GB/T 29233-2012 English PDFUS$929.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 29233-2012: Single mode optical fibre telecommunication cables for outdoor duct, directly buried, and lashed aerial application Status: Valid
Basic dataStandard ID: GB/T 29233-2012 (GB/T29233-2012)Description (Translated English): Single mode optical fibre telecommunication cables for outdoor duct, directly buried, and lashed aerial application Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: M33 Classification of International Standard: 33.180.10 Word Count Estimation: 42,453 Quoted Standard: GB/T 2951.11-2008; GB/T 6995.2; GB/T 7424.1-2003; GB/T 7424.2-2008; GB/T 7424.3-2003; GB/T 9771.1; GB/T 9771.2; GB/T 9771.3; GB/T 9771.4; GB/T 9771.5; GB/T 9771.6; GB/T 9771.7; GB/T 13993.2-2002; GB/T 13993.4-2002; GB/T 15972-10-2008; GB/T 15972-20-2008; Adopted Standard: IEC 60794-3-11-2010, MOD Regulation (derived from): National Standards Bulletin No. 41 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the pipeline, buried and non- self-supporting aerial installation with single-mode fiber optic cable communication outside the structure and materials, performance requirements, test methods, packaging, and transportation. This sta GB/T 29233-2012: Single mode optical fibre telecommunication cables for outdoor duct, directly buried, and lashed aerial application---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Singlemode optical fibre telecommunication cables for outdoor duct, directly buried, and lashed aerial application ICS 33.180.10 M33 National Standards of People's Republic of China Pipeline, buried and non-self-supporting aerial Single-mode fiber optic cable laying Outdoor Communications foroutdoorduct, directlyburied, andlashedaerialapplication (IEC 60794-3-11.2010, Opticalfibrecables-Part 3-11. Outdoorcables -Productspecificationforduct, Directlyburied, andlashedaerial single-modeopticalfibretelecommunicationcables, MOD) Issued on. 2012-12-31 2013-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Symbols and abbreviations 2 5 General 3 6 6 Structures and Materials 7 performance requirements and test methods 10 8 packaging, transportation and storage 20 9 Quality Assurance 21 Appendix A (informative) This standard and IEC 60794-3-11.2010 structure change compared to the situation 22 Annex B (informative) This standard and IEC 60794-3-11.2010 technical differences and their causes 25 Appendix C (Informative Appendix) ITU-T and IEC Guide 28 standard single-mode fiber Materials and features Appendix D (normative) single-mode fiber parameters 29 Annex E (informative) single-mode fiber compatibility guidelines 31 Design Guidelines Appendix F (informative) cable armouring is 34 Annex G (informative) cable avidin attack the protective layer of the design guidelines 36 References 38ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The revised standards adopted IEC 60794-3-11.2010 "Optical fiber cables - Part 3-11. Outdoor cables pipeline, buried and non-self-supporting frame Empty communication singlemode fiber product specification. " This standard and IEC 60794-3-11.2010, compared with more adjustment in the structure, listed in Appendix A of this standard and IEC 60794- 3-11. reg number 2010 control list. This standard and IEC 60794-3-11.2010 compared to the existence of technical differences, these differences involve provisions have been adopted in its outer margin Vertical single line blank position (|) were marked. Appendix B gives a list of corresponding technical differences and their causes. This standard also made the following editorial changes. --- For ease of use, the IEC 60794-3-11.2010 reference standard IEC /T R62000 increase this standard Annex E; --- Increase the informative appendix F "cable armouring Design Guidelines"; --- Increase the informative Appendix G "cable avidin attack the protective layer of design guidelines." Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China. The standard by the China Communications Standards Association. This standard was drafted. Datang Telecom Technology & Industry Group, Beijing Institute of Telecommunications and beneficially through Science and Technology Co., Ltd., Wuhan Posts and Telecommunications Academy of Sciences, Optical Fiber and Cable Co., Ltd. The main drafters of this standard. Chi Meng Xue, Wang Zemin, Liu Xiangrong, Guo Zhihong, SONG Zhi Tacitus, Yangya Ning, bear strong, Gao Hua. Pipeline, buried and non-self-supporting aerial Single-mode fiber optic cable laying Outdoor Communications1 ScopeThis standard specifies the pipeline, buried and non-self-supporting aerial laying structure and material of a single-mode fiber optic cable outdoor communications, performance requirements, test Methods, packaging and transportation. This standard applies to pipes, buried or aerial self-supporting manner laid using single-mode fiber optic outdoor communication.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2951.11-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 11. General test side Law --- --- Measurement of thickness and overall dimensions of mechanical tests (IEC 60811-1-1.2001, IDT) GB/T 6995.2 wire and cable identification methods - Part 2. Standard colors GB/T 7424.1-2003 total cable specification - Part 1. General (IEC 60794-1-1.2001, MOD) Basic optical cable test method. GB/T 7424.2-2008 cable Part 2 Generic specification (IEC 60794-1-2.2003, MOD) GB/T 7424.3-2003 cable Part 3. Sectional specification - Outdoor cables (IEC 60794-3.2001, MOD) GB/T 9771 (all parts) with a single-mode optical fiber communication GB/T 13993.2-2002 communications cable series Part 2. Outdoor optical fiber core network GB/T 13993.4-2002 communications cable series - Part 4. Outdoor optical fiber access networks GB/T 15972-2008 (all parts) optical fiber test methods [IEC 60793-1 (all parts)] Gases evolved during combustion of GB/T 17650.2-1998 materials from cables - Test methods - Part 2. Measurement PH value and conductivity measurement of acidity of gases (idt IEC 60754-2.1991) GB/T 17651.1-1998 Measurement of smoke density of cables burning under defined conditions - Part 1. Test apparatus (idt IEC 61034-1.1997) GB/T 17651.2-1998 of cables burning under defined conditions Measurement of smoke density - Part 2. Test procedure and requirements (Idt IEC 61034-2.1997) GB/T 18380.11-2008 and optical fiber cables under fire conditions - Test - Part 11. single insulated wire and cable fire Vertical flame spread test test equipment (IEC 60332-1-1.2004, IDT) GB/T 18380.12-2008 burning test and optical fiber cables under fire conditions - Part 12. single insulated wire and cable fire Test 1kW pre-mixed flame spread vertical flame test methods (IEC 60332-1-2.2004, IDT) GB/T 18900-2002 Test methods for polarization mode dispersion single mode fiber (ITU-TG.650.2000, NEQ) GB/T 29199-2012 rodent cable performance test methods JB/T 8137 (all parts) wire and cable delivery plate YD/T 837.2-1996 Copper polyolefin insulated aluminum sheathed local communication cable test methods - Part 2. Electrical performance experiment method YD/T 837.3-1996 Copper polyolefin insulated aluminum sheathed local communication cable test methods - Part 3. mechanical and physical Performance test method ...... |
