GB/T 304.1-2017 PDF EnglishUS$150.00 · In stock · Download in 9 seconds
GB/T 304.1-2017: Spherical plain bearings - Classification Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 304.1: Historical versions
Similar standardsGB/T 304.1-2017: Spherical plain bearings - Classification---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT304.1-2017GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 21.100.10 J 11 GB/T 304.1-2017 Replacing GB/T 304.1-2002 Spherical plain bearings - Classification Issued on: NOVEMBER 1, 2017 Implemented on: MAY 1, 2018 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; China National Standardization Administration. Table of ContentsForeword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Terms and definitions ... 5 4 Structure type classification of spherical plain bearings ... 5 5 Structure types of spherical plain bearings ... 8ForewordGB/T 304 “Spherical plain bearings” is divided into four parts. -- GB/T 304.1 Spherical plain bearings - Classification; -- GB/T 304.2 Spherical plain bearings- Identification code; -- GB/T 304.3 Spherical plain bearings - Fits; -- GB/T 304.9 Spherical plain bearings - General technical regulations. This part is the first part of GB/T 304. This part was drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB/T 304.1-2002 "Spherical plain bearings - Classification". Compared with GB/T304.1-2002, the main technical changes are as follows. -- Refine the classification of rod-end spherical plain bearings (see 4.3); -- Add the classification of combining form of friction auxiliary materials on sliding surfaces (see 4.5); -- Add the classification of units indicated by size and tolerance (see 4.6); -- Integrate the description of commonly-used structure and structural characteristics of part of maintenance-lubrication-type spherical plain bearings; add commonly-used maintenance-lubrication-type bearing structures, such as SIBJ•••-type, SABJ•••-type, SGFW(SGFEW)•••ES-type, SFW(SFEW)•••ES-type, SIRN•••ES-type, SIGW(SIGEW)•••ES-type, SIQ•••ES-type, SIA•••ES-type ; revise part of structure diagram (see Table 1, Table 1 of 2002 version); -- Delete the following bearing structure types, such as GE•••F2-type, GE•••FSA-type, GE•••F1H-type, GEEW•••ET, GEEW•••ET-2RS-type (see Table 2 of 2002 version); -- Integrate the description of commonly-used structure and structural characteristics of part of maintenance-free self-lubricating spherical plain bearings; add commonly-used maintenance-free self-lubricating bearing structures, such as GEM (GEEM)•••ET-2RS, GE•••HT-type, SIBJ•••C-type, SABJ•••C-type; revise part of structure diagram (see Table 2, Table 2 of 2002 version); Spherical plain bearings - Classification1 ScopeThis part of GB/T 304 specifies the classification method of spherical plain bearings and the structure type of commonly-used spherical plain bearings. This part applies to the classification management of spherical plain bearing products.2 Normative referencesThe following documents are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all amendments) applies to this document. GB/T 3944 Spherical plain bearings - Vocabulary3 Terms and definitionsThe terms and definitions defined in GB/T 3944 apply to this document.4 Structure type classification of spherical plainbearings 4.1 According to the difference of load direction or nominal contact angle, the spherical plain bearings can be divided into. a) Radial bearing - It is the spherical plain bearing which is mainly used to bear radial load. The nominal contact angle is 0°≤ τ ≤30°. According to the different nominal contact angles, they can be divided into. 1) Radial contact spherical plain bearing - It is the spherical plain bearing with nominal contact angle τ = 0°. It is suitable to bear radial load, at the same time it can bear axial load in any direction; 2) Angular contact radial spherical plain bearing - It is the spherical plain bearing with nominal contact angle 0°< τ ≤30°. It is suitable to bear the combination of radial load and axial load acting simultaneously. -- Internal thread rod-end spherical plain bearing. the rod-end shank is internal thread straight rod; -- External thread rod-end spherical plain bearing. the rod-end shank is external thread straight rod; -- Rod-end joints equipped with welded seat. the rod-end shank is flange seat, square seat or cylindrical seat with positioning pin, which is fixed to the end of the rod by welding; -- Rod-end spherical plain bearing equipped with locking seat. the internal thread of the rod-end shank is grooved and equipped with locking device. 4.4 According to whether it needs re-lubrication and maintenance when it is working, spherical plain bearings can be divided into. a) Maintenance-lubrication-type spherical plain bearing; b) Maintenance-free self-lubricating spherical plain bearing. 4.5 According to the combination mode of friction auxiliary materials on sliding surface, spherical plain bearings can be divided into. a) Steel/steel spherical plain bearing; b) Steel/copper alloy spherical plain bearing; c) Steel/PTFE compound spherical plain bearing; d) Steel/PTFE fabric spherical plain bearing; e) Steel/reinforced plastic spherical plain bearing; f) Steel/zinc-based alloy spherical plain bearing. 4.6 According to the representation unit of dimension and tolerance unit, spherical plain bearings can be divided into. a) Metric system (meter) spherical plain bearing; b) English system (inch) spherical plain bearing. 4.7 According to the direction of bearing load, nominal contact angle and structure type, spherical plain bearings can be divided into. a) Radial spherical plain bearing; b) Angular contact spherical plain bearing; sealed on both sides). GE•••ESN-type radial spherical plain bearing Radial load and a certain axial load in any direction (When axial load is borne by stopper ring, the bearing capacity shall take into account the factors of stopper ring.) Single-slit outer ring; there is one or two stopper grooves on the outer ring; there are lubrication grooves and lubrication holes. GE•••XS-type radial spherical plain bearing GE•••XS-2RS-type radial spherical plain bearing Radial load and a certain axial load in any direction Double-slit outer ring; there is one or two locking ring grooves on the outer ring; there are lubrication grooves and lubrication holes;(-2RS is sealed on both sides). GE•••HS-type radial spherical plain bearing GE•••HS-2RS-type radial spherical plain bearing Two-half outer ring can be locked tightly by screw; there are lubrication grooves and lubrication holes on inner ring; after wear, clearance can be adjusted; (-2RS is sealed on both sides). GE•••DE1-type radial spherical plain bearing The inner ring is hardened bearing steel; the outer ring is unhardened bearing steel, which is extruded into shape when it is assembled with the inner ring; there are lubrication grooves and lubrication holes. For the bearing whose inner diameter is less than 25mm, there is no lubrication groove and lubrication hole. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 304.1-2017 be delivered?Answer: The full copy PDF of English version of GB/T 304.1-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 304.1-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 304.1-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 304.1-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 304.1-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 304.1-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 304.1-2017?A step-by-step guide to download PDF of GB/T 304.1-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 304.1-2017". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
