GB/T 29770-2013 English PDFUS$329.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 29770-2013: End of life information exchange for electrical and electronic equipment between manufacturers and recyclers Status: Valid
Basic dataStandard ID: GB/T 29770-2013 (GB/T29770-2013)Description (Translated English): End of life information exchange for electrical and electronic equipment between manufacturers and recyclers Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Z04 Classification of International Standard: 01.040.13 Word Count Estimation: 14,159 Quoted Standard: IEC 62474-2012 Adopted Standard: IEC/TR 62635 DC-2011, MOD Regulation (derived from): National Standards Bulletin No. 21 of 2013 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the inter-enterprise exchange of information about recycling electrical and electronic products manufacturers format and recycling. This standard applies to all electrical and electronic products. Other related products are also av GB/T 29770-2013: End of life information exchange for electrical and electronic equipment between manufacturers and recyclers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. End of life information exchange for electrical and electronic equipment between manufacturers and recyclers ICS 01.040.13 Z04 National Standards of People's Republic of China Electrical and electronic products manufacturers and recycling Recycling information exchange between enterprises format (IEC TR62635DC.2011, Guidelinesforendoflifeinformation provisionfrommanufacturersandrecyclers, andforrecyclability ratecalculationofelectricalandelectronicequipment, MOD) Issued on. 2013-10-10 2014-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses redrafted law revision using IEC TR62635DC. Room 2011, "electrical and electronic products manufacturers and recycling companies Terms of the end of life and the utilization of renewable Computing Guide "(Guidelinesforendoflifeinformationprovisionfrom manufacturersandrecyclers, andforrecyclabilityratecalculation ofelectricaland electronic equipment) recovering the exchange of information on the format of the content between manufacturers and recycling companies. This standard and IEC TR62635DC.2011 technical differences are as follows. --- Deleted international standards in computing and the utilization of renewable-related content, including the entire contents of Chapter 1, Chapter 4 of the inner part Content, as well as the entire contents of Part 3. --- On normative references, this standard has been adjusted with a technical difference, adjust the focus reflected in Chapter 2, "Regulation Normative references ", delete the references of this standard is not 3 Normative references" ISO 22628-2002RoadVe- hicles-Recyclability and recoverability-Calculation method "," IEC PT 62542 Standardizationofenvironmentalaspects-Glossaryofterms "," IEC 62430 (2009-02) Ed.1.0 Environmentalyconsciousdesignforelectricalandelectronicproducts ". --- Modified "3.2 Waste" is defined as "discard owner, intends to discard or must discard any substance or object." By the modification As "owner no longer used and has been discarded or abandoned any substance or object" to keep up with our existing regulations and standards Association Transfer agreement. Any line --- modify the definition of "end of life treatment 3.4" by "will be transported to the waste for disposal or recycling facility after To include disassembly, materials separation and disposal "to" transport the waste to recycling facilities after any action, including demolition Unloading, material separation and recycling "in order to maintain harmony with our existing regulations and standards. --- Modified "3.6 re-use" is defined by the "use phase has ended for a product or a zero/member, was re their original purpose Use of new activities "to" Without prejudice to the relevant laws, regulations or standards under the premise of their original purpose to continue to use waste products Or zero/member yuan/device or by cleaning, maintenance after its original purpose to continue to use the act "to keep up with China's existing laws and regulations Harmonization and standards. --- Modified "3.7 recycling" is defined by the "processing of waste materials to make for initial or other purposes too Cheng, excluding energy recovery. "Was changed to" recycling of waste products, making it part of a raw material for reuse With the process, excluding energy recovery and re-use "in order to maintain harmony with our existing regulations and standards. --- Modified "3.9 renewable utilization" is defined by the "percentage of total product quality recyclable product quality accounted for." Modify As "the product can be expected to re-use and recycling part of the quality of parts and (does not include energy recovery section) and products Percentage of the total mass "in order to maintain harmony with our existing regulations and standards. --- Modify the "3.10 recycling" is defined by the "waste products and their constituent materials for re-use and recycling (material recycling) Or energy recovery process. "To" processing of waste products, so as to meet the requirements of its original use or for its He use to form a re-use, and any acts of exploitation of renewable energy recovery "in order to maintain coordination with our existing regulations and standards Consistent. --- Amend the definition of "recoverability rate 3.12" by "recyclable product quality as a percentage of total product quality." Repair To "products is expected to be partially recycled (including re-use of parts, recycling and energy recovery portion portion) of the substance The amount and percentage of the total mass of the product ", in order to maintain harmony with our existing regulations and standards. --- Amend the definition of "3.13 disposal" by "recycling than any of the processing activities, such as incineration, landfill or other permanent Storage "to" incineration, landfill or other changes in the physical, chemical and biological properties of waste methods to achieve reduction or To eliminate the dangers of their activities, or to the waste disposed in line with the final requirements for environmental protection facilities or places to live Action "in order to maintain harmony with our existing regulations and standards. --- Amend the definition of "3.15 recycling enterprise" from "waste treatment facility owned organizations" to "engage in electronic waste Electrical products recycling activities natural and legal persons, companies need to have the process in which the qualification process and have provided appropriate treatment Facilities and venues, "in order to maintain harmony with our existing regulations and standards. --- Deleted international standards "critical Glossary 1 end of life treatment" in order to maintain coordination with our existing regulations and standards Consistent. --- Increased in 6.2.2 "attach documents to prove the recovery processing enterprises qualified" to keep up with our existing regulations and standards Coordinated. This standard and IEC TR62635DC. editorial differences 2011 are as follows. --- Deleted the introductory part of the original; --- Modify the informative appendix A, an increase of "relays, sensors, switches and other electrical contacts containing cadmium", will be "greater than 10cm2 in India Printed circuit board "to" printed circuit board ", the" gas discharge lamp "to" rear gas discharge lamps and other light sources "; --- Modify the informative Appendix B, in the third table to the right to increase a "Comments (Removal procedures and tools)", the first column of the third row "Selective treatment" to increase prompt information "(including the environment and hazardous to your health information)"; --- Remove the informative Appendix C "C.1 NOTE. At the end of life process in some countries, 100% of zero/component quality should make For the recycling of reporting rather than an actual re-use part of the "; --- Remove the informative Appendix D and Appendix E. This standard by the National Standardization Technical Committee Environmental electrical and electronic products and systems (SAC/TC297) and focal points. This standard was drafted. China Quality Certification Center, Shenzhen Quality Inspection Institute of Metrology, Haier Group, Qingdao Xintiandi waste electrical and Electronic Product Recycling Ltd., China National Institute of Standardization. The main drafters of this standard. non-Luo Ming, Yao Tingting, Yu Jie, Chen Zeyong, Chen Huan, Hanqing Jie, Dongfeng high, Dong L, Ma Qiju, Yinfeng Fu. Electrical and electronic products manufacturers and recycling Recycling information exchange between enterprises format1 ScopeThis standard specifies the inter-enterprise exchange of information on recycling electronic format manufacturer of electrical products and recycling. This standard applies to all electrical and electronic products. Other related products are also available for reference. The main criteria include. --- End of the principle of the process of life; Guidelines and other relevant information before the material provided by the manufacturer --- separation requires disassembly of zero/components (location and material); --- Information about the end of life process and the end of life treatment effect provided by the recycling companies.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. IEC 62474.2012 Electrical products industry materials declaration (Materialdeclarationforproductsofthe electrotechnicalindustry)3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 End of life end-of-life (EoL) After the end of the intended use of the product life cycle stages beginning stage. 3.2 Waste waste The owner is no longer used and has been discarded or abandoned any substance or object. 3.3 Total product quality totalproductmass Into the end of life treatment process waste product quality. NOTE. The product is used to calculate the total mass of the utilization of renewable/recyclable utilization. 3.4 End of life treatment endoflifetreatment The waste is transported to recycling facilities after any acts of exploitation, including demolition, material separation and recycling. 3.5 Separating materialseparation In addition to dismantling the separation material other outside activities, including mechanical, chemical or thermal processing (such as chopped, melted and sorting, etc.). 3.6 Reuse reuse Without prejudice to the relevant laws, regulations or standards premise, according to their original purpose to continue to use waste products or zero/member, Yuan/or devices via ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29770-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 29770-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 29770-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29770-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
