GB/T 29198-2012 English PDF

US$739.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29198-2012: Technical requirements of adaptation layer of No.7 signalling interworking with IP MTP2 peer-to-peer adaptation layer
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 29198-2012	739	Add to Cart	6 days	Technical requirements of adaptation layer of No.7 signalling interworking with IP MTP2 peer-to-peer adaptation layer	Valid

Similar standards

GB/T 41301   YZ/T 0173   YD/T 1730   GB/T 44462.2   GB/T 44462.3   GB/T 44462.1   

Basic data

Standard ID: GB/T 29198-2012 (GB/T29198-2012)
Description (Translated English): Technical requirements of adaptation layer of No.7 signalling interworking with IP MTP2 peer-to-peer adaptation layer
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: M10
Classification of International Standard: 33.040.30
Word Count Estimation: 32,357
Quoted Standard: GB/T 28510-2012; GF 001-9001; ITU-T Q.2140; ITU-T Q.2210; IETF RFC3788
Adopted Standard: IETF RFC4165-2005, NEQ
Regulation (derived from): National Standards Bulletin No. 41 of 2012
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the No. 7 signaling messaging part of the second -level peer adaptation layer (M2PA) protocol functions, message parameters, formats and procedures. This standard applies to adopt M2PA signaling transport protocol as the IP signali

GB/T 29198-2012: Technical requirements of adaptation layer of No.7 signalling interworking with IP MTP2 peer-to-peer adaptation layer

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical requirements of adaptation layer of No.7 signalling interworking with IP.MTP2 peer-to-peer adaptation layer ICS 33.040.30 M10 National Standards of People's Republic of China No.7 signaling adaptation layer and IP interworking technical requirements Message Transfer Part (MTP) second stage peer adaptation layer (M2PA) [IETFRFC4165.2005, Signalingsystem7 (SS7) messagetransfer Part 2 (MTP2) -Userpeer-to-peeradaptationlayer (M2PA), NEQ] Issued on. 2012-12-31 2013-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms, Definitions and Abbreviations 1 3.1 Terms and definitions 3.2 Abbreviations 2 4 Summary 3 4.1 signaling transport structure 3 4.2 signaling point represent 4 4.3 M2PA provide services 4 Function provided 4.4 M2PA 5 5 4.5 M2PA defined boundaries 4.6 M2PA information registered in the IANA 6 5 6 Message Format 5.1 Public header 6 5.2 M2PA dedicated message header 7 5.3 M2PA message 8 5.4 Extended switching command switching and extended acknowledgment message (XCO and XCA) 10 6 M2PA link state control 11 6.1 SCTP coupling state control 11 6.2 M2PA link state control 11 7 program 11 7.1 Basic Principle 11 7.2 features support MTP2 program 12 7.3 supports the MTP3/MTP2 interface program 15 8 timer 16 9 Security 16 Appendix A (normative appendix) M2PA program Example 17 Annex B (informative) correspondence between the coupling and M2PA link 25 Appendix C (Informative Appendix) SCTP slow start on M2PA 28

Foreword

This standard is "No.7 signaling adaptation layer and IP interworking technical requirements" of the national standard series, the series of national standards is expected structure as follows. --- No.7 signaling interworking with IP adaptation layer specification message transfer part (MTP) second level user adaptation layer (M2UA); --- No.7 signaling interworking with IP adaptation layer specification message transfer part (MTP) third level User Adaptation Layer (M3UA); --- No.7 signaling interworking with IP adaptation layer specification message transfer part (MTP) second stage peer adaptation layer (M2PA). This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard reference method using redrafted IETFRFC4165.2005 "SS7 Message Transfer Part 2 (MTP2) Users Peer adaptation layer (M2PA) protocol, "prepared with IETFRFC4165.2005 degree of consistency equivalent non. The main differences are as follows. --- Explicitly requested not to send a message to the user data on the distal end processor in the case of failure; --- According to the actual situation of China's network gives recommendations timer ranges. The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China. The standard by the China Communications Standards Association. This standard was drafted. the Ministry of Industry and Information Technology and Telecommunications Research Institute, Shanghai Bell Co., Ltd., ZTE Corporation. The main drafters of this standard. Sheng Lei, Jian Wu Hong, Lu Jun, continued co-Yuan, Shen Lei, Xu Ming, Huang Shaojun peak. No.7 signaling adaptation layer and IP interworking technical requirements Message Transfer Part (MTP) second stage peer adaptation layer (M2PA)

1 Scope

This standard specifies the functional No.7 signaling message transfer part of the second stage peer adaptation layer (M2PA) protocol, message parameters, formats, and program. This standard applies to adoption M2PA protocol as the signaling transport protocol adapter IP signaling points, signaling gateways and other equipment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 28510-2012 stream control transmission protocol (SCTP) GF001-9001 Chinese domestic telephone network No.7 signaling specifications Service specific coordination function ITU-TQ.2140 B-ISDN signaling ATM adaptation layer network node interface signaling (SSCF- NNI) (B-ISDNATMadaptationlayer-Servicespecificcoordinationfunctionforsignalingatthenet- worknodeinterface (SSCFATNNI)) Message Transfer Part level 3 functions and messages using the ITU-TQ.2210 ITU-TQ.2140 business (Messagetransfer partlevel3functionsandmessagesusingtheservicesofITU-TrecommendationQ.2140) Security Considerations IETFRFC3788 signaling transport protocol (Securityconsiderationsforsignalingtransportproto- cols) 3 Terms, definitions and abbreviations 3.1 Terms and Definitions GB/T 28510-2012 define the following terms and definitions apply to this document. 3.1.1 MTP2 user MTP2-User Using a protocol MTP2 service. MTP2 only users MTP3. MTP2 users equal M2PA users. 3.1.2 Signaling points signalingendpoint Origination or termination signaling messages No.7 signaling point. 3.1.3 IP signaling point IPsignalingpoint With IP network connections, use the IP bearer No.7 signaling No.7 signaling point. 3.1.4 Signaling Gateway signalinggateway In IP network and SCN signaling bearer network boundaries for conversion devices. In this case, both for a SG No.7 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 29198-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 29198-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 29198-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 29198-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.