GB/T 30200-2023 English PDF

US$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30200-2023: Test method for energy consumption of rubber and plastics injection moulding machines
Status: Valid

GB/T 30200: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 30200-2023	299	Add to Cart	3 days	Test method for energy consumption of rubber and plastics injection moulding machines	Valid
GB/T 30200-2013	399	Add to Cart	3 days	Test method for energy consumption of rubber and plastics injection moulding machines	Obsolete

Similar standards

GB/T 45132   GB/T 25156   GB/T 32662   GB/T 32456   

Basic data

Standard ID: GB/T 30200-2023 (GB/T30200-2023)
Description (Translated English): Test method for energy consumption of rubber and plastics injection moulding machines
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G95
Classification of International Standard: 71.120, 83.200
Word Count Estimation: 15,145
Date of Issue: 2023-09-07
Date of Implementation: 2024-04-01
Older Standard (superseded by this standard): GB/T 30200-2013
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 30200-2023: Test method for energy consumption of rubber and plastics injection moulding machines

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 71.120;83.200 CCSG95 National Standards of People's Republic of China Replace GB/T 30200-2013 Energy consumption detection method of rubber plastic injection molding machine Published on 2023-09-07 2024-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document replaces GB/T 30200-2013 "Method for Energy Consumption Testing of Rubber Plastic Injection Molding Machines" and is consistent with GB/T 30200-2013 In addition to structural adjustments and editorial changes, the main technical changes are as follows. ---Changed the applicable limits of the scope (see Chapter 1, Chapter 1 of the.2013 edition); ---Change the term "whole machine power consumption" to "whole machine energy consumption" (see 3.1,.2013 version of 3.1), delete the term "average power consumption" "Consumption" (see 3.3 of the.2013 edition), adding the terms and definitions of "standby state" and "standby power" (see 3.3 and 3.4); ---Changed the "detection range" (see Chapter 4, 4.2.11 and 4.2.12 of the.2013 version); ---Deleted reading and recording measurement data (see 4.3.4~4.3.6 of the.2013 version); ---Added content related to pre-test preparation (see 5.4.3 and 5.4.5); ---Changed the test parameters of the rubber injection molding machine (see Table 1, Table 1 of the.2013 version); ---Changed the test parameters of the plastic injection molding machine (see Table 2, Table 2 of the.2013 version); ---Added standby power measurement method (see 5.5.7); --- Added energy consumption measurement methods related to products (see 5.6 and Appendix B); ---Changed the energy consumption level and energy saving evaluation value (see Appendix C, Appendix B of the.2013 version). Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Rubber and Plastic Machinery Standardization Technical Committee (SAC/TC71). This document was drafted by. Haitian Plastic Machinery Group Co., Ltd., Yuyao Huatai Rubber and Plastic Machinery Co., Ltd., Guangdong Yizumi Precision Injection Technology Co., Ltd., Guangdong Lijin Plastic Machinery Manufacturing Co., Ltd., Terry Machinery Co., Ltd., Donghua Machinery Co., Ltd., Guangdong Jiaming Machinery Co., Ltd., Ningbo Haixing Machinery Manufacturing Co., Ltd., Ningbo Haixiong Plastic Machinery Co., Ltd., Chenxiong Machinery (Shenzhen) Co., Ltd., Ningbo City Haida Plastic Machinery Co., Ltd., Ningbo Huamida Machinery Manufacturing Co., Ltd., Aberg Machinery (Pinghu) Co., Ltd., Hangzhou Dayu Machinery Co., Ltd. Co., Ltd., Fuqiangxin (Ningbo) Machinery Manufacturing Co., Ltd., Bole Intelligent Equipment Co., Ltd., Ningbo Lijin Plastic Machine Intelligent Manufacturing Co., Ltd., De Qingshenda Machinery Manufacturing Co., Ltd., Shandong Tongjia Intelligent Equipment Co., Ltd., Ningbo Fighter Hydraulic Co., Ltd., Zhejiang Xuchangsheng Equipment Technology Co., Ltd., Ningbo Lisong Injection Molding Technology Co., Ltd., Beijing Rubber Industry Research and Design Institute Co., Ltd., Dalian Plastic Machinery Research Institute, National Plastic Machinery Product Quality Supervision and Inspection Center. The main drafters of this document. Gao Shiquan, Wang Naiying, Wang Shengwang, Li Qing, Liu Yingying, Wei Jianhong, Yan Houming, Fang Lai, Chen Kaiding, Zhang Weidong, Pang Pengbo, Wang Hangjun, Wang Zhouting, Zhang Shaoliang, Wu Yuhua, Lu Lifeng, Deng Junjun, Yu Bo, Ye Ruqing, Dai Qiang, Jiang Yingfeng, Wang Xu, Xu Feng, He Cheng, Wang Gengxin, Sun Ning, Ma Xiaogang, Ding Xingya. The previous versions of this document and the documents it replaces are as follows. ---First published as GB/T 30200-2013 in.2013; ---This is the first revision. Energy consumption detection method of rubber plastic injection molding machine

1 Scope

This document describes the detection and evaluation methods of energy consumption (specific energy consumption and standby power) of rubber plastic injection molding machines. This document is applicable to single-screw plunger type, single-injection unit rubber injection molding machines with hot plate electric heating and single-injection unit, single-screw Rod (or single-screw plunger type), electrically heated barrel, thermoplastic injection molding machine that can process polypropylene (PP) pellets (hereinafter referred to as "injection molding machine") Molding machine") energy consumption detection. Other injection molding machines can refer to this document for implementation.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 3102.5 Electrical and magnetic quantities and units GB/T 25156-2020 General technical requirements and testing methods for rubber and plastic injection molding machines GB/T 36587 Rubber and plastic machinery terminology

3 Terms and definitions

The following terms and definitions as defined in GB/T 3102.5 and GB/T 36587 apply to this document. 3.1 The energy consumption of the complete machine corresponding to the active power measured according to the method in Chapter 5. Note 1.The unit is kilowatt hour (kW·h). Note 2.See Figure 1 for the power triangle. Index symbol description. φ---Phase difference angle. Figure 1 Power triangle 3.2 The overall energy consumption of the injection molding machine per unit of injection mass. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30200-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30200-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30200-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30200-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 30200-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 30200-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.