GB/T 29285-2012 English PDF

US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29285-2012: Pulps -- Laboratory wet disintegration -- Disintegration of mechanical pulps
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 29285-2012	329	Add to Cart	3 days	Pulps -- Laboratory wet disintegration -- Disintegration of mechanical pulps	Valid

Similar standards

GB/T 24328.3   GB/T 27741   GB/T 31905   GB/T 45369   GB 43631   GB/T 29286   

Basic data

Standard ID: GB/T 29285-2012 (GB/T29285-2012)
Description (Translated English): Pulps -- Laboratory wet disintegration -- Disintegration of mechanical pulps
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y30
Classification of International Standard: 85.060
Word Count Estimation: 14,119
Quoted Standard: GB/T 462; GB/T 5399
Adopted Standard: ISO 5263-2-2004, MOD
Regulation (derived from): National Standards Bulletin No. 41 of 2012
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the mechanical pulp dissociation wet laboratory instruments and test procedures. This standard applies to all kinds of mechanical pulp (ie, mechanical pulp, semi- chemical pulp and CTMP).

GB/T 29285-2012: Pulps -- Laboratory wet disintegration -- Disintegration of mechanical pulps

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pulps. Laboratory wet disintegration. Disintegration of mechanical pulps ICS 85.060 Y30 National Standards of People's Republic of China Pulp Laboratory wet solution dissociated from mechanical pulp (ISO 5263-2.2004, Pulps-Laboratorywetdisintegration- Part 2. Disintegrationofmechanicalpulpsat20 ℃, ISO 5263-3.2004, Pulps-Laboratorywetdisintegration- Part 3. Disintegrationofmechanicalpulpsat≥85 ℃, MOD) Issued on. 2012-12-31 2013-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This standard uses redrafted Law Amendment uses ISO 5263-2.2004 "Pulp Laboratory wet dissociation - Part 2. mechanical pulp dissociation (20 ℃) \u200b\u200b"and ISO 5263-3.2004" Pulp Laboratory wet dissociation Part 3. mechanical pulp dissociation (≥85 ℃) ". This standard and ISO 5263-2.2004 and ISO 5263-3.2004 as compared to the main technical differences are as follows. --- On normative references, this standard has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows. ● Modify with international standards of GB/T 462 instead of ISO 287, ISO 638; ● equivalents adoption of international standards GB/T 5399 instead of ISO 4119; --- Balance scale value is adjusted to 0.1g, higher accuracy; --- Standard water is defined as distilled or deionized water or equivalent purity. This standard and ISO 5263-2.2004 and ISO 5263-3.2004, compared with more adjustment in the structure, listed in Appendix A of this standard With international standards of control clauses numbered list. The standard proposed by China National Light Industry Council. The standard paper by the National Standardization Technical Committee (SAC/TC141) centralized. This standard was drafted. China Pulp and Paper Research Institute, the national paper quality supervision and inspection center, China Paper Association Professional Committee of Standardization Members will. The main drafters of this standard. Records, left Jianbo. Pulp Laboratory wet solution dissociated from mechanical pulp

1 Scope

This standard specifies the test procedures and instrumentation laboratory wet mechanical pulp dissociation. This standard applies to all kinds of mechanical pulp (ie, mechanical pulp, semi-chemical pulp and chemi-mechanical pulp).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 462 paper, board and pulp - Determination of water sample (GB/T 462-2008, ISO 287. 1985, ISO 638. 1978, MOD) GB/T 5399 pulp slurry concentration measurement (GB/T 5399-2004, ISO 4119.1995, IDT)

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Mechanical pulp dissociation disintegrationofmechanicalpulp In the water for free in the slurry, entangled fibers mechanically treated to separate from each other, but without changing its structural properties. 3.2 Latent state latency Some properties mechanical pulp suppressed, need higher temperatures dissociation is improved, the situation is called latent state. Note 1. a latent state in the mechanical treatment process, especially under conditions of processing at high concentration after cooling, twisted fibers is formed. Presumably, by the latent state of wood Prime hardening caused. Note 2. The slurry latent state depends mainly mechanical process slurry concentration and energy consumption related. 3.3 Consumers latent latencyremoval Use mechanical treatment (ie, dissociation) and heat treatment (above the lignin softening temperature) process. NOTE. Consumers latent temperature not lower than 85 ℃.

4 Instrument

Dissociation is 4.1 4.1.1 Standard dissociation device The structure shown in Appendix B. To eliminate latent, the standard dissociation should be equipped with a power supply heating or hot water cylinder to keep the fiber - the temperature of the aqueous suspension of not less than 85 ℃. Note. Standard dissociation device checks in Appendix C. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 29285-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 29285-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 29285-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 29285-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.