GB/T 29863-2023 English PDF

US$419.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29863-2023: Pattern-making
Status: Valid

GB/T 29863: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 29863-2023	419	Add to Cart	4 days	Pattern-making	Valid
GB/T 29863-2013	759	Add to Cart	4 days	Pattern-making	Obsolete

Similar standards

GB/T 23317   GB/T 22705   GB/T 22702   GB/T 45068.2   GB/T 31907   

Basic data

Standard ID: GB/T 29863-2023 (GB/T29863-2023)
Description (Translated English): Pattern-making
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y75
Classification of International Standard: 61.020
Word Count Estimation: 22,264
Date of Issue: 2023-08-06
Date of Implementation: 2024-03-01
Older Standard (superseded by this standard): GB/T 29863-2013
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 29863-2023: Pattern-making

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 61.020 CCSY75 National Standards of People's Republic of China Replace GB/T 29863-2013 Garment drawing Published on 2023-08-06 2024-03-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document replaces GB/T 29863-2013 "Garment Drawing". Compared with GB/T 29863-2013, except for structural adjustments and editorial changes, In addition, the main technical changes are as follows. a) Changed the requirements for drawing scale (see 4.2, 3.4 of the.2013 version); b) Changed the legend of graphs and drawing methods, added the graph uses of "thick dotted line" and "thin dotted line", "dash-dotted line" and "dash-dotted line" Merged into dotted and dashed lines, deleted double dotted and dashed lines, changed the requirements for line width (see 4.4, 3.5 of the.2013 version); c) Added requirements for labeling units (see 5.1.2); d) The basic rules for marking dimension values and drawing marking content have been changed, and illustrations have been deleted (see 5.1.4, 5.1.5,.2013 version) 4.1, 4.2.2, Figure 7); e) Changed the "straight distance" and "horizontal distance" labeling methods to "linear labeling", changed the "slant distance" to "polyline labeling", and changed Corresponding legend (see 5.2, 5.4,.2013 version 4.2.3, 4.3); f) Added "arc dimension", "equal division dimension" and "angle dimension" labeling rules and corresponding legends (see 5.3, 5.5, 5.6); g) The "special seam placement", "forward" and "strip installation position" drawing symbols are deleted (see Table 4 of the.2013 version); h) Changed the "overlap", "one-way fold", "inverted fold", "meridian", "stop", "open dart", "folded dart", "separate dart" and " The symbol forms of the drafting symbols of “stop”, “gather”, “pull apart”, “stretch”, “shrink”, “flat buttonhole” and “button” (see Table 3,.2013 edition Table 3); i) Changed "condensation" to "shirring", and changed the symbol form and description (see Table 3,.2013 version of Table 3); j) Changed the names of the “equivalent sign”, “open dart”, “folded dart”, “separated dart” and “counterpoint mark” drafting symbols (see Table 3,.2013 Table 3 of the annual edition); k) Changed the "Equal Bisector", "Equal Number", "Right Angle", "Overlap", "Split", "Open Dart", "One-way Pleating", "Folded Dart" and "Separated Dart" "Tao", "stopping mouth", "lining", "stretching", "shrinking", "flat buttonhole", "button", "counterpoint mark", "snap button" and "hook button". Ming (see Table 3, Table 3 of the.2013 version); l) The drawing format, layout and font requirements have been changed and incorporated into the informative appendix (see Appendix A, 3.2, 3.3 and 3.6 of the.2013 version); m) Added types of codes for main parts of clothing drawings (see Table D.1); n) Change "back width" to "back width/back width", change "bottom collar height" to "bottom collar width", change "back of neck point" to "back of neck point", "chest point" is changed to "chest height/chest point", "upper crotch (upper crotch) length" is changed to "upper crotch length/upper crotch length", "front chest width" is changed to "chest "Width/front chest width", "elbow line" is changed to "sleeve elbow line", "front neck point" is changed to "front neck point", "crotch length" is changed to "inseam length/crotch" "Bottom length" and "Knee line" are changed to "Knee circumference line/middle crotch line", "Horizontal shoulder width" is changed to "Shoulder width/Total shoulder width", and "Neck and shoulder point" is changed to "Side neck point" and "shoulder end point" are changed to "shoulder point/acromion point" (see Table D.1, Table B.1 of the.2013 version); o) Changed the codes of the main parts of the clothing drawing. "Sleeve Mountain", "Bust", "Back Width/Back Width", "Sleeve Fat", "Back Center Line", "Bottom Collar Width" and "Back Clothing length" "Bust line" "Chest width/front chest width" "Cuffs" "Front center line" "Head circumference" "Shoulder width/total shoulder width" "Foot opening" "Lower bust line" "Turn over The English name of "collar width" (see Table D.1, Table B.1 of the.2013 version); p) Changed the codes of the main parts of the clothing drawing. "Sleeve Mountain", "Bust", "Back Width/Back Width", "Sleeve Fat", "Back Center Line" and "Bottom Collar Width" Code names for "back length", "bust line", "chest width/front chest width", "cuffs", "sleeve elbow line", "front center line", "head circumference", "foot opening", and "lapel width" (See Table D.1, Table B.1 of the.2013 version); q) “Upper bust line” is deleted (see Table D.1, Table B.1 of the.2013 version); r) Added "abdominal circumference", "crotch line", "ankle line", "underbust circumference", "abdominal circumference", "thigh circumference", "elbow circumference/sleeve elbow circumference", "pant length", "skirt length" and "back" The names and codes of "long", "hip length", "sleeve mountain high", "front sleeve hole", "back sleeve hole", "front sleeve mountain" and "back sleeve mountain" (see Table D.1). Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by the China Textile and Apparel Industry Federation. This document is under the jurisdiction of the National Apparel Standardization Technical Committee (SAC/TC219). This document was drafted by. Donghua University, Jiangsu Hubao Group Co., Ltd., Shanghai University of Engineering and Technology, Shanghai Textile Group Testing Standards Co., Ltd., Jinjiang Standard & Poor Quality Technical Services Co., Ltd., Hengyuanxiang (Group) Co., Ltd., Heilan House Brand Management Co., Ltd., Hebei Ben Fa Garment Co., Ltd., Hangzhou Zhongfu Science and Technology Innovation Research Institute Co., Ltd., Qingdao Kute Intelligent Co., Ltd., Beijing Product Quality Supervision and Inspection Research Institute. The main drafters of this document. Zhao Hui, Zhou Shifei, Yuan Rong, Yang Xiuyue, Ma Nini, Wang Xingfang, He Aifang, Yue Chunming, Li Juan, Liu Bing, Yan Meili, Han Jun. The previous versions of this document and the documents it replaces are as follows. ---First published as GB/T 29863-2013 in.2013; ---This is the first revision. Garment drawing

1 Scope

This document specifies the requirements for garment drawing, sizing rules and garment drawing symbols. This document is applicable to clothing drawing in the process of clothing design, production, technology, teaching and trade.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 10609.3 Folding method of technical drawing reproduction drawings GB/T 14689 Technical drawing drawing format and format GB/T 14691 Technical drawing fonts GB/T 15557 Clothing terminology GB/T 16160 Dimension definitions and methods for human body measurement for clothing

3 Terms and definitions

The terms and definitions defined in GB/T 15557 apply to this document.

4 requirements

4.1 Basic requirements Drawings should comply with the provisions of GB/T 10609.3, GB/T 14689 and GB/T 14691. 4.2 Cartographic scale 4.2.1 The mapping scale classification should comply with the provisions of Table 1. Table 1 Batch description Original value ratio 1.1 Reduction ratio 1.2 1.3 1.4 1.5 1.6 1.10 Magnification ratio 1.5.1 2.1 4.2.2 Drawings on the same drawing should use the same scale, and the scale should be filled in the title block; when using different scales, each zero should be The proportion is marked on the upper left corner of the component, such as. 1.1, 1.2, etc. 4.2.3 The proportions of clothing style drawings are not restricted by the above regulations. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 29863-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 29863-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 29863-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 29863-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 29863-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 29863-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.