GB/T 29791.2-2013 English PDF

US$254.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29791.2-2013: In vitro diagnostic medical devices -- Information supplied by the manufacturer (labelling) -- Part 2: In vitro diagnostic reagents for professional use
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 29791.2-2013	254	Add to Cart	3 days	In vitro diagnostic medical devices -- Information supplied by the manufacturer (labelling) -- Part 2: In vitro diagnostic reagents for professional use	Valid

Similar standards

GB/T 29791.3   GB/T 26124   GB/T 21415   GB 19083   GB/T 29791.5   GB/T 29791.1   

Basic data

Standard ID: GB/T 29791.2-2013 (GB/T29791.2-2013)
Description (Translated English): In vitro diagnostic medical devices -- Information supplied by the manufacturer (labelling) -- Part 2: In vitro diagnostic reagents for professional use
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: C44
Classification of International Standard: 11.100
Word Count Estimation: 13,132
Quoted Standard: ISO 8601; ISO 14971; ISO 15223-1; ISO 18113-1; EN 980
Adopted Standard: ISO 18113-2-2009, IDT
Regulation (derived from): National Standards Bulletin No. 21 of 2013
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the professional use in vitro diagnostic (IVD) reagent manufacturers to provide information on request. This standard also applies to the expectations and professional calibrator in vitro diagnostic medical devices used in conjunct

GB/T 29791.2-2013: In vitro diagnostic medical devices -- Information supplied by the manufacturer (labelling) -- Part 2: In vitro diagnostic reagents for professional use

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. In vitro diagnostic medical devices Information supplied by the manufacturer (labelling) Part 2. In vitro diagnostic reagents for professional use ICS 11.100 C44 National Standards of People's Republic of China In vitro diagnostic medical devices Information supplied by the manufacturer (labeling) Part 2. In vitro diagnostic reagents for professional use Informationsuppliedbythemanufacturer (labeling) - Part 2. Invitrodiagnosticreagentsforprofessionaluse (ISO 18113-2.2009, IDT) Issued on. 2013-10-10 2014-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 29791 "in vitro diagnostic medical devices - Information supplied by the manufacturer (labeling)" is divided into five parts. --- Part 1. Terms, definitions and general requirements; --- Part 2. In vitro diagnostic reagents for professional use; --- Part 3. In vitro diagnostic instruments for professional use; --- Part 4. In vitro diagnostic reagents for self; --- Part 5. In vitro diagnostic instruments for self. This section GB/T 29791 Part 2. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses the translation method identical with ISO 18113-2.2009 "in vitro diagnostic medical device manufacturers to provide information (labeling) Part 2. In vitro diagnostic reagents for professional use. " Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB/T 7408-2005 data elements and interchange formats - Information interchange dates and times (ISO 8601.1998, IDT) --- YY/T 0316-2008 medical device risk management to medical devices applications (ISO 14971.2008, IDT) Symbols - Part 1 --- YY/T 0466.1-2009 medical equipment used with medical device labels, labeling and information provided. pass With requirements (ISO 15223-1.2007, IDT) Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This part is proposed by the State Food and Drug Administration. This part of the National Medical clinical testing laboratory and in-vitro diagnostic systems for Standardization Technical Committee (SAC/TC136) centralized. This section is drafted. Beijing Medical Device Testing. The main drafters of this section. Bi Chunlei, Zhang Xinmei.

Introduction

Professional in vitro diagnostic use (IVD) reagents supplied by the manufacturer to the user is able to use safety equipment and achieve its expected performance information. its The form and level of detail as the intended use and the country-specific regulations vary. Global Harmonization Task Force (GHTF) encourages global regulatory system for medical devices to converge. Eliminate differences between jurisdictions and regulations can be So patients earlier access to new technologies and treatments, see reference [9]. This section provides professional coordination with the labeling requirements of the IVD reagent basis. This section is concerned only with the IVD reagents for professional use is expected, calibrators and control materials information provided. This section is intended and GB/T 29791.1 used in combination, the standard contains the definition of common requirements for the information provided by the manufacturer and marked general concepts. This section based on EN375.2001 [5]. In order to comply with ISO /IEC Guide Part 2 [4], the text has been modified, but the requirements, including Enclosed in GB/T 29791.1 requirements substantially equivalent to the original harmonized European standards. This section is intended to support all GHTF participating countries, And basic labeling requirements in other countries are implementing or planning to implement IVD medical device labeling regulations. As expected for IVD reagent systems and equipment supplied by the same manufacturer used together, calibrators and (or) controlled substances, present Part is also expected to be used with the GB/T 29791.1 and GB/T 29791.3. In vitro diagnostic medical devices Information supplied by the manufacturer (labeling) Part 2. In vitro diagnostic reagents for professional use

1 Scope

This section GB/T 29791 specifies the professional use in vitro diagnostics (IVD) reagent manufacturer's information requirements. This section also applies to professional calibration was expected and in vitro diagnostic medical devices for use with controlled substance information provided by the manufacturer. This section also applies to IVD Annex. This section applies to outer and inner packaging label and instructions for use. This section does not apply to. a) in vitro diagnostic instruments or equipment; b) self-test in vitro diagnostic reagents.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 8601 Data elements and interchange formats - Information interchange the date and time notation (Dataelementsandinterchange formats-Informationinterchange-Representationofdatesandtimes) ISO 14971 Medical Device Risk Management for Medical Device Applications (Medicaldevices-Applicationofriskman- agementtomedicaldevices) Symbols - Part 1 ISO 15223-1 for medical equipment with medical device labels, labeling and information. General requirements (Medicaldevices-Symbolstobeusedwithmedicaldevicelabels, labelingandinformationtobesup- plied-Part 1. Generalrequirements) ISO 18113-1 In vitro diagnostic medical device manufacturers to provide information (labeling) - Part 1. Terms, definitions and general requirements [Invitrodiagnosticmedicaldevices-Informationsuppliedbythemanufacturer (labeling) -Part 1. Terms, definitionsandgeneralrequirements] EN980 medical devices used in the labeling symbol (Symbolsforuseinthelabelingofmedicaldevices)

3 Terms and Definitions

Terms and definitions defined in ISO 18113-1 apply to this document.

4 General

4.1 Basic requirements ISO 18113-1 apply. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 29791.2-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 29791.2-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 29791.2-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 29791.2-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.