GB/T 29905-2013 English PDF

US$149.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29905-2013: Laboratory method of determining the leachability of wood preservatives
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 29905-2013	149	Add to Cart	3 days	Laboratory method of determining the leachability of wood preservatives	Valid

Similar standards

GB/T 28995   LY/T 1635   LY/T 1636   GB/T 29901   GB/T 29902   GB/T 29900   

Basic data

Standard ID: GB/T 29905-2013 (GB/T29905-2013)
Description (Translated English): Laboratory method of determining the leachability of wood preservatives
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: B71
Classification of International Standard: 79.010
Word Count Estimation: 4,438
Quoted Standard: GB/T 14019; GB/T 23229
Regulation (derived from): National Standards Bulletin No. 22 of 2013
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies: wood preservatives turnover rate laboratory test methods. This standard applies to: all kinds of wood preservatives churn rate analysis.

GB/T 29905-2013: Laboratory method of determining the leachability of wood preservatives

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Laboratory method of determining the leachability of wood preservatives ICS 79-010 B71 National Standards of People's Republic of China Test methods for wood preservatives wastage Issued on. 2013-11-12 2014-04-11 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard was proposed by the State Forestry Administration. This standard by the National Standardization Technical Committee timber (SAC/TC41) centralized. This standard was drafted. China Forestry Science Institute of Wood Industry. The main drafters of this standard. Jiang Mingliang, Li Zhiqiang. Test methods for wood preservatives wastage

1 Scope

This standard specifies the wood preservatives turnover laboratory test methods. This standard applies to all kinds of analysis of wood preservatives turnover rate.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 14019 wood preservative term GB/T 23229-type water-borne wood preservatives Analysis

3 Terms and Definitions

Terms and definitions GB/T 14019 apply to this document defined. 4 Prepare, embalmed and sample loss method Sample preparation 4.1 4.1.1 Sample choice of species Select Masson Pine (Pinusmassoniana) or slash pine (P.elliottii) species, according to need and select specific species should note Ming brief sample species origin and site conditions. 4.1.2 Sample Preparation It should be treated without chemicals healthy specimen, defect-free sapwood. Sample size. 20mm × 20mm × 20mm, the test Kind of ring width moderate, end of about four to six rings, between the sample density deviation does not exceed 15%. 4.2 embalmed 4.2.1 anti-corrosion treatment Each test preservatives choose to use two to four concentrations, the concentration of the test should be based on the target drug load may be, to give two to four drug the amount. Specimen before corrosion treatment should be individually numbered, dried and weighed. Samples under vacuum (-0.08MPa ~ -0.085MPa) into condition Row embalmed, processing time is 20min, the sample reached substantially saturated absorption liquid, remove the sample when using filter paper to gently wipe the surface of the liquid-free Weighing, for calculating the amount of the drug. Air-dry the sample to below 19% moisture content and stored at 20 ℃ ~ 28 ℃ environment. 4.2.2 Calculation of the total sample of wood preservative analyte mass Wood preservatives total mass of the sample under test component (m) according to equation (1). m = c × mG × 1000 (1) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 29905-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 29905-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 29905-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 29905-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.