GB/T 30104.101-2025 English PDFUS$1074.00 ยท In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 30104.101-2025: Digital addressable lighting interface - Part 101: General requirements - System components Status: Valid GB/T 30104.101: Historical versions
Basic dataStandard ID: GB/T 30104.101-2025 (GB/T30104.101-2025)Description (Translated English): Digital addressable lighting interface - Part 101: General requirements - System components Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K74 Classification of International Standard: 29.140.50 Word Count Estimation: 54,518 Date of Issue: 2025-08-01 Date of Implementation: 2026-02-01 Older Standard (superseded by this standard): GB/T 30104.101-2021 Issuing agency(ies): State Administration for Market Regulation, Standardization Administration of China GB/T 30104.101-2025: Digital addressable lighting interface - Part 101: General requirements - System components---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT30104.101-2025 ICS 29.140.50 CCSK74 National Standard of the People's Republic of China Replaces GB/T 30104.101-2021 Digital Addressable Lighting Interface Part 101.General requirements for system components System components (IEC 62386-101.2022, IDT) Released on August 1, 2025 Implementation on February 1, 2026 State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 General Requirements 6 5 Electrical Specifications 15 6 Bus power 18 7 Transmission Protocol Framework 22 8 Time Series 23 9 Operation Method 28 10 Variable Declaration 34 11 Instruction Definition 34 Appendix A (Informative) Background Information on the System 35 Appendix B (Informative) Contact Current 46 Reference 47 Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 101 of GB/T 30104 Digital Addressable Lighting Interface. GB/T 30104 has been published in the following parts. --- Part 101.General requirements for system components; --- Part 102.General requirements for control devices; --- Part 103.General requirements for control equipment; --- Part 104.General requirements for wireless and other wired system components; --- Part.201.Particular requirements for control gear for fluorescent lamps (equipment type 0); --- Part 202.Particular requirements for control devices Self-contained emergency lighting (equipment type 1); --- Part 203.Particular requirements for control gear for discharge lamps (other than fluorescent lamps) (equipment type 2); --- Part 204.Particular requirements for control gear for low-pressure tungsten halogen lamps (equipment type 3); --- Part 205.Particular requirements for control gear for incandescent lamp supply voltage controllers (equipment type 4); --- Part 206.Particular requirements for control devices converting digital signals into DC voltage (equipment type 5); --- Part 207.Particular requirements for control gear LED modules (equipment type 6); --- Part 208.Particular requirements for control devices switching functions (equipment type 7); --- Part 209.Particular requirements for control devices Color control (equipment type 8); --- Part 220.Particular requirements for control devices - Central power supply emergency operation (equipment type 19); --- Part 222.Particular requirements for control gear heat lamp protection (equipment type 21); --- Part 301.Special requirements for input device buttons; --- Part 302.Special requirements for input devices, absolute input devices; --- Part 303.Special requirements for input device occupancy sensors; --- Part 304.Special requirements for input devices light sensors. This document replaces GB/T 30104.101-2021 "Digital addressable lighting interface Part 101.General requirements system components". Compared with GB/T 30104.101-2021, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The scope of the document has been changed (see Chapter 1, Chapter 1 of the 2021 edition); b) The electrical safety and bus grounding sections have been modified (see 4.9, 4.10, 4.9, 4.10 of the 2021 edition); c) The usage of bus power and external power supply has been changed (see 4.11, Chapter 6, 4.11, Chapter 6 of the 2021 edition); d) Increased polarity sensitivity of bus units containing bus power supplies (see 5.1); e) Deleted 32-bit frames. (See 7.4.4 of the 2021 edition.) This document is equivalent to IEC 62386-101.2022 "Digital addressable lighting interfaces - Part 101.General requirements - System components". Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Light Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Lighting Appliances (SAC/TC224). This document was drafted by. Zhejiang Jingri Technology Co., Ltd., Huarong Lighting Co., Ltd., Wenzhou University, Zhongshan Huayi Lighting Co., Ltd., National Electric Light Source Quality Supervision and Inspection Center (Beijing), Wuxi Anteyuan Technology Co., Ltd., Beijing Electric Light Source Research Ltd. The main drafters of this document are. Shen Jie, Li Miaohua, Wang Pengjun, Zhang Jintuo, Wang Chong, Hu Sen, and Yang Zhiwei. The previous versions of this document and the documents it replaces are as follows. ---First published as GB/T 30104.101-2013 in.2013, first revised in 2021; ---This is the second revision.introductionGB/T 30104 (all parts) specifies a bus system for controlling electronic lighting equipment through digital signals, which is intended to consist of the following Partial composition. Part 103 specifies the general requirements for control devices. Part 104 specifies the general requirements for control equipment. General requirements for wireless and alternative wired system components. Part 105 specifies general requirements for firmware upgrades. Part 150 The requirements for auxiliary power supplies are given. Auxiliary power supplies can be independent or built into the control device or control equipment. Particular requirements for controlgear for certain types of luminaires. Special requirements for each type of input device. GB/T 30104 is published as a series of standards divided into several parts to facilitate future revision and amendment, and to add new parts when necessary. Other requirements. The structure and relationship of the series of standards are shown in Figure 1 as follows. Figure 1 Overview of GB/T 30104 Other sections also include additional requirements. Unless otherwise specified, all numbers used in this document are decimal. Hexadecimal numbers are given in the format 0xVV. The "x" in the number means "any value". Digital Addressable Lighting Interface Part 101.General requirements for system components1 ScopeThis document specifies the system's electrical specifications, bus power supply, transmission protocol framework structure, timing, operation methods, variable declarations and instructions definition. This document applies to components in bus systems controlled by digital signals from electronic lighting equipment. Control methods, algorithms and data exchange methods for application controllers used for lighting control are outside the scope of this document. (EMC) requirements are outside the scope of this document.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 12113-2023 Measurement of touch current and protective conductor current (IEC 60990.2016, IDT) GB/T 19510.1-2023 Light source controlgear Part 1.General requirements and safety requirements (IEC 61347-1.2017, MOD) Note. There is no technical difference between the referenced content of GB/T 19510.1-2023 and the referenced content of IEC 61347-1.2015/AMD1.2017. IEC 60664-1 Insulation coordination for equipment within low-voltage supply systems Part 1.Principles, requirements and tests Note. GB/T 16935.1-2023 Insulation coordination for equipment within low-voltage power supply systems Part 1.Principles, requirements and tests (IEC 60664-1.2020, IDT) IEC 61000-4-11 Electromagnetic compatibility (EMC) Part 4-11.Testing and measurement techniques for input current per phase less than or equal to Note. GB/T 17626.11-2023 Electromagnetic compatibility (EMC) Part 4-11.Test and measurement techniques for input current per phase less than or equal to 16A Equipment immunity test for voltage dips, short interruptions and voltage variations (IEC 61000-4-11, MOD) IEC 61643-11 Low-voltage surge protective devices Part 11.Performance requirements and tests for surge protective devices connected to low-voltage power supply systems Note. GB/T 18802.11-2020 Low voltage surge protective devices (SPD) Part 11.Performance requirements and test methods for surge protective devices for low voltage power supply systems Method (IEC 61643-11.2011, MOD) IEC 62386-102 Digital addressable lighting interface Part 102.General requirements for control gear Note. GB/T 30104.102-2025 Digital Addressable Lighting Interface Part 102.General Requirements Control Gear (IEC 62386-102.2022, IDT) IEC 62386-103 Digital addressable lighting interface Part 103.General requirements Control equipment (Digitaladdressable ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30104.101-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 30104.101-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 30104.101-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30104.101-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 30104.101-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 30104.101-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
