivity of metal materials; --- Part 3. Semi-conductive rubber material volume resistivity test; --- Part 4. DC resistance of conductors; --- Part 5. Insulation resistance test; --- Part 7. Tracking resistance test; --- Part 8. AC voltage test; --- Part 9. spark test of insulated cores; --- Part 10. extruded jacket spark test; --- Part 11. dielectric loss tangent test; --- Part 12. Partial discharge test; --- Part 13. impulse voltage test; --- Part 14. DC voltage test; --- Part 16. Surface resistance test. This section GB/T 3048 Part 2. The partial modification of the use of IEC 60468. 1974 "Methods of measurement of resistivity of metallic materials" (in English). This part of the structure in line with GB/T 1.1-2000 "Standardization Guide Part 1. Standard structure and drafting of the rules," and with GB/T 3048 coordinated with other parts. This section lists the reg number and IEC 60468 in Appendix A. 1974 Number of reg According to the list. Taking into account the actual needs of the development of technology to detect and measure, in using IEC 60468. 1974 when this part has made several changes related Technical differences have been incorporated into the body and they are involved in the provision of the margin of a single vertical line identification; these technical differences are as follows. --- According to the standard structure GB/T 1.1-2000 principles and provisions of the GB/T 3048 other parts of the harmonization of this section by Added Chapter 2, "Normative references" and Chapter 4, "test equipment"; --- IEC 60468. 1974 are listed in Table 1, in addition to the parameters measuring range of tolerance, the relevant part of the standard provisions also repeat Statements, which have been integrated in this section, in order to reduce unnecessary duplication; --- Added 3.5 "Wheatstone bridge" and 3.6 "Kelvin Bridge" in Part 3 of this chapter, "Terms and definitions" in order to in this section 6.2.1 Resistance Measurement "two-point" and "four point" corresponds; --- Increase in Chapter 4, "test equipment" to improve the resistance, length, mass, temperature measuring instruments and equipment. Also Supplemented with 4.1 "as the instrument other than the electricity bridge", mainly for the high-precision digital inclusion widely used in recent years, DC resistance tester; --- 5.5 to supplement standard "reference test" in the handling of the samples prepared in this section Chapter 5, "Sample Preparation"; --- This section IEC 60468. 1974, respectively, expressed in Chapter 6, "a reference to" and Chapter 7, "conventional methods" chapters merger A chapter, that this part of Chapter 6, "Test Procedure." This section uniformly in Chapter 6 of these were made two test methods Regulations; --- Taking into account the actual operating conditions and the development of new technology tests, the following changes were made in this section. 1) Due to the current temperature control technology improves, 6.1.2 and 6.1.3 of this part of the IEC 60468. 1974 as specified in points Do the (15 to 25) "reference test" ℃ and (10 ~ 35) ℃ and the "routine testing" the test specimen temperature control range to do a more Big changes were changed (20 ± 0.1) ℃ and (20 ± 5) ℃, making it closer to the standard temperature of 20 ℃; 2) This section supplements 6.4.1.1 and 6.4.1.2, given a simple cross-section of the sample cross-sectional area is calculated, and provides for taking "π" Value of significant digits; Temperature coefficient of resistance is much smaller parameters in the formula may not be relevant will "γ" included. Compared to 1974,. with IEC 60468 Clear "γ" negligible, this applies to all related calculations, and with sufficient accuracy. For ease of use, the IEC 60468. 1974, this section also made the following editorial changes. "." --- With a decimal point instead of a comma as the decimal point, ""; --- Deleted international standards foreword; --- Increase the informative appendix A guide to use. This Part replaces GB/T 3048.2-1994 "electrical wire and cable performance test methods for metallic conductor resistivity test." this time Amended in accordance with GB/T 1.1-2000 this section have been adjusted. Section compared with the GB/T 3048.2-1994 The main changes are as follows. --- Standard Chinese name to "wire and cable electrical performance test methods - Part 2. Metal resistivity test"; --- Standard English name to "Testmethodsforelectricalpropertiesofelectriccablesandwires- Part 2. Testofelectricalresistivityofmetalicmaterials "; --- Overall structure and layout of this section according to GB/T 1.1-2000 modified. 1) Chapter 1 of "Range" (1994 edition Chapter 1; Chapter 1 of this edition); 2) Chapter 2 is "normative references" (1994 edition, Chapter 2; edition Chapter 2); 3) Chapter 3 as "Terms and Definitions" (1994 edition Chapter 3; Chapter 3 of this edition); 4) Chapter 4, to "test equipment" (1994 edition, Chapter 4; Chapter 4 of this edition); 5) Chapter 5 is "Sample Preparation" (1994 edition Chapter 5; Chapter 5 of this edition); 6) Chapter 6 is "Test Program" (1994 edition, Chapter 6; Chapter 6 of this edition); 7) Chapter 7 is "the test results and calculations" (1994 edition, Chapter 7; edition Chapter 7); 8) Chapter 8 of "test records" (1994 edition, Chapter 8; Chapter 8 of this edition); --- In Chapter 1, "scope" to modify the scope of this section, the "arbitration test" and "routine test" to "benchmark test" and "Routine testing" (1994 edition Chapter 1; Chapter 1 of this edition); --- In Chapter 3, "Terms and definitions" by GB/T 2900.4 "Electrical Electrical Alloy term" editorial changes and supplements Entry DC Bridge (1994 Edition Chapter 3; edition Chapter 3, 3.5, 3.6); --- In Chapter 4, "test equipment" carried out the necessary integration (1994 edition 4.1,5.2.2; this edition 6.2.2,4.2); --- In Chapter 5, "Sample Preparation" in the merged sample "shape" and "characteristics" are requirements, a uniform comprehensive regulations, And added a special mode of preparation of the sample (1994 edition Chapter 5; edition, Chapter 5, 5.5); --- The following modifications were made in Chapter 6, "Test Program". 1) is no longer on the "routine tests" do individual requirements, and the "reference test" Merge unified comprehensive regulations (1994 edition Excerpts of chapter 6); Chapter 6; 2) supplemented with simple cross section conductor cross-sectional area of the sample is calculated (1994 edition no; this edition 6.4.1.2,6.4.1.3); 3) the temperature of the sample made more stringent rules (1994 edition 6.2.1,6.9.1; this edition 6.1.2,6.1.3); --- In Chapter 7, "Experimental Results and Calculation" confirmation under the provisions of this part of the test temperature, the formula for calculating the temperature coefficient of linear expansion "Γ" negligible with sufficient accuracy (1994 Version 7.3; 7.1 edition); --- In Chapter 8, "trial record" to modify some of the requirements, delete the words "test report" was, for the standardized "test records" (1994 edition, Chapter 8, 8.2; edition Chapter 8, 8.2). This section of the Appendix A, Appendix B, Appendix C and Appendix D is an informative annex. This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee of wire and cable. This section is drafted. Shanghai Electric Cable Research Institute. The main drafters of this section. Wan Shuter, Xiakai Rong, Yuzhen Ming, Shen Jianhua. This part of the standard replaces the previous editions as. GB 3048.2-1983, GB/T 3048.2-1994. Electrical wire and cable performance test method Part 2. Metal resistivity test1 ScopeGB/T 3048 provisions of this part of the resistivity of metal materials testing terms and definitions, test equipment, specimen preparation, test procedures, Test results and calculations and test records. Test methods specified in this part apply to the determination of solid (non-stranded) the volume of copper, aluminum and metal alloy conductor material and resistance material Mass resistivity and resistivity, and the measurement of the solid metal conductor materials (uniform cross-sectional area) the resistance per unit length. The method provided in this section is measured under standard conditions resistivity (0.01 to 2.0) in the Ω · mm2/m (μΩ · m) wide solid (Non-twisted) benchmark test and a conventional test methods for material resistivity. This section should be used in conjunction with the GB/T 3048.1.2 Normative referencesThe following documents contain provisions which, through reference to GB/T 3048 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 1214 vernier caliper GB/T 1216 outside micrometer (neq ISO 3611) GB/T 3048.1 wire and cable electrical performance test methods - Part 1. General3 Terms and DefinitionsThe following terms and definitions apply GB/T 3048 this part. 3.1 Per unit length, unit cross-sectional area of the resistance of the conductor, the volume resistivity at normal temperature of the conductor (1) calculated using the formula. Where. 3.2 Per unit length, the conductor resistance per unit mass, the mass of the conductor resistivity standard temperature using equation (2). (2) Where. 2); ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3048.2-2007_English be delivered?Answer: Upon your order, we will start to translate GB/T 3048.2-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3048.2-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3048.2-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 3048.2-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3048.2-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
