GB/T 29906-2013 English PDFUS$649.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 29906-2013: External thermal insulation composite systems based on expanded polystyrene Status: Valid
Basic dataStandard ID: GB/T 29906-2013 (GB/T29906-2013)Description (Translated English): External thermal insulation composite systems based on expanded polystyrene Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q25 Classification of International Standard: 91.100.60 Word Count Estimation: 28,258 Quoted Standard: GB/T 308; GB/T 3810.2-2006; GB/T 3810.3-2006; GB/T 3810.12-2006; GB/T 6342; GB/T 7689.5-2001; GB/T 8170-2008; GB 8624-2012; GB/T 9914.3-2001; GB/T 10801.1; GB/T 17146-1997; GB/T 17671; GB/T 20102-2006; GB 50178-1993; JC/T 547-2005; JC/T 1004-2006; JGJ 110 Adopted Standard: EOTA ETAG 004; NEQ; EN 13163; NEQ; ICC-ES AC219; NEQ; ASTM C578-2005; NEQ; ASTM E2430-2005; NEQ; EN 13494; NEQ; EN 13496-2002; NEQ; EN 13497; NEQ; ASTM E96-1995; NEQ; ASTM E2134; NEQ; ASTM D2794-1993; NEQ; EIMA 101.86; NEQ Regulation (derived from): National Standards Bulletin 2013 No. 23 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies: molded polystyrene plastered exterior insulation system materials Terminology and definitions, general provisions, requirements, test methods, inspection rules, product certification and the use of brochures, packaging, transporta GB/T 29906-2013: External thermal insulation composite systems based on expanded polystyrene---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.External thermal insulation composite systems based on expanded polystyrene ICS 91.100.60 Q25 National Standards of People's Republic of China Molded polystyrene board thin plaster exterior insulation system materials Issued on. 2013-11-27 2014-08-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions General provisions 2 4 5 requires 3 6 Test methods 6 7 Inspection rules 13 8 product certification and instructions 14 9 packaging, transportation and storage 14 Appendix A (informative) brick veneer molded polystyrene board thin plaster exterior insulation system materials 16 Mortar cracking strain Test methods Appendix B (normative) wipe 21 Annex C (normative) fiberglass mesh alkali resistance rapid test method 23ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard was drafted in JG149-2003 "expanded polystyrene board thin plaster exterior insulation system" basis. This standard JG149- The main technical changes compared to 2003 are as follows. After --- increased resistance to weathering and freeze-thaw test, the molded polystyrene board thin plaster exterior insulation system tensile bond strength testing Requirements (see 5.1, JG149-2003 5.1); --- Molded polystyrene board increased combustion performance requirements of the class, according to the different thermal conductivity of the molded polystyrene board is divided into two levels (See 5.3); --- Add or modify some of the technical performance of the system composition of the material, such as. anchor performance requirements (see 4.7), anti-mortar Plastering Impact performance testing requirements (see 5.4) and the like; --- Modify the part of the test methods (see Chapter 6, JG149-2003 Chapter 6); --- Modify some of the terms, to further standardize the text, make the text more rigorous, concise, consistent with the standard terminology, and with the relevant standard Associate coordination (see Chapter 3); --- Remove the classification and labeling (see Chapter 4 of JG149-2003); --- Remove the testing requirements of the molded polystyrene board thin plaster exterior insulation system wind pressure value (see 5.1, JG149-2003 5.1). The standard reference method using redrafted EOTAETAG004 "There wipe the surface layer of the composite EIFS European Technical Approval mark Associate ", EN13163" building insulation products - factory production of molded polystyrene (EPS) product standards ", ICCESAC219" Exterior Acceptance criteria for insulation and finish systems ", ASTMC578-05" Styrofoam insulation with a hard ", ASTM2430-2005" outside Insulation and finish systems with polystyrene foam (FPS) ", EN13494" building insulation products - adhesive mortar and plaster and insulation materials Determination of the tensile bond strength between ", EN13496.2002" Building insulation products - Determination of the mechanical properties of glass fiber mesh of " EN13497 "Building insulation products - Exterior insulation composite system impact Determination", ASTM96-1995 "material water vapor Standard Test Method for Permeability ", ASTME2134" external insulation and finish systems tensile bond strength test method ", ASTMD2794- 93 "organic coating resistance to rapid deformation test methods (impact)" and EIMA101.86 "Exterior Insulation and Finish Systems resistance to rapid deformation impact test standard Test methods ", the degree of consistency with these standards is non-equivalent. The standard proposed by the Ministry of Housing and Urban-Rural Development of the People's Republic of China. This standard by the Housing Ministry of Construction Standardization Technical Committee, components and products with the urban and rural areas. This standard was drafted. China Building Standard Design and Research Institute, designed Witt (China) Systems Limited, China Academy of Building Research, in State Building Materials Test and Certification Center, built in the Beijing Academy of Building Research Co., Ltd., Beijing live in total Group Co., Ltd., Housing and City Rural Ministry of Construction Technology and Industrialization Development Center, Shanghai Sto Ltd., Shandong Qin Heng Technology Co., Ltd., located in Nanjing Fiberglass Research Design Institute, Fischer (Taicang) Co., Ltd. Building Anchors, Beijing-profit high-tech Co., Akzo Nobel Specialty Chemicals (Shanghai) Co., The company, on the Hai Fuka Building Materials Co., the Department of Xiangfan Erjie glass fiber limited liability company, Special Arts Building Materials Science and Technology Industry (Suzhou) Co., Ltd. Beijing New Building Materials Co., Ltd. dedicated, Beijing Kobos Decoration Engineering Co., Ltd., Shanghai Yong Cheng Building Creative Ltd., SIGMA Caron Ivy (Shanghai) Co., Ltd., Owens Corning (China) Investment Co., Ltd., Jiangsu Li Shide Chemical Shuangliang Group Co. Division, Beijing Huajin Hao Environmental Protection Technology Co., Ltd., BASF (China) Co., Ltd. Langfang Nippon Paint Co., Ltd., Shanghai Caoyang construction adhesive Agent Factory, happy to paint (Shanghai) Co., Ltd., Beijing Plains hi-tech Co., Wattens (Beijing) Co., Ltd. insulation coating, China Aerospace Institute of Architectural Design (Group), Shanghai wall-Energy Materials Co., Doumen District of Zhuhai City Rising Sun Ceramics Co., Ltd., Jinjiang Tengda Ceramics Co., Ltd., Tianjin Yu God energy-saving insulation materials Co., Ltd. Nanjing allies energy-saving materials. The main drafters of this standard. Li Xiaoming, Gutai Chang, Feng Jinqiu, Wang Xinmin, fees Huihui, Qian Xuan Qing, Wei Yang West, Zhuangwei Mu Haoming, Zhang Biru, Bing, Luo Zheer, Wang Yumei, quaternary its wide, Zhao Lin, HUANG Zhen-li, Shi Shulan, Lv Dapeng, Wang Weihong, Yang Xingming, Lin Yimin, Zhang Yinxiang, Jiang Aiguo, Gao Hong, Yun Tao tube, Wangcong Hui, Miao Xiaojie, Lei Yong, Shuai, Li Hanming, Deng Wei, Ren Fei, Sun Chui sea, Yu Li Yun, Wang Yuzhi, Wu Guangxian, Lin Kai Sen, Huangying Ming, Huang Shou-Bao, Shen Xing, Wang Qiaochun. Molded polystyrene board thin plaster exterior insulation system materials1 ScopeThis standard specifies the terms and definitions molded polystyrene board thin plaster exterior insulation system materials, general provisions, requirements, test methods, inspection Inspection rules, product certification and instructions for use, packaging, transport and storage. This standard applies to the molded polystyrene board thin plaster exterior insulation system materials used in civil construction.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 308 Rolling Ball GB/T 3810.2-2006 Test methods of ceramic tiles - Part 2. Dimensions and surface quality inspection GB/T 3810.3-2006 Test methods of ceramic tiles - Part 3. water absorption, apparent porosity, apparent relative density and bulk density Determine GB/T 3810.12-2006 Test methods of ceramic tiles Part 12. Determination of frost resistance GB/T 6342 Determination of linear dimensions of foam rubber GB/T 7689.5-2001 Reinforcements method for woven fabrics Part 5. Glass fiber tensile breaking strength and elongation at break Length measurement GB/T 8170-2008 revised value represents about rules and limit values \u200b\u200band judgment GB 8624-2012 Classification for burning behavior of building materials and products GB/T 9914.3-2001 Test methods of enhancing Part 3. Determination of mass per unit area (idt ISO 3374.2000) GB/T 10801.1 molded polystyrene foam for thermal insulation GB/T 17146-1997 water vapor permeability test method of building materials GB/T 17671 cement mortar strength test method (ISO method) GB/T 20102-2006 fiberglass mesh alkali resistance test method for sodium hydroxide solution immersion GB 50178-1993 Building Climate zoning standards JC/T 547-2005 Ceramic Tile Adhesive JC/T 1004-2006 Ceramic Tile grouts JGJ110 decorative brick construction bond strength test JGJ126 exterior wall construction and acceptance of decorative tile works JGJ144 exterior insulation Technical specification JG/T 366 with external insulation anchor3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Molded polystyrene board thin plaster exterior insulation system externalthermalinsulationcompositesystemsbasedonex- pandedpolystyrene Placed on the outside of buildings facades, with fixed primary wall insulation system bonding manner. System consists of a molded polystyrene board, adhesives, thick ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29906-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 29906-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 29906-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29906-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
