GB/T 29156-2012 English PDF

US$349.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29156-2012: Production life cycle assessment specification for metal-plastic decorative panel (Product category rules)
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 29156-2012	349	Add to Cart	3 days	Production life cycle assessment specification for metal-plastic decorative panel (Product category rules)	Valid

Similar standards

GB/T 24021   GB/T 24031   GB/T 34666.2   GB/T 43678   GB/T 43677   GB/T 29157   

Basic data

Standard ID: GB/T 29156-2012 (GB/T29156-2012)
Description (Translated English): Production life cycle assessment specification for metal-plastic decorative panel (Product category rules)
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Z00
Classification of International Standard: 13.020.10
Word Count Estimation: 15,186
Quoted Standard: GB/T 24024-2001; GB/T 24025-2009; GB/T 24040-2008; GB/T 24044-2008
Regulation (derived from): National Standards Bulletin No. 41 of 2012
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the metal composite decorative plate production life cycle assessment of the basic rules and requirements. This standard applies to plastic as core, two three-tier structure for the metal plates decorative plates.

GB/T 29156-2012: Production life cycle assessment specification for metal-plastic decorative panel (Product category rules)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Production life cycle assessment specification for metal-plastic decorative panel (Product category rules) ICS 13.020.10 Z00 National Standards of People's Republic of China Metal composite decorative plates Production Life Cycle Assessment Technical Specification (Product Category Rules) Issued on. 2012-12-31 2013-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is managed by the National Standardization Technical Committee on Environment (SAC/TC207) and focal points. This standard was drafted. China Building Materials Science Research Institute, China National Institute of Standardization, China Building Materials Certification & Inspection Group shares have Ltd., Sichuan University, Shunde Red Island Industrial Co., Ltd., Shanghai Huayuan New Composite Materials Co., Ltd., Dongguan, Ertai decorative materials Expected Ltd., Jiangyin city in the color plate Ltd., Shanghai auspicious Technology (Group) Co., Ltd. Dong'e Blue Sky Rainbow Building Materials Co., Union Co-Metal Technology (Hangzhou) Co., Ltd., Jiangsu Science and Technology Development Co., Ltd. Cheng Association. The main drafters of this standard. Jiang Quan, Huang Jin, Wang Hongtao, Zhaochun Zhi, Lin Ling, MA Li-ping, Chen Lu, Wang Wenbiao, Hou Ping, Liang Hui-chao, according to Zhang Kun, Jiang Rong row, Guo Lu, Jin Xing, Duzuo Zheng, Xu Ming Sen, Shi Weiliang, Zhurong Ping, Yin Qiang, Wang Xian, the Dai Yijun, Chen Jianmin, Wang Jianxing.

Introduction

LCA technical specifications, also known as the Product Category Rules (PCR, productcategoryrules), is one or more production Varieties class Ⅲ environmental declarations (EPD, environmentalproductdeclarations) should follow a set of rules, requirements and guide. The contents of this standard provides requirements for the type Ⅲ environmental declarations (EPD) of the index parameter. Ⅲ based environmental declarations (EPD) of the standard preparation, including the life cycle environmental information produced products of specific producers, one Surface can provide reliable and comparable environmental information buyers choose environmentally friendly products, on the other hand also for producers to improve our products Environmental performance to provide data support. Organizations Ⅲ environmental declarations (EPD) should ensure that data is third party independent verification to increase newspaper Report accuracy and credibility. Metal composite decorative plates Production Life Cycle Assessment Technical Specification (Product Category Rules)

1 Scope

This standard specifies the decorative metal composite plate production life cycle assessment of the basic rules and requirements. This standard applies to plastic as the core, both sides of the three-layer structure of a metal plate decorative plates.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 24024-2001 Environmental labels and declarations - Type Ⅰ environmental labeling - Principles and procedures (ISO 14024. 1999, EnvironmentalManagement-Environmentallabelsanddeclarations-TypeⅠenvironmentalla- beling-Principlesandprocedures, IDT) GB/T 24025-2009 Environmental labels and declarations Ⅲ environmental declarations of principles and procedures (ISO 14025.2006, Environmentallabels and declarations-Type Ⅲ environmental declarations-Principles and procedures, IDT) GB/T 24040-2008 Environmental management - Life cycle assessment - Principles and framework (ISO 14040.2006, Environmental management-Lifecycleassessment-Principlesandframework, IDT) GB/T 24044-2008 Environmental management - Life cycle assessment - Requirements and guidelines (ISO 14044.2006, Environmental management-Lifecycleassessment-Requirementsandguidelines, IDT)

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Product Category productcategory Functionally equivalent product groups. [GB/T 24024-2001, the definition 3.3] 3.2 Product Category Rules productcategoryrules (PCR) One or more product categories were set specific rules Ⅲ environmental declarations that must be met, requirements and guidelines. [GB/T 24025-2009, the definition 3.5] 3.3 Metal composite decorative sheet metal-plasticdecorativepanel Plastic as the core, both sides of the three-layer composite sheet metal and product surface covered with a coating or film decorative and protective as The decorative surface. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 29156-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 29156-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 29156-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 29156-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.